A kinetics manager for heterogeneous reaction mechanisms. More...

#include <InterfaceKinetics.h>

Inheritance diagram for InterfaceKinetics:

Collaboration diagram for InterfaceKinetics:

Classes
struct	StickData
	Values used for converting sticking coefficients into rate constants. More...

Public Member Functions
	InterfaceKinetics (thermo_t *thermo=0)
	Constructor. More...

virtual std::string	kineticsType () const
	Identifies the Kinetics manager type. More...

void	setElectricPotential (int n, doublereal V)
	Set the electric potential in the nth phase. More...

virtual void	updateROP ()
	Internal routine that updates the Rates of Progress of the reactions. More...

void	_update_rates_T ()
	Update properties that depend on temperature. More...

void	_update_rates_phi ()
	Update properties that depend on the electric potential. More...

void	_update_rates_C ()
	Update properties that depend on the species mole fractions and/or concentration,. More...

void	advanceCoverages (doublereal tstep, double rtol=1.e-7, double atol=1.e-14, double maxStepSize=0, size_t maxSteps=20000, size_t maxErrTestFails=7)
	Advance the surface coverages in time. More...

void	solvePseudoSteadyStateProblem (int ifuncOverride=-1, doublereal timeScaleOverride=1.0)
	Solve for the pseudo steady-state of the surface problem. More...

void	setIOFlag (int ioFlag)

virtual void	updateMu0 ()
	Update the standard state chemical potentials and species equilibrium constant entries. More...

void	updateKc ()
	Update the equilibrium constants and stored electrochemical potentials in molar units for all reversible reactions and for all species. More...

void	applyVoltageKfwdCorrection (doublereal *const kfwd)
	Apply modifications for the forward reaction rate for interfacial charge transfer reactions. More...

void	convertExchangeCurrentDensityFormulation (doublereal *const kfwd)
	When an electrode reaction rate is optionally specified in terms of its exchange current density, adjust kfwd to the standard reaction rate constant form and units. More...

void	setPhaseExistence (const size_t iphase, const int exists)
	Set the existence of a phase in the reaction object. More...

void	setPhaseStability (const size_t iphase, const int isStable)
	Set the stability of a phase in the reaction object. More...

int	phaseExistence (const size_t iphase) const
	Gets the phase existence int for the ith phase. More...

int	phaseStability (const size_t iphase) const
	Gets the phase stability int for the ith phase. More...

virtual void	determineFwdOrdersBV (ElectrochemicalReaction &r, vector_fp &fwdFullorders)

Reaction Rates Of Progress
virtual void	getEquilibriumConstants (doublereal *kc)
	Equilibrium constant for all reactions including the voltage term. More...

void	updateExchangeCurrentQuantities ()
	values needed to convert from exchange current density to surface reaction rate. More...

virtual void	getDeltaGibbs (doublereal *deltaG)
	Return the vector of values for the reaction Gibbs free energy change. More...

virtual void	getDeltaElectrochemPotentials (doublereal *deltaM)
	Return the vector of values for the reaction electrochemical free energy change. More...

virtual void	getDeltaEnthalpy (doublereal *deltaH)
	Return the vector of values for the reactions change in enthalpy. More...

virtual void	getDeltaEntropy (doublereal *deltaS)
	Return the vector of values for the reactions change in entropy. More...

virtual void	getDeltaSSGibbs (doublereal *deltaG)
	Return the vector of values for the reaction standard state Gibbs free energy change. More...

virtual void	getDeltaSSEnthalpy (doublereal *deltaH)
	Return the vector of values for the change in the standard state enthalpies of reaction. More...

virtual void	getDeltaSSEntropy (doublereal *deltaS)
	Return the vector of values for the change in the standard state entropies for each reaction. More...

Reaction Mechanism Informational Query Routines
virtual void	getActivityConcentrations (doublereal *const conc)
	Get the vector of activity concentrations used in the kinetics object. More...

doublereal	electrochem_beta (size_t irxn) const
	Return the charge transfer rxn Beta parameter for the ith reaction. More...

virtual bool	isReversible (size_t i)
	True if reaction i has been declared to be reversible. More...

virtual void	getFwdRateConstants (doublereal *kfwd)
	Return the forward rate constants. More...

virtual void	getRevRateConstants (doublereal *krev, bool doIrreversible=false)
	Return the reverse rate constants. More...

double	effectivePreExponentialFactor (size_t irxn)
	Return effective preexponent for the specified reaction. More...

double	effectiveActivationEnergy_R (size_t irxn)
	Return effective activation energy for the specified reaction. More...

double	effectiveTemperatureExponent (size_t irxn)
	Return effective temperature exponent for the specified reaction. More...

