thermo Directory Reference

Directory dependency graph for thermo:

Files
file	BinarySolutionTabulatedThermo.h [code]
	Header file for an binary solution model with tabulated standard state thermodynamic data (see Thermodynamic Properties and class BinarySolutionTabulatedThermo).
file	ConstCpPoly.h [code]
	Headers for the SpeciesThermoInterpType object that employs a constant heat capacity assumption (see Species Reference-State Thermodynamic Properties and ConstCpPoly).
file	CoverageDependentSurfPhase.h [code]
	Header for a thermodynamics model of a coverage-dependent surface phase derived from SurfPhase, applying adsorbate lateral interaction correction factors to the SurfPhase thermodynamic properties.
file	DebyeHuckel.h [code]
	Headers for the DebyeHuckel ThermoPhase object, which models dilute electrolyte solutions (see Thermodynamic Properties and DebyeHuckel ) .
file	EdgePhase.h [code]
	Declarations for the EdgePhase ThermoPhase object, which models the interface between two surfaces (see Thermodynamic Properties and EdgePhase).
file	electrolytes.h [code]
	Header file for a common definitions used in electrolytes thermodynamics.
file	Elements.h [code]
	Contains the getElementWeight function and the definitions of element constraint types.
file	GibbsExcessVPSSTP.h [code]
	Header for intermediate ThermoPhase object for phases which employ Gibbs excess free energy based formulations (see Thermodynamic Properties and class GibbsExcessVPSSTP).
file	HMWSoln.h [code]
	Headers for the HMWSoln ThermoPhase object, which models concentrated electrolyte solutions (see Thermodynamic Properties and HMWSoln ) .
file	IdealGasPhase.h [code]
	ThermoPhase object for the ideal gas equation of state - workhorse for Cantera (see Thermodynamic Properties and class IdealGasPhase).
file	IdealMolalSoln.h [code]
	ThermoPhase object for the ideal molal equation of state (see Thermodynamic Properties and class IdealMolalSoln).
file	IdealSolidSolnPhase.h [code]
	Header file for an ideal solid solution model with incompressible thermodynamics (see Thermodynamic Properties and IdealSolidSolnPhase).
file	IdealSolnGasVPSS.h [code]
	Definition file for a derived class of ThermoPhase that assumes an ideal solution approximation and handles variable pressure standard state methods for calculating thermodynamic properties (see Thermodynamic Properties and class IdealSolnGasVPSS).
file	LatticePhase.h [code]
	Header for a simple thermodynamics model of a bulk phase derived from ThermoPhase, assuming a lattice of solid atoms (see Thermodynamic Properties and class LatticePhase).
file	LatticeSolidPhase.h [code]
	Header for a simple thermodynamics model of a bulk solid phase derived from ThermoPhase, assuming an ideal solution model based on a lattice of solid atoms (see Thermodynamic Properties and class LatticeSolidPhase).
file	MargulesVPSSTP.h [code]
	(see Thermodynamic Properties and class MargulesVPSSTP).
file	MetalPhase.h [code]
file	MixtureFugacityTP.h [code]
	Header file for a derived class of ThermoPhase that handles non-ideal mixtures based on the fugacity models (see Thermodynamic Properties and class MixtureFugacityTP).
file	MolalityVPSSTP.h [code]
	Header for intermediate ThermoPhase object for phases which employ molality based activity coefficient formulations (see Thermodynamic Properties and class MolalityVPSSTP).
file	Mu0Poly.h [code]
	Header for a single-species standard state object derived from SpeciesThermoInterpType based on a piecewise constant mu0 interpolation (see Species Reference-State Thermodynamic Properties and class Mu0Poly).
file	MultiSpeciesThermo.h [code]
	Header for a general species thermodynamic property manager for a phase (see MultiSpeciesThermo).
file	Nasa9Poly1.h [code]
	Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA 9 coefficient temperature polynomial form applied to one temperature region (see Species Reference-State Thermodynamic Properties and class Nasa9Poly1).
file	Nasa9PolyMultiTempRegion.h [code]
	Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA 9 coefficient temperature polynomial form applied to multiple temperature regions (see Species Reference-State Thermodynamic Properties and class Nasa9PolyMultiTempRegion).
file	NasaPoly1.h [code]
	Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA temperature polynomial form applied to one temperature region (see Species Reference-State Thermodynamic Properties and class NasaPoly1).
file	NasaPoly2.h [code]
	Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA temperature polynomial form applied to two temperature regions (see Species Reference-State Thermodynamic Properties and class NasaPoly2).
