A class for freely-propagating premixed flames. More...

#include <StFlow.h>

Inheritance diagram for FreeFlame:

Collaboration diagram for FreeFlame:

Public Member Functions
	FreeFlame (IdealGasPhase *ph=0, size_t nsp=1, size_t points=1)

virtual void	eval (size_t j, doublereal x, doublereal r, integer *mask, doublereal rdt)
	Evaluate the residual function for axisymmetric stagnation flow.

virtual std::string	flowType ()

virtual bool	fixed_mdot ()

int	domainType ()
	Domain type flag.

size_t	domainIndex ()
	The left-to-right location of this domain.

bool	isConnector ()
	True if the domain is a connector domain.

const OneDim &	container () const
	The container holding this domain.

void	setContainer (OneDim *c, size_t index)
	Specify the container object for this domain, and the position of this domain in the list.

void	setBandwidth (int bw=-1)

size_t	bandwidth ()
	Set the Jacobian bandwidth for this domain.

virtual void	setInitialState (doublereal *xlocal=0)

Refiner &	refiner ()
	Return a reference to the grid refiner.

size_t	nComponents () const
	Number of components at each grid point.

void	checkComponentIndex (size_t n) const
	Check that the specified component index is in range Throws an exception if n is greater than nComponents()-1.

void	checkComponentArraySize (size_t nn) const
	Check that an array size is at least nComponents() Throws an exception if nn is less than nComponents().

size_t	nPoints () const
	Number of grid points in this domain.

void	checkPointIndex (size_t n) const
	Check that the specified point index is in range Throws an exception if n is greater than nPoints()-1.

void	checkPointArraySize (size_t nn) const
	Check that an array size is at least nPoints() Throws an exception if nn is less than nPoints().

void	setComponentName (size_t n, std::string name)

void	setComponentType (size_t n, int ctype)

void	setBounds (size_t nl, const doublereal lower, size_t nu, const doublereal upper)
	Set the lower and upper bounds for each solution component.

void	setBounds (size_t n, doublereal lower, doublereal upper)

void	setTolerances (size_t nr, const doublereal rtol, size_t na, const doublereal atol, int ts=0)
	set the error tolerances for all solution components.

void	setTolerances (size_t n, doublereal rtol, doublereal atol, int ts=0)
	set the error tolerances for solution component n.

void	setTolerances (doublereal rtol, doublereal atol, int ts=0)
	set scalar error tolerances.

void	setTolerancesTS (doublereal rtol, doublereal atol)

void	setTolerancesSS (doublereal rtol, doublereal atol)

doublereal	rtol (size_t n)
	Relative tolerance of the nth component.

doublereal	atol (size_t n)
	Absolute tolerance of the nth component.

doublereal	upperBound (size_t n) const
	Upper bound on the nth component.

doublereal	lowerBound (size_t n) const
	Lower bound on the nth component.

void	initTimeInteg (doublereal dt, const doublereal *x0)
	Prepare to do time stepping with time step dt.

void	setSteadyMode ()
	Prepare to solve the steady-state problem.

bool	steady ()
	True if in steady-state mode.

bool	transient ()
	True if not in steady-state mode.

void	needJacUpdate ()
	Set this if something has changed in the governing equations (e.g.

void	evalss (doublereal x, doublereal r, integer *mask)
	Evaluate the steady-state residual at all points, even if in transient mode.

virtual doublereal	residual (doublereal *x, size_t n, size_t j)

int	timeDerivativeFlag (size_t n)

void	setAlgebraic (size_t n)

virtual void	update (doublereal *x)
	Does nothing.

doublereal	time () const

void	incrementTime (doublereal dt)

size_t	index (size_t n, size_t j) const

doublereal	value (const doublereal *x, size_t n, size_t j) const

size_t	size () const

void	locate ()
	Find the index of the first grid point in this domain, and the start of its variables in the global solution vector.

virtual size_t	loc (size_t j=0) const
	Location of the start of the local solution vector in the global solution vector,.

size_t	firstPoint () const
	The index of the first (i.e., left-most) grid point belonging to this domain.

size_t	lastPoint () const
	The index of the last (i.e., right-most) grid point belonging to this domain.

void	linkLeft (Domain1D *left)
	Set the left neighbor to domain 'left.

void	linkRight (Domain1D *right)
	Set the right neighbor to domain 'right.

void	append (Domain1D *right)
	Append domain 'right' to this one, and update all links.