Reaction Mechanism Construction
virtual void	addPhase (thermo_t &thermo)
	Add a phase to the kinetics manager object. More...

virtual void	init ()
	Prepare the class for the addition of reactions, after all phases have been added. More...

virtual void	resizeSpecies ()
	Resize arrays with sizes that depend on the total number of species. More...

virtual bool	addReaction (shared_ptr< Reaction > r)
	Add a single reaction to the mechanism. More...

virtual void	modifyReaction (size_t i, shared_ptr< Reaction > rNew)
	Modify the rate expression associated with a reaction. More...

Public Member Functions inherited from Kinetics
	Kinetics ()
	Default constructor. More...

virtual	~Kinetics ()

	Kinetics (const Kinetics &)=delete
	Kinetics objects are not copyable or assignable. More...

Kinetics &	operator= (const Kinetics &)=delete

size_t	nReactions () const
	Number of reactions in the reaction mechanism. More...

void	checkReactionIndex (size_t m) const
	Check that the specified reaction index is in range Throws an exception if i is greater than nReactions() More...

void	checkReactionArraySize (size_t ii) const
	Check that an array size is at least nReactions() Throws an exception if ii is less than nReactions(). More...

void	checkSpeciesIndex (size_t k) const
	Check that the specified species index is in range Throws an exception if k is greater than nSpecies()-1. More...

void	checkSpeciesArraySize (size_t mm) const
	Check that an array size is at least nSpecies() Throws an exception if kk is less than nSpecies(). More...

size_t	nPhases () const
	The number of phases participating in the reaction mechanism. More...

void	checkPhaseIndex (size_t m) const
	Check that the specified phase index is in range Throws an exception if m is greater than nPhases() More...

void	checkPhaseArraySize (size_t mm) const
	Check that an array size is at least nPhases() Throws an exception if mm is less than nPhases(). More...

size_t	phaseIndex (const std::string &ph) const
	Return the phase index of a phase in the list of phases defined within the object. More...

size_t	surfacePhaseIndex () const
	This returns the integer index of the phase which has ThermoPhase type cSurf. More...

size_t	reactionPhaseIndex () const
	Phase where the reactions occur. More...

thermo_t &	thermo (size_t n=0)
	This method returns a reference to the nth ThermoPhase object defined in this kinetics mechanism. More...

const thermo_t &	thermo (size_t n=0) const

size_t	nTotalSpecies () const
	The total number of species in all phases participating in the kinetics mechanism. More...

size_t	kineticsSpeciesIndex (size_t k, size_t n) const
	The location of species k of phase n in species arrays. More...

std::string	kineticsSpeciesName (size_t k) const
	Return the name of the kth species in the kinetics manager. More...

size_t	kineticsSpeciesIndex (const std::string &nm) const
	This routine will look up a species number based on the input std::string nm. More...

size_t	kineticsSpeciesIndex (const std::string &nm, const std::string &ph) const
	This routine will look up a species number based on the input std::string nm. More...

thermo_t &	speciesPhase (const std::string &nm)
	This function looks up the name of a species and returns a reference to the ThermoPhase object of the phase where the species resides. More...

const thermo_t &	speciesPhase (const std::string &nm) const

thermo_t &	speciesPhase (size_t k)
	This function takes as an argument the kineticsSpecies index (i.e., the list index in the list of species in the kinetics manager) and returns the species' owning ThermoPhase object. More...

size_t	speciesPhaseIndex (size_t k) const
	This function takes as an argument the kineticsSpecies index (i.e., the list index in the list of species in the kinetics manager) and returns the index of the phase owning the species. More...

virtual void	getFwdRatesOfProgress (doublereal *fwdROP)
	Return the forward rates of progress of the reactions. More...

virtual void	getRevRatesOfProgress (doublereal *revROP)
	Return the Reverse rates of progress of the reactions. More...

virtual void	getNetRatesOfProgress (doublereal *netROP)
	Net rates of progress. More...

virtual void	getReactionDelta (const doublereal property, doublereal deltaProperty)
	Change in species properties. More...

virtual void	getRevReactionDelta (const doublereal g, doublereal dg)
	Given an array of species properties 'g', return in array 'dg' the change in this quantity in the reversible reactions. More...

virtual void	getCreationRates (doublereal *cdot)
	Species creation rates [kmol/m^3/s or kmol/m^2/s]. More...

virtual void	getDestructionRates (doublereal *ddot)
	Species destruction rates [kmol/m^3/s or kmol/m^2/s]. More...

virtual void	getNetProductionRates (doublereal *wdot)
	Species net production rates [kmol/m^3/s or kmol/m^2/s]. More...

virtual double	reactantStoichCoeff (size_t k, size_t i) const
	Stoichiometric coefficient of species k as a reactant in reaction i. More...

virtual double	productStoichCoeff (size_t k, size_t i) const
	Stoichiometric coefficient of species k as a product in reaction i. More...

virtual doublereal	reactantOrder (size_t k, size_t i) const
	Reactant order of species k in reaction i. More...

virtual doublereal	productOrder (int k, int i) const
	product Order of species k in reaction i. More...