file	PDSS.h [code]
	Declarations for the virtual base class PDSS (pressure dependent standard state) which handles calculations for a single species in a phase (see Species Standard-State Thermodynamic Properties and class PDSS).
file	PDSS_ConstVol.h [code]
	Declarations for the class PDSS_ConstVol (pressure dependent standard state) which handles calculations for a single species with a constant molar volume in a phase (see class Species Standard-State Thermodynamic Properties and PDSS_ConstVol).
file	PDSS_HKFT.h [code]
	Declarations for the class PDSS_HKFT (pressure dependent standard state) which handles calculations for a single species in a phase using the HKFT standard state (see Species Standard-State Thermodynamic Properties and class PDSS_HKFT).
file	PDSS_SSVol.h [code]
	Declarations for the class PDSS_SSVol (pressure dependent standard state) which handles calculations for a single species with an expression for the standard state molar volume in a phase given by an enumerated data type (see class Species Standard-State Thermodynamic Properties and PDSS_SSVol).
file	PDSS_Water.h [code]
	Implementation of a pressure dependent standard state virtual function for a Pure Water Phase (see Species Standard-State Thermodynamic Properties and class PDSS_Water).
file	PDSSFactory.h [code]
file	PengRobinson.h [code]
file	Phase.h [code]
	Header file for class Phase.
file	PlasmaPhase.h [code]
	Header file for class PlasmaPhase.
file	PureFluidPhase.h [code]
	Header for a ThermoPhase class for a pure fluid phase consisting of gas, liquid, mixed-gas-liquid and supercritical fluid (see Thermodynamic Properties and class PureFluidPhase).
file	RedlichKisterVPSSTP.h [code]
	(see Thermodynamic Properties and class RedlichKisterVPSSTP).
file	RedlichKwongMFTP.h [code]
file	ShomatePoly.h [code]
	Header for a single-species standard state object derived from SpeciesThermoInterpType based on the Shomate temperature polynomial form applied to one temperature region (see Species Reference-State Thermodynamic Properties and class ShomatePoly and ShomatePoly2).
file	SingleSpeciesTP.h [code]
	Header for the SingleSpeciesTP class, which is a filter class for ThermoPhase, that eases the construction of single species phases ( see Thermodynamic Properties and class SingleSpeciesTP).
file	Species.h [code]
	Declaration for class Cantera::Species.
file	SpeciesThermoFactory.h [code]
	Header for factory functions to build instances of classes that manage the standard-state thermodynamic properties of a set of species (see Species Reference-State Thermodynamic Properties);.
file	SpeciesThermoInterpType.h [code]
	Pure Virtual Base class for individual species reference state thermodynamic managers and text for the spthermo module (see Species Reference-State Thermodynamic Properties and class SpeciesThermoInterpType ).
file	speciesThermoTypes.h [code]
	Contains const definitions for types of species reference-state thermodynamics managers (see Species Reference-State Thermodynamic Properties)
file	StoichSubstance.h [code]
	Header file for the StoichSubstance class, which represents a fixed-composition incompressible substance (see Thermodynamic Properties and class StoichSubstance)
file	SurfPhase.h [code]
	Header for a simple thermodynamics model of a surface phase derived from ThermoPhase, assuming an ideal solution model (see Thermodynamic Properties and class SurfPhase).
file	ThermoFactory.h [code]
	Headers for the factory class that can create known ThermoPhase objects (see Thermodynamic Properties and class ThermoFactory).
file	ThermoPhase.h [code]
	Header file for class ThermoPhase, the base class for phases with thermodynamic properties, and the text for the Module thermoprops (see Thermodynamic Properties and class ThermoPhase).
file	VPStandardStateTP.h [code]
	Header file for a derived class of ThermoPhase that handles variable pressure standard state methods for calculating thermodynamic properties (see Thermodynamic Properties and class VPStandardStateTP).
file	WaterProps.h [code]
	Header for a class used to house several approximation routines for properties of water.
file	WaterPropsIAPWS.h [code]
	Headers for a class for calculating the equation of state of water from the IAPWS 1995 Formulation based on the steam tables thermodynamic basis (See class WaterPropsIAPWS).
file	WaterPropsIAPWSphi.h [code]
	Header for Lowest level of the classes which support a real water model (see class WaterPropsIAPWS and class WaterPropsIAPWSphi).
file	WaterSSTP.h [code]
	Declares a ThermoPhase class consisting of pure water (see Thermodynamic Properties and class WaterSSTP).