Domain1D *	left () const
	Return a pointer to the left neighbor.

Domain1D *	right () const
	Return a pointer to the right neighbor.

double	prevSoln (size_t n, size_t j) const
	Value of component n at point j in the previous solution.

void	setID (const std::string &s)
	Specify an identifying tag for this domain.

std::string	id () const

void	setDesc (const std::string &s)
	Specify descriptive text for this domain.

const std::string &	desc ()

virtual void	getTransientMask (integer *mask)

virtual void	showSolution_s (std::ostream &s, const doublereal *x)

doublereal	z (size_t jlocal) const

doublereal	zmin () const

doublereal	zmax () const

void	setProfile (std::string name, doublereal values, doublereal soln)

vector_fp &	grid ()

const vector_fp &	grid () const

doublereal	grid (size_t point)

void	setGrid (size_t n, const doublereal *z)

virtual doublereal	initialValue (size_t n, size_t j)
	Initial value of solution component n at grid point j.

Public Attributes
doublereal	m_zfixed

doublereal	m_tfixed

bool	m_adiabatic

Protected Attributes
doublereal	m_rdt

size_t	m_nv

size_t	m_points

vector_fp	m_slast

doublereal	m_time

vector_fp	m_max

vector_fp	m_min

vector_fp	m_rtol_ss

vector_fp	m_rtol_ts

vector_fp	m_atol_ss

vector_fp	m_atol_ts

vector_fp	m_z

OneDim *	m_container

size_t	m_index

int	m_type

size_t	m_iloc
	Starting location within the solution vector for unknowns that correspond to this domain.

size_t	m_jstart

Domain1D *	m_left

Domain1D *	m_right

std::string	m_id
	Identity tag for the domain.

std::string	m_desc

Refiner *	m_refiner

vector_int	m_td

std::vector< std::string >	m_name

int	m_bw

Problem Specification
virtual void	setupGrid (size_t n, const doublereal *z)

thermo_t &	phase ()

Kinetics &	kinetics ()

virtual void	init ()
	Initialize.

void	setThermo (IdealGasPhase &th)
	Set the thermo manager.

void	setKinetics (Kinetics &kin)
	Set the kinetics manager. The kinetics manager must.

void	setTransport (Transport &trans, bool withSoret=false)
	set the transport manager

void	enableSoret (bool withSoret)

bool	withSoret () const

void	setPressure (doublereal p)
	Set the pressure.

virtual void	setState (size_t point, const doublereal state, doublereal x)

virtual void	_getInitialSoln (doublereal *x)
	Write the initial solution estimate into array x.

virtual void	_finalize (const doublereal *x)
	In some cases, a domain may need to set parameters that depend on the initial solution estimate.

void	setFixedTempProfile (vector_fp &zfixed, vector_fp &tfixed)
	Sometimes it is desired to carry out the simulation using a specified temperature profile, rather than computing it by solving the energy equation.

void	setTemperature (size_t j, doublereal t)
	Set the temperature fixed point at grid point j, and disable the energy equation so that the solution will be held to this value.

void	setMassFraction (size_t j, size_t k, doublereal y)
	Set the mass fraction fixed point for species k at grid point j, and disable the species equation so that the solution will be held to this value.

doublereal	T_fixed (size_t j) const
	The fixed temperature value at point j.

doublereal	Y_fixed (size_t k, size_t j) const
	The fixed mass fraction value of species k at point j.

virtual std::string	componentName (size_t n) const
	Name of the nth component. May be overloaded.

size_t	componentIndex (std::string name) const

virtual void	showSolution (const doublereal *x)
	Print the solution.

virtual void	save (XML_Node &o, const doublereal *const sol)
	Save the current solution for this domain into an XML_Node.