virtual int	reactionType (size_t i) const
	Flag specifying the type of reaction. More...

std::string	reactionString (size_t i) const
	Return a string representing the reaction. More...

std::string	reactantString (size_t i) const
	Returns a string containing the reactants side of the reaction equation. More...

std::string	productString (size_t i) const
	Returns a string containing the products side of the reaction equation. More...

shared_ptr< Reaction >	reaction (size_t i)
	Return the Reaction object for reaction i. More...

shared_ptr< const Reaction >	reaction (size_t i) const

void	skipUndeclaredSpecies (bool skip)
	Determine behavior when adding a new reaction that contains species not defined in any of the phases associated with this kinetics manager. More...

bool	skipUndeclaredSpecies () const

void	skipUndeclaredThirdBodies (bool skip)
	Determine behavior when adding a new reaction that contains third-body efficiencies for species not defined in any of the phases associated with this kinetics manager. More...

bool	skipUndeclaredThirdBodies () const

doublereal	multiplier (size_t i) const
	The current value of the multiplier for reaction i. More...

virtual void	setMultiplier (size_t i, doublereal f)
	Set the multiplier for reaction i to f. More...

virtual void	invalidateCache ()

virtual std::pair< size_t, size_t >	checkDuplicates (bool throw_err=true) const
	Check for unmarked duplicate reactions and unmatched marked duplicates. More...

void	selectPhase (const doublereal data, const thermo_t phase, doublereal *phase_data)

virtual void	setRoot (std::shared_ptr< Solution > root)
	Set root Solution holding all phase information. More...

Protected Member Functions
SurfaceArrhenius	buildSurfaceArrhenius (size_t i, InterfaceReaction &r, bool replace)
	Build a SurfaceArrhenius object from a Reaction, taking into account the possible sticking coefficient form and coverage dependencies. More...

void	applyStickingCorrection (double T, double *kf)

Protected Member Functions inherited from Kinetics
double	checkDuplicateStoich (std::map< int, double > &r1, std::map< int, double > &r2) const
	Check whether `r1` and `r2` represent duplicate stoichiometries This function returns a ratio if two reactions are duplicates of one another, and 0.0 otherwise. More...

void	checkReactionBalance (const Reaction &R)
	Check that the specified reaction is balanced (same number of atoms for each element in the reactants and products). More...

Protected Attributes
vector_fp	m_grt
	Temporary work vector of length m_kk. More...

std::vector< size_t >	m_revindex
	List of reactions numbers which are reversible reactions. More...

Rate1< SurfaceArrhenius >	m_rates
	Templated class containing the vector of reactions for this interface. More...

bool	m_redo_rates

std::vector< size_t >	m_irrev
	Vector of irreversible reaction numbers. More...

vector_fp	m_conc
	Array of concentrations for each species in the kinetics mechanism. More...

vector_fp	m_actConc
	Array of activity concentrations for each species in the kinetics object. More...

vector_fp	m_mu0
	Vector of standard state chemical potentials for all species. More...

vector_fp	m_mu
	Vector of chemical potentials for all species. More...

vector_fp	m_mu0_Kc
	Vector of standard state electrochemical potentials modified by a standard concentration term. More...

vector_fp	m_phi
	Vector of phase electric potentials. More...

vector_fp	m_pot
	Vector of potential energies due to Voltages. More...

vector_fp	deltaElectricEnergy_
	Storage for the net electric energy change due to reaction. More...

SurfPhase *	m_surf
	Pointer to the single surface phase. More...

ImplicitSurfChem *	m_integrator
	Pointer to the Implicit surface chemistry object. More...

vector_fp	m_beta
	Electrochemical transfer coefficient for the forward direction. More...

std::vector< size_t >	m_ctrxn
	Vector of reaction indexes specifying the id of the charge transfer reactions in the mechanism. More...

std::vector< size_t >	m_ctrxn_BVform
	Vector of Reactions which follow the Butler-Volmer methodology for specifying the exchange current density first. More...

vector_int	m_ctrxn_ecdf
	Vector of booleans indicating whether the charge transfer reaction rate constant is described by an exchange current density rate constant expression. More...

vector_fp	m_StandardConc
	Vector of standard concentrations. More...

vector_fp	m_deltaG0
	Vector of delta G^0, the standard state Gibbs free energies for each reaction. More...

vector_fp	m_deltaG
	Vector of deltaG[] of reaction, the delta Gibbs free energies for each reaction. More...

vector_fp	m_ProdStanConcReac
	Vector of the products of the standard concentrations of the reactants. More...

bool	m_ROP_ok

doublereal	m_temp
	Current temperature of the data. More...

doublereal	m_logtemp
	Current log of the temperature. More...

bool	m_has_coverage_dependence
	Boolean flag indicating whether any reaction in the mechanism has a coverage dependent forward reaction rate. More...

bool	m_has_electrochem_rxns
	Boolean flag indicating whether any reaction in the mechanism has a beta electrochemical parameter. More...