virtual void	restore (const XML_Node &dom, doublereal *soln)

void	solveEnergyEqn (size_t j=npos)

void	fixTemperature (size_t j=npos)

bool	doSpecies (size_t k)

bool	doEnergy (size_t j)

void	solveSpecies (size_t k=npos)

void	fixSpecies (size_t k=npos)

void	integrateChem (doublereal *x, doublereal dt)

void	resize (size_t components, size_t points)
	Change the grid size.

virtual void	setFixedPoint (int j0, doublereal t0)

void	setJac (MultiJac *jac)

void	setGas (const doublereal *x, size_t j)
	Set the gas object state to be consistent with the solution at point j.

void	setGasAtMidpoint (const doublereal *x, size_t j)
	Set the gas state to be consistent with the solution at the midpoint between j and j + 1.

doublereal	density (size_t j) const

void	setViscosityFlag (bool dovisc)

doublereal	m_inlet_u

doublereal	m_inlet_V

doublereal	m_inlet_T

doublereal	m_rho_inlet

vector_fp	m_yin

doublereal	m_surface_T

doublereal	m_press

vector_fp	m_dz

vector_fp	m_rho

vector_fp	m_wtm

vector_fp	m_wt

vector_fp	m_cp

vector_fp	m_enth

vector_fp	m_visc

vector_fp	m_tcon

vector_fp	m_diff

vector_fp	m_multidiff

Array2D	m_dthermal

Array2D	m_flux

Array2D	m_wdot

vector_fp	m_surfdot

size_t	m_nsp

IdealGasPhase *	m_thermo

Kinetics *	m_kin

Transport *	m_trans

MultiJac *	m_jac

bool	m_ok

std::vector< bool >	m_do_energy

bool	m_do_soret

std::vector< bool >	m_do_species

int	m_transport_option

Array2D	m_fixedy

vector_fp	m_fixedtemp

vector_fp	m_zfix

vector_fp	m_tfix

bool	m_dovisc

doublereal	component (const doublereal *x, size_t i, size_t j) const

doublereal	conc (const doublereal *x, size_t k, size_t j) const

doublereal	cbar (const doublereal *x, size_t k, size_t j) const

doublereal	wdot (size_t k, size_t j) const

void	getWdot (doublereal *x, size_t j)
	write the net production rates at point j into array m_wdot

void	updateThermo (const doublereal *x, size_t j0, size_t j1)
	update the thermodynamic properties from point j0 to point j1 (inclusive), based on solution x.

doublereal	cdif2 (const doublereal x, size_t n, size_t j, const doublereal f) const

doublereal	T (const doublereal *x, size_t j) const

doublereal &	T (doublereal *x, size_t j)

doublereal	T_prev (size_t j) const

doublereal	rho_u (const doublereal *x, size_t j) const

doublereal	u (const doublereal *x, size_t j) const

doublereal	V (const doublereal *x, size_t j) const

doublereal	V_prev (size_t j) const

doublereal	lambda (const doublereal *x, size_t j) const

doublereal	Y (const doublereal *x, size_t k, size_t j) const

doublereal &	Y (doublereal *x, size_t k, size_t j)

doublereal	Y_prev (size_t k, size_t j) const

doublereal	X (const doublereal *x, size_t k, size_t j) const

doublereal	flux (size_t k, size_t j) const

doublereal	dVdz (const doublereal *x, size_t j) const

doublereal	dYdz (const doublereal *x, size_t k, size_t j) const

doublereal	dTdz (const doublereal *x, size_t j) const

doublereal	shear (const doublereal *x, size_t j) const

doublereal	divHeatFlux (const doublereal *x, size_t j) const

size_t	mindex (size_t k, size_t j, size_t m)

void	updateDiffFluxes (const doublereal *x, size_t j0, size_t j1)
	Update the diffusive mass fluxes.

void	updateTransport (doublereal *x, size_t j0, size_t j1)
	Update the transport properties at grid points in the range from j0 to j1, based on solution x.

Detailed Description

A class for freely-propagating premixed flames.

Definition at line 525 of file StFlow.h.