bool	m_has_exchange_current_density_formulation
	Boolean flag indicating whether any reaction in the mechanism is described by an exchange current density expression. More...

int	m_phaseExistsCheck
	Int flag to indicate that some phases in the kinetics mechanism are non-existent. More...

std::vector< bool >	m_phaseExists
	Vector of booleans indicating whether phases exist or not. More...

vector_int	m_phaseIsStable
	Vector of int indicating whether phases are stable or not. More...

std::vector< std::vector< bool > >	m_rxnPhaseIsReactant
	Vector of vector of booleans indicating whether a phase participates in a reaction as a reactant. More...

std::vector< std::vector< bool > >	m_rxnPhaseIsProduct
	Vector of vector of booleans indicating whether a phase participates in a reaction as a product. More...

std::vector< StickData >	m_stickingData
	Data for sticking reactions. More...

int	m_ioFlag

size_t	m_nDim
	Number of dimensions of reacting phase (2 for InterfaceKinetics, 1 for EdgeKinetics) More...

Protected Attributes inherited from Kinetics
StoichManagerN	m_reactantStoich
	Stoichiometry manager for the reactants for each reaction. More...

StoichManagerN	m_revProductStoich
	Stoichiometry manager for the products of reversible reactions. More...

StoichManagerN	m_irrevProductStoich
	Stoichiometry manager for the products of irreversible reactions. More...

size_t	m_kk
	The number of species in all of the phases that participate in this kinetics mechanism. More...

vector_fp	m_perturb
	Vector of perturbation factors for each reaction's rate of progress vector. More...

std::vector< shared_ptr< Reaction > >	m_reactions
	Vector of Reaction objects represented by this Kinetics manager. More...

std::vector< thermo_t * >	m_thermo
	m_thermo is a vector of pointers to ThermoPhase objects that are involved with this kinetics operator More...

std::vector< size_t >	m_start
	m_start is a vector of integers specifying the beginning position for the species vector for the n'th phase in the kinetics class. More...

std::map< std::string, size_t >	m_phaseindex
	Mapping of the phase name to the position of the phase within the kinetics object. More...

size_t	m_surfphase
	Index in the list of phases of the one surface phase. More...

size_t	m_rxnphase
	Phase Index where reactions are assumed to be taking place. More...

size_t	m_mindim
	number of spatial dimensions of lowest-dimensional phase. More...

vector_fp	m_rfn
	Forward rate constant for each reaction. More...

vector_fp	m_rkcn
	Reciprocal of the equilibrium constant in concentration units. More...

vector_fp	m_ropf
	Forward rate-of-progress for each reaction. More...

vector_fp	m_ropr
	Reverse rate-of-progress for each reaction. More...

vector_fp	m_ropnet
	Net rate-of-progress for each reaction. More...

bool	m_skipUndeclaredSpecies

bool	m_skipUndeclaredThirdBodies

std::weak_ptr< Solution >	m_root
	reference to Solution More...

ValueCache	m_cache
	Cache for saved calculations within each Kinetics object. More...

Detailed Description

A kinetics manager for heterogeneous reaction mechanisms.

The reactions are assumed to occur at a 2D interface between two 3D phases.

There are some important additions to the behavior of the kinetics class due to the presence of multiple phases and a heterogeneous interface. If a reactant phase doesn't exists, i.e., has a mole number of zero, a heterogeneous reaction can not proceed from reactants to products. Note it could perhaps proceed from products to reactants if all of the product phases exist.

In order to make the determination of whether a phase exists or not actually involves the specification of additional information to the kinetics object., which heretofore has only had access to intrinsic field information about the phases (i.e., temperature pressure, and mole fraction).

The extrinsic specification of whether a phase exists or not must be specified on top of the intrinsic calculation of the reaction rate. This class carries a set of booleans indicating whether a phase in the heterogeneous mechanism exists or not.

Additionally, the class carries a set of booleans around indicating whether a product phase is stable or not. If a phase is not thermodynamically stable, it may be the case that a particular reaction in a heterogeneous mechanism will create a product species in the unstable phase. However, other reactions in the mechanism will destruct that species. This may cause oscillations in the formation of the unstable phase from time step to time step within a ODE solver, in practice. In order to avoid this situation, a set of booleans is tracked which sets the stability of a phase. If a phase is deemed to be unstable, then species in that phase will not be allowed to be birthed by the kinetics operator. Nonexistent phases are deemed to be unstable by default, but this can be changed.

Definition at line 57 of file InterfaceKinetics.h.

Constructor & Destructor Documentation

◆ InterfaceKinetics()

InterfaceKinetics ( thermo_t * thermo = 0 )

Constructor.

Parameters

thermo The optional parameter may be used to initialize the object with one ThermoPhase object. HKM Note -> Since the interface kinetics object will probably require multiple ThermoPhase objects, this is probably not a good idea to have this parameter.

Definition at line 20 of file InterfaceKinetics.cpp.

References InterfaceKinetics::addPhase(), and Kinetics::thermo().

Member Function Documentation

◆ kineticsType()

virtual std::string kineticsType ( ) const

inlinevirtual

Identifies the Kinetics manager type.

Each class derived from Kinetics should override this method to return a meaningful identifier.

Reimplemented from Kinetics.

Reimplemented in EdgeKinetics.

Definition at line 72 of file InterfaceKinetics.h.

◆ setElectricPotential()

void setElectricPotential	(	int	n,
		doublereal	V
	)

Set the electric potential in the nth phase.

Parameters

n	phase Index in this kinetics object.
V	Electric potential (volts)

Definition at line 44 of file InterfaceKinetics.cpp.

◆ getEquilibriumConstants()

void getEquilibriumConstants ( doublereal * kc )

virtual

Equilibrium constant for all reactions including the voltage term.

Kc = exp(deltaG/RT)

where deltaG is the electrochemical potential difference between products minus reactants.

Reimplemented from Kinetics.

Definition at line 170 of file InterfaceKinetics.cpp.

References Kinetics::getReactionDelta(), InterfaceKinetics::m_mu0_Kc, Kinetics::nReactions(), Kinetics::reactionPhaseIndex(), ThermoPhase::RT(), Kinetics::thermo(), and InterfaceKinetics::updateMu0().

Referenced by InterfaceKinetics::getRevRateConstants().

◆ updateExchangeCurrentQuantities()

void updateExchangeCurrentQuantities ( )

values needed to convert from exchange current density to surface reaction rate.

Definition at line 181 of file InterfaceKinetics.cpp.

References Kinetics::getReactionDelta(), ThermoPhase::getStandardChemPotentials(), InterfaceKinetics::m_deltaG0, InterfaceKinetics::m_mu0, InterfaceKinetics::m_ProdStanConcReac, Kinetics::m_reactantStoich, InterfaceKinetics::m_StandardConc, Kinetics::m_start, Kinetics::nPhases(), Kinetics::nReactions(), Phase::nSpecies(), ThermoPhase::standardConcentration(), and Kinetics::thermo().

Referenced by InterfaceKinetics::convertExchangeCurrentDensityFormulation(), and InterfaceKinetics::updateMu0().

◆ getDeltaGibbs()

void getDeltaGibbs ( doublereal * deltaG )

virtual

Return the vector of values for the reaction Gibbs free energy change.

(virtual from Kinetics.h) These values depend upon the concentration of the solution.

units = J kmol-1

Parameters

deltaG Output vector of deltaG's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 401 of file InterfaceKinetics.cpp.

References Kinetics::getReactionDelta(), InterfaceKinetics::m_deltaG, InterfaceKinetics::m_mu, Kinetics::m_start, Kinetics::m_thermo, Kinetics::nPhases(), and Kinetics::nReactions().

◆ getDeltaElectrochemPotentials()

void getDeltaElectrochemPotentials ( doublereal * deltaM )

virtual

Return the vector of values for the reaction electrochemical free energy change.

These values depend upon the concentration of the solution and the voltage of the phases

units = J kmol-1

Parameters

deltaM Output vector of deltaM's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 418 of file InterfaceKinetics.cpp.

References ThermoPhase::getElectrochemPotentials(), Kinetics::getReactionDelta(), InterfaceKinetics::m_grt, Kinetics::m_start, Kinetics::nPhases(), and Kinetics::thermo().

◆ getDeltaEnthalpy()

void getDeltaEnthalpy ( doublereal * deltaH )

virtual

Return the vector of values for the reactions change in enthalpy.

These values depend upon the concentration of the solution.

units = J kmol-1

Parameters

deltaH Output vector of deltaH's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 429 of file InterfaceKinetics.cpp.

References ThermoPhase::getPartialMolarEnthalpies(), Kinetics::getReactionDelta(), InterfaceKinetics::m_grt, Kinetics::m_start, Kinetics::nPhases(), and Kinetics::thermo().

◆ getDeltaEntropy()

void getDeltaEntropy ( doublereal * deltaS )

virtual

Return the vector of values for the reactions change in entropy.

These values depend upon the concentration of the solution.

units = J kmol-1 Kelvin-1

Parameters

deltaS Output vector of deltaS's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 440 of file InterfaceKinetics.cpp.

References ThermoPhase::getPartialMolarEntropies(), Kinetics::getReactionDelta(), InterfaceKinetics::m_grt, Kinetics::m_start, Kinetics::nPhases(), and Kinetics::thermo().

◆ getDeltaSSGibbs()

void getDeltaSSGibbs ( doublereal * deltaG )

virtual

Return the vector of values for the reaction standard state Gibbs free energy change.

These values don't depend upon the concentration of the solution.

units = J kmol-1

Parameters

deltaG Output vector of ss deltaG's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 451 of file InterfaceKinetics.cpp.