Member Function Documentation

void eval	(	size_t	jg,
		doublereal *	xg,
		doublereal *	rg,
		integer *	diagg,
		doublereal	rdt
	)

virtual

Evaluate the residual function for axisymmetric stagnation flow.

If jpt is less than zero, the residual function is evaluated at all grid points. If jpt >= 0, then the residual function is only evaluated at grid points jpt-1, jpt, and jpt+1. This option is used to efficiently evaluate the Jacobian numerically.

Reimplemented from Domain1D.

Definition at line 646 of file StFlow.cpp.

References IdealGasPhase::cp_R_ref(), IdealGasPhase::enthalpy_RT_ref(), Domain1D::firstPoint(), Cantera::GasConstant, StFlow::getWdot(), Domain1D::lastPoint(), Domain1D::loc(), ckr::min(), Cantera::npos, StFlow::setGas(), StFlow::T_fixed(), StFlow::updateDiffFluxes(), StFlow::updateThermo(), and StFlow::updateTransport().

virtual void init ( )

inlinevirtualinherited

Initialize.

This method is called by OneDim::init() for each domain once at the beginning of a simulation. Base class method does nothing, but may be overloaded.

Reimplemented from Domain1D.

Definition at line 82 of file StFlow.h.

void setThermo ( IdealGasPhase & th )

inlineinherited

Set the thermo manager.

Note that the flow equations assume the ideal gas equation.

Definition at line 89 of file StFlow.h.

void setKinetics ( Kinetics & kin )

inlineinherited

Set the kinetics manager. The kinetics manager must.

Definition at line 94 of file StFlow.h.

void setTransport	(	Transport &	trans,
		bool	withSoret = `false`
	)

inherited

set the transport manager

Install a transport manager.

Definition at line 242 of file StFlow.cpp.

References Transport::model(), and Array2D::resize().

void setPressure ( doublereal p )

inlineinherited

Set the pressure.

Since the flow equations are for the limit of small Mach number, the pressure is very nearly constant throughout the flow.

Definition at line 108 of file StFlow.h.

virtual void setState	(	size_t	point,
		const doublereal *	state,
		doublereal *	x
	)

inlinevirtualinherited

Todo:: remove? may be unused

Reimplemented from Domain1D.

Definition at line 114 of file StFlow.h.

References StFlow::setMassFraction(), and StFlow::setTemperature().

virtual void _getInitialSoln ( doublereal * x )

inlinevirtualinherited

Write the initial solution estimate into array x.

Reimplemented from Domain1D.

Definition at line 125 of file StFlow.h.

References StFlow::T_fixed(), and StFlow::Y_fixed().

void _finalize ( const doublereal * x )

virtualinherited

In some cases, a domain may need to set parameters that depend on the initial solution estimate.

In such cases, the parameters may be set in method _finalize. This method is called just before the Newton solver is called, and the x array is guaranteed to be the local solution vector for this domain that will be used as the initial guess. If no such parameters need to be set, then method _finalize does not need to be overloaded.

Reimplemented from Domain1D.

Definition at line 306 of file StFlow.cpp.

References Cantera::linearInterp(), StFlow::setMassFraction(), and StFlow::setTemperature().

void setFixedTempProfile	(	vector_fp &	zfixed,
		vector_fp &	tfixed
	)

inlineinherited

Sometimes it is desired to carry out the simulation using a specified temperature profile, rather than computing it by solving the energy equation.

This method specifies this profile.

Definition at line 141 of file StFlow.h.

void setTemperature	(	size_t	j,
		doublereal	t
	)

inlineinherited

Set the temperature fixed point at grid point j, and disable the energy equation so that the solution will be held to this value.

Definition at line 151 of file StFlow.h.

Referenced by StFlow::_finalize(), and StFlow::setState().

void setMassFraction	(	size_t	j,
		size_t	k,
		doublereal	y
	)

inlineinherited

Set the mass fraction fixed point for species k at grid point j, and disable the species equation so that the solution will be held to this value.

note: in practice, the species are hardly ever held fixed.

Definition at line 162 of file StFlow.h.