References Kinetics::getReactionDelta(), ThermoPhase::getStandardChemPotentials(), InterfaceKinetics::m_mu0, Kinetics::m_start, Kinetics::nPhases(), and Kinetics::thermo().

◆ getDeltaSSEnthalpy()

void getDeltaSSEnthalpy ( doublereal * deltaH )

virtual

Return the vector of values for the change in the standard state enthalpies of reaction.

These values don't depend upon the concentration of the solution.

units = J kmol-1

Parameters

deltaH Output vector of ss deltaH's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 465 of file InterfaceKinetics.cpp.

References ThermoPhase::getEnthalpy_RT(), Kinetics::getReactionDelta(), InterfaceKinetics::m_grt, Kinetics::m_kk, Kinetics::m_start, Kinetics::nPhases(), Kinetics::reactionPhaseIndex(), ThermoPhase::RT(), and Kinetics::thermo().

◆ getDeltaSSEntropy()

void getDeltaSSEntropy ( doublereal * deltaS )

virtual

Return the vector of values for the change in the standard state entropies for each reaction.

These values don't depend upon the concentration of the solution.

units = J kmol-1 Kelvin-1

Parameters

deltaS Output vector of ss deltaS's for reactions Length: nReactions().

Reimplemented from Kinetics.

Definition at line 482 of file InterfaceKinetics.cpp.

References Cantera::GasConstant, ThermoPhase::getEntropy_R(), Kinetics::getReactionDelta(), InterfaceKinetics::m_grt, Kinetics::m_kk, Kinetics::m_start, Kinetics::nPhases(), and Kinetics::thermo().

◆ getActivityConcentrations()

void getActivityConcentrations ( doublereal *const conc )

virtual

Get the vector of activity concentrations used in the kinetics object.

Parameters

[out] conc Vector of activity concentrations. Length is equal to the number of species in the kinetics object

Reimplemented from Kinetics.

Definition at line 115 of file InterfaceKinetics.cpp.

References InterfaceKinetics::_update_rates_C(), and InterfaceKinetics::m_actConc.

◆ electrochem_beta()

doublereal electrochem_beta ( size_t irxn ) const

Return the charge transfer rxn Beta parameter for the ith reaction.

Returns the beta parameter for a charge transfer reaction. This parameter is not important for non-charge transfer reactions. Note, the parameter defaults to zero. However, a value of 0.5 should be supplied for every charge transfer reaction if no information is known, as a value of 0.5 pertains to a symmetric transition state. The value can vary between 0 to 1.

Parameters

irxn	Reaction number in the kinetics mechanism

Returns: Beta parameter. This defaults to zero, even for charge transfer reactions.

Definition at line 763 of file InterfaceKinetics.cpp.

References InterfaceKinetics::m_beta, and InterfaceKinetics::m_ctrxn.

◆ isReversible()

virtual bool isReversible ( size_t i )

inlinevirtual

True if reaction i has been declared to be reversible.

If isReversible(i) is false, then the reverse rate of progress for reaction i is always zero.

Parameters

i	reaction index

Reimplemented from Kinetics.

Definition at line 131 of file InterfaceKinetics.h.

References InterfaceKinetics::m_revindex.

◆ getFwdRateConstants()

void getFwdRateConstants ( doublereal * kfwd )

virtual

Return the forward rate constants.

The computed values include all temperature-dependent, pressure-dependent, and third body contributions. Length is the number of reactions. Units are a combination of kmol, m^3 and s, that depend on the rate expression for the reaction.

Parameters

kfwd	Output vector containing the forward reaction rate constants. Length: nReactions().

Reimplemented from Kinetics.

Definition at line 295 of file InterfaceKinetics.cpp.

References Kinetics::m_perturb, Kinetics::m_rfn, Kinetics::nReactions(), and InterfaceKinetics::updateROP().

Referenced by InterfaceKinetics::getRevRateConstants().

◆ getRevRateConstants()

void getRevRateConstants	(	doublereal *	krev,
		bool	doIrreversible = `false`
	)

virtual

Return the reverse rate constants.

The computed values include all temperature-dependent, pressure-dependent, and third body contributions. Length is the number of reactions. Units are a combination of kmol, m^3 and s, that depend on the rate expression for the reaction. Note, this routine will return rate constants for irreversible reactions if the default for doIrreversible is overridden.

Parameters

krev	Output vector of reverse rate constants
doIrreversible	boolean indicating whether irreversible reactions should be included.

Reimplemented from Kinetics.

Definition at line 304 of file InterfaceKinetics.cpp.

References InterfaceKinetics::getEquilibriumConstants(), InterfaceKinetics::getFwdRateConstants(), Kinetics::m_rkcn, Kinetics::m_ropnet, and Kinetics::nReactions().

◆ effectivePreExponentialFactor()

double effectivePreExponentialFactor ( size_t irxn )

inline

Return effective preexponent for the specified reaction.

Returns effective preexponent, accounting for surface coverage dependencies.

Parameters

irxn	Reaction number in the kinetics mechanism

Returns: Effective preexponent

Definition at line 152 of file InterfaceKinetics.h.

References InterfaceKinetics::m_rates.

◆ effectiveActivationEnergy_R()

double effectiveActivationEnergy_R ( size_t irxn )

inline

Return effective activation energy for the specified reaction.

Returns effective activation energy, accounting for surface coverage dependencies.

Parameters

irxn	Reaction number in the kinetics mechanism

Returns: Effective activation energy divided by the gas constant

Definition at line 164 of file InterfaceKinetics.h.

References InterfaceKinetics::m_rates.

◆ effectiveTemperatureExponent()

double effectiveTemperatureExponent ( size_t irxn )

inline

Return effective temperature exponent for the specified reaction.

Returns effective temperature exponent, accounting for surface coverage dependencies. Current parameterization in SurfaceArrhenius does not change this parameter with the change in surface coverages.

Parameters

irxn	Reaction number in the kinetics mechanism

Returns: Effective temperature exponent

Definition at line 177 of file InterfaceKinetics.h.

References InterfaceKinetics::m_rates.

◆ addPhase()

void addPhase ( thermo_t & thermo )

virtual

Add a phase to the kinetics manager object.

This must be done before the function init() is called or before any reactions are input.

This function calls Kinetics::addPhase(). It also sets the following fields:

   m_phaseExists[]

Parameters

thermo Reference to the ThermoPhase to be added.

Reimplemented from Kinetics.

Definition at line 720 of file InterfaceKinetics.cpp.

References Kinetics::addPhase(), InterfaceKinetics::m_phaseExists, InterfaceKinetics::m_phaseIsStable, and Kinetics::thermo().

Referenced by InterfaceKinetics::InterfaceKinetics().

◆ init()

void init ( )

virtual

Prepare the class for the addition of reactions, after all phases have been added.

This method is called automatically when the first reaction is added. It needs to be called directly only in the degenerate case where there are no reactions. The base class method does nothing, but derived classes may use this to perform any initialization (allocating arrays, etc.) that requires knowing the phases.

Reimplemented from Kinetics.

Definition at line 727 of file InterfaceKinetics.cpp.

References InterfaceKinetics::m_nDim, InterfaceKinetics::m_surf, Phase::nDim(), Cantera::npos, Kinetics::reactionPhaseIndex(), and Kinetics::thermo().

Referenced by InterfaceKinetics::addReaction().

◆ resizeSpecies()

void resizeSpecies ( )

virtual

Resize arrays with sizes that depend on the total number of species.

Automatically called before adding each Reaction and Phase.

Reimplemented from Kinetics.

Definition at line 744 of file InterfaceKinetics.cpp.

References InterfaceKinetics::m_actConc, InterfaceKinetics::m_conc, InterfaceKinetics::m_grt, Kinetics::m_kk, InterfaceKinetics::m_mu, InterfaceKinetics::m_mu0, InterfaceKinetics::m_mu0_Kc, InterfaceKinetics::m_phi, InterfaceKinetics::m_pot, InterfaceKinetics::m_StandardConc, Kinetics::nPhases(), Kinetics::nReactions(), and Kinetics::resizeSpecies().

◆ addReaction()

bool addReaction ( shared_ptr< Reaction > r )

virtual

Add a single reaction to the mechanism.

Derived classes should call the base class method in addition to handling their own specialized behavior.

Parameters

r	Pointer to the Reaction object to be added.

Returns: true if the reaction is added or false if it was skipped

Reimplemented from Kinetics.

Definition at line 498 of file InterfaceKinetics.cpp.

◆ modifyReaction()

void modifyReaction	(	size_t	i,
		shared_ptr< Reaction >	rNew
	)

virtual

Modify the rate expression associated with a reaction.

The stoichiometric equation, type of the reaction, reaction orders, third body efficiencies, reversibility, etc. must be unchanged.

Parameters

i	Index of the reaction to be modified
rNew	Reaction with the new rate expressions

Reimplemented from Kinetics.

Definition at line 608 of file InterfaceKinetics.cpp.

References InterfaceKinetics::buildSurfaceArrhenius(), InterfaceKinetics::m_rates, InterfaceKinetics::m_temp, and Kinetics::modifyReaction().

◆ updateROP()

void updateROP ( )

virtual

Internal routine that updates the Rates of Progress of the reactions.

This is actually the guts of the functionality of the object

Reimplemented from Kinetics.

Definition at line 319 of file InterfaceKinetics.cpp.

Referenced by InterfaceKinetics::getFwdRateConstants().

◆ _update_rates_T()

void _update_rates_T ( )

Update properties that depend on temperature.

Current objects that this function updates: m_kdata->m_logtemp m_kdata->m_rfn m_rates. updateKc();

Definition at line 50 of file InterfaceKinetics.cpp.