Referenced by StFlow::_finalize(), and StFlow::setState().

doublereal T_fixed ( size_t j ) const

inlineinherited

The fixed temperature value at point j.

Definition at line 169 of file StFlow.h.

Referenced by StFlow::_getInitialSoln(), AxiStagnFlow::eval(), and FreeFlame::eval().

doublereal Y_fixed	(	size_t	k,
		size_t	j
	)		const

inlineinherited

The fixed mass fraction value of species k at point j.

Definition at line 175 of file StFlow.h.

Referenced by StFlow::_getInitialSoln().

string componentName ( size_t n ) const

virtualinherited

Name of the nth component. May be overloaded.

Reimplemented from Domain1D.

Definition at line 985 of file StFlow.cpp.

References Phase::speciesName().

Referenced by StFlow::showSolution().

void showSolution ( const doublereal * x )

virtualinherited

Print the solution.

Reimplemented from Domain1D.

Definition at line 887 of file StFlow.cpp.

References StFlow::componentName(), StFlow::updateThermo(), and Cantera::writelog().

void save	(	XML_Node &	o,
		const doublereal *const	sol
	)

virtualinherited

Save the current solution for this domain into an XML_Node.

Parameters

o	XML_Node to save the solution to.
sol	Current value of the solution vector. The object will pick out which part of the solution vector pertains to this object.

Reimplemented from Domain1D.

Definition at line 1170 of file StFlow.cpp.

References XML_Node::addAttribute(), ctml::addFloat(), ctml::addFloatArray(), ctml::addString(), DATA_PTR, Array2D::getRow(), Domain1D::loc(), Domain1D::m_id, Array2D::nColumns(), and Phase::speciesName().

void resize	(	size_t	ncomponents,
		size_t	points
	)

virtualinherited

Change the grid size.

Called after grid refinement.

Reimplemented from Domain1D.

Definition at line 197 of file StFlow.cpp.

References Array2D::resize(), and Domain1D::resize().

void setGas	(	const doublereal *	x,
		size_t	j
	)

inherited

Set the gas object state to be consistent with the solution at point j.

Definition at line 280 of file StFlow.cpp.

References Phase::setMassFractions_NoNorm(), IdealGasPhase::setPressure(), and Phase::setTemperature().

Referenced by ReactingSurf1D::eval(), AxiStagnFlow::eval(), FreeFlame::eval(), StFlow::getWdot(), and StFlow::updateThermo().

void setGasAtMidpoint	(	const doublereal *	x,
		size_t	j
	)

inherited

Set the gas state to be consistent with the solution at the midpoint between j and j + 1.

Definition at line 293 of file StFlow.cpp.

References DATA_PTR, Phase::setMassFractions_NoNorm(), IdealGasPhase::setPressure(), and Phase::setTemperature().

Referenced by StFlow::updateTransport().

void getWdot	(	doublereal *	x,
		size_t	j
	)

inlineprotectedinherited

write the net production rates at point j into array m_wdot

Definition at line 303 of file StFlow.h.

References Kinetics::getNetProductionRates(), and StFlow::setGas().

Referenced by AxiStagnFlow::eval(), and FreeFlame::eval().

void updateThermo	(	const doublereal *	x,
		size_t	j0,
		size_t	j1
	)

inlineprotectedinherited

update the thermodynamic properties from point j0 to point j1 (inclusive), based on solution x.

Definition at line 312 of file StFlow.h.

References ThermoPhase::cp_mass(), Phase::density(), Phase::meanMolecularWeight(), and StFlow::setGas().

Referenced by AxiStagnFlow::eval(), FreeFlame::eval(), and StFlow::showSolution().

void updateDiffFluxes	(	const doublereal *	x,
		size_t	j0,
		size_t	j1
	)

protectedinherited

Update the diffusive mass fluxes.

Definition at line 942 of file StFlow.cpp.

Referenced by AxiStagnFlow::eval(), and FreeFlame::eval().

void updateTransport	(	doublereal *	x,
		size_t	j0,
		size_t	j1
	)

protectedinherited

Update the transport properties at grid points in the range from j0 to j1, based on solution x.

Definition at line 590 of file StFlow.cpp.

References DATA_PTR, Cantera::eps(), Transport::getMixDiffCoeffs(), Transport::getMultiDiffCoeffs(), Transport::getThermalDiffCoeffs(), Phase::meanMolecularWeight(), Array2D::ptrColumn(), StFlow::setGasAtMidpoint(), Transport::thermalConductivity(), and Transport::viscosity().

Referenced by AxiStagnFlow::eval(), and FreeFlame::eval().

int domainType ( )

inlineinherited

Domain type flag.

Definition at line 71 of file Domain1D.h.

size_t domainIndex ( )

inlineinherited

The left-to-right location of this domain.

Definition at line 78 of file Domain1D.h.

Referenced by Cantera::bound_step().

bool isConnector ( )

inlineinherited

True if the domain is a connector domain.

Definition at line 85 of file Domain1D.h.

const OneDim& container ( ) const

inlineinherited

The container holding this domain.

Definition at line 92 of file Domain1D.h.

void setContainer	(	OneDim *	c,
		size_t	index
	)

inlineinherited

Specify the container object for this domain, and the position of this domain in the list.

Definition at line 100 of file Domain1D.h.

Referenced by OneDim::addDomain().

size_t bandwidth ( )

inlineinherited

Set the Jacobian bandwidth for this domain.

When class OneDim computes the bandwidth of the overall multi-domain problem (in OneDim::resize()), it calls this method for the bandwidth of each domain. If setBandwidth has not been called, then a negative bandwidth is returned, in which case OneDim assumes that this domain is dense – that is, at each point, all components depend on the value of all other components at that point. In this case, the bandwidth is bw = 2*nComponents() - 1. However, if this domain contains some components that are uncoupled from other components at the same point, then this default bandwidth may greatly overestimate the true bandwidth, with a substantial penalty in performance. For such domains, use method setBandwidth to specify the bandwidth before passing this domain to the Sim1D or OneDim constructor.

Definition at line 129 of file Domain1D.h.

Referenced by OneDim::resize().

Refiner& refiner ( )

inlineinherited

Return a reference to the grid refiner.

Definition at line 172 of file Domain1D.h.

Referenced by Sim1D::refine(), Sim1D::setGridMin(), and Sim1D::setRefineCriteria().

size_t nComponents ( ) const

inlineinherited

Number of components at each grid point.

Definition at line 177 of file Domain1D.h.

Referenced by Cantera::bound_step(), Domain1D::componentIndex(), Inlet1D::eval(), Symm1D::eval(), OutletRes1D::eval(), Surf1D::eval(), ReactingSurf1D::eval(), Inlet1D::init(), OutletRes1D::init(), Cantera::norm_square(), Sim1D::refine(), OneDim::resize(), Sim1D::restore(), Inlet1D::save(), Empty1D::save(), Symm1D::save(), OutletRes1D::save(), Surf1D::save(), ReactingSurf1D::save(), Sim1D::setFixedTemperature(), Sim1D::setInitialGuess(), and MultiNewton::step().

void checkComponentIndex ( size_t n ) const

inlineinherited

Check that the specified component index is in range Throws an exception if n is greater than nComponents()-1.

Definition at line 183 of file Domain1D.h.

void checkComponentArraySize ( size_t nn ) const

inlineinherited

Check that an array size is at least nComponents() Throws an exception if nn is less than nComponents().

Used before calls which take an array pointer.

Definition at line 192 of file Domain1D.h.

size_t nPoints ( ) const

inlineinherited

Number of grid points in this domain.

Definition at line 199 of file Domain1D.h.

Referenced by Cantera::bound_step(), ReactingSurf1D::eval(), Cantera::norm_square(), Sim1D::refine(), OneDim::resize(), Sim1D::setFixedTemperature(), Sim1D::setFlatProfile(), and Sim1D::setProfile().

void checkPointIndex ( size_t n ) const

inlineinherited

Check that the specified point index is in range Throws an exception if n is greater than nPoints()-1.

Definition at line 205 of file Domain1D.h.

void checkPointArraySize ( size_t nn ) const

inlineinherited

Check that an array size is at least nPoints() Throws an exception if nn is less than nPoints().

Used before calls which take an array pointer.

Definition at line 214 of file Domain1D.h.

void setBounds	(	size_t	nl,
		const doublereal *	lower,
		size_t	nu,
		const doublereal *	upper
	)

inlineinherited

Set the lower and upper bounds for each solution component.

Definition at line 254 of file Domain1D.h.

References Cantera::int2str().

Referenced by Inlet1D::init(), Empty1D::init(), Symm1D::init(), OutletRes1D::init(), Surf1D::init(), ReactingSurf1D::init(), and StFlow::StFlow().

void setTolerances	(	size_t	nr,
		const doublereal *	rtol,
		size_t	na,
		const doublereal *	atol,
		int	ts = `0`
	)

inherited

set the error tolerances for all solution components.

Definition at line 16 of file Domain1D.cpp.

References Cantera::int2str().

Referenced by Inlet1D::init(), Empty1D::init(), Symm1D::init(), OutletRes1D::init(), Surf1D::init(), ReactingSurf1D::init(), and StFlow::StFlow().

void setTolerances	(	size_t	n,
		doublereal	rtol,
		doublereal	atol,
		int	ts = `0`
	)

inherited

set the error tolerances for solution component n.

Definition at line 34 of file Domain1D.cpp.

void setTolerances	(	doublereal	rtol,
		doublereal	atol,
		int	ts = `0`
	)

inherited

set scalar error tolerances.

All solution components will have the same relative and absolute error tolerances.

Definition at line 47 of file Domain1D.cpp.

doublereal rtol ( size_t n )

inlineinherited

Relative tolerance of the nth component.

Definition at line 285 of file Domain1D.h.

Referenced by Inlet1D::init(), Empty1D::init(), Symm1D::init(), ReactingSurf1D::init(), Cantera::norm_square(), and StFlow::StFlow().

doublereal atol ( size_t n )

inlineinherited

Absolute tolerance of the nth component.

Definition at line 290 of file Domain1D.h.

Referenced by Inlet1D::init(), Empty1D::init(), Symm1D::init(), ReactingSurf1D::init(), Cantera::norm_square(), and StFlow::StFlow().

doublereal upperBound ( size_t n ) const

inlineinherited

Upper bound on the nth component.

Definition at line 295 of file Domain1D.h.

Referenced by Cantera::bound_step(), and Inlet1D::save().

doublereal lowerBound ( size_t n ) const

inlineinherited

Lower bound on the nth component.

Definition at line 300 of file Domain1D.h.

Referenced by Cantera::bound_step(), and Inlet1D::save().

void initTimeInteg	(	doublereal	dt,
		const doublereal *	x0
	)

inlineinherited

Prepare to do time stepping with time step dt.

Copy the internally-stored solution at the last time step to array x0.

Definition at line 310 of file Domain1D.h.

References Domain1D::loc().

Referenced by OneDim::initTimeInteg().

void setSteadyMode ( )

inlineinherited

Prepare to solve the steady-state problem.

Set the internally-stored reciprocal of the time step to 0,0

Definition at line 319 of file Domain1D.h.

Referenced by OneDim::setSteadyMode().

bool steady ( )

inlineinherited

True if in steady-state mode.

Definition at line 324 of file Domain1D.h.

bool transient ( )

inlineinherited

True if not in steady-state mode.

Definition at line 329 of file Domain1D.h.

void needJacUpdate ( )

inherited

Set this if something has changed in the governing equations (e.g.

Signal that the current Jacobian is no longer valid.

the value of a constant has been changed, so that the last-computed Jacobian is no longer valid. Note: see file OneDim.cpp for the implementation of this method.

Definition at line 391 of file OneDim.cpp.

References OneDim::jacobian(), OneDim::saveStats(), and MultiJac::setAge().

Referenced by Inlet1D::setMoleFractions(), OutletRes1D::setMoleFractions(), and Inlet1D::setSpreadRate().