References InterfaceKinetics::_update_rates_phi(), SurfPhase::getCoverages(), InterfaceKinetics::m_actConc, InterfaceKinetics::m_has_coverage_dependence, InterfaceKinetics::m_rates, and InterfaceKinetics::m_surf.

Referenced by InterfaceKinetics::updateROP().

◆ _update_rates_phi()

void _update_rates_phi ( )

Update properties that depend on the electric potential.

Definition at line 85 of file InterfaceKinetics.cpp.

References ThermoPhase::electricPotential(), InterfaceKinetics::m_phi, Kinetics::nPhases(), and Kinetics::thermo().

Referenced by InterfaceKinetics::_update_rates_T(), and InterfaceKinetics::updateMu0().

◆ _update_rates_C()

void _update_rates_C ( )

Update properties that depend on the species mole fractions and/or concentration,.

This method fills out the array of generalized concentrations by calling method getActivityConcentrations for each phase, which classes representing phases should overload to return the appropriate quantities.

Definition at line 96 of file InterfaceKinetics.cpp.

References ThermoPhase::getActivityConcentrations(), Phase::getConcentrations(), InterfaceKinetics::m_actConc, InterfaceKinetics::m_conc, Kinetics::m_start, Kinetics::m_thermo, and Kinetics::nPhases().

Referenced by InterfaceKinetics::getActivityConcentrations(), and InterfaceKinetics::updateROP().

◆ advanceCoverages()

void advanceCoverages	(	doublereal	tstep,
		double	rtol = `1.e-7`,
		double	atol = `1.e-14`,
		double	maxStepSize = `0`,
		size_t	maxSteps = `20000`,
		size_t	maxErrTestFails = `7`
	)

Advance the surface coverages in time.

This method carries out a time-accurate advancement of the surface coverages for a specified amount of time.

\[ \dot {\theta}_k = \dot s_k (\sigma_k / s_0) \]

Parameters

tstep	Time value to advance the surface coverages
rtol	The relative tolerance for the integrator
atol	The absolute tolerance for the integrator
maxStepSize	The maximum step-size the integrator is allowed to take. If zero, this option is disabled.
maxSteps	The maximum number of time-steps the integrator can take. If not supplied, uses the default value in CVodeIntegrator (20000).
maxErrTestFails	the maximum permissible number of error test failures If not supplied, uses the default value in CVODES (7).

Definition at line 773 of file InterfaceKinetics.cpp.

References ImplicitSurfChem::integrate(), InterfaceKinetics::m_integrator, ImplicitSurfChem::setMaxErrTestFails(), ImplicitSurfChem::setMaxSteps(), ImplicitSurfChem::setMaxStepSize(), and ImplicitSurfChem::setTolerances().

◆ solvePseudoSteadyStateProblem()

void solvePseudoSteadyStateProblem	(	int	ifuncOverride = `-1`,
		doublereal	timeScaleOverride = `1.0`
	)

Solve for the pseudo steady-state of the surface problem.

This is the same thing as the advanceCoverages() function, but at infinite times.

Note, a direct solve is carried out under the hood here, to reduce the computational time.

Parameters

ifuncOverride	One of the values defined in Surface Problem Solver Methods. The default is -1, which means that the program will decide.
timeScaleOverride	When a pseudo transient is selected this value can be used to override the default time scale for integration which is one. When SFLUX_TRANSIENT is used, this is equal to the time over which the equations are integrated. When SFLUX_INITIALIZE is used, this is equal to the time used in the initial transient algorithm, before the equation system is solved directly.

Definition at line 790 of file InterfaceKinetics.cpp.

References ImplicitSurfChem::initialize(), InterfaceKinetics::m_integrator, and ImplicitSurfChem::solvePseudoSteadyStateProblem().

◆ updateMu0()

void updateMu0 ( )

virtual

Update the standard state chemical potentials and species equilibrium constant entries.

Virtual because it is overridden when dealing with experimental open circuit voltage overrides

Definition at line 152 of file InterfaceKinetics.cpp.

References InterfaceKinetics::_update_rates_phi(), Phase::charge(), Cantera::Faraday, ThermoPhase::getStandardChemPotentials(), ThermoPhase::logStandardConc(), InterfaceKinetics::m_mu0, InterfaceKinetics::m_mu0_Kc, InterfaceKinetics::m_phi, Kinetics::m_start, Kinetics::nPhases(), Phase::nSpecies(), Kinetics::reactionPhaseIndex(), ThermoPhase::RT(), Kinetics::thermo(), and InterfaceKinetics::updateExchangeCurrentQuantities().

Referenced by InterfaceKinetics::getEquilibriumConstants(), and InterfaceKinetics::updateKc().

◆ updateKc()

void updateKc ( )

Update the equilibrium constants and stored electrochemical potentials in molar units for all reversible reactions and for all species.

Irreversible reactions have their equilibrium constant set to zero. For reactions involving charged species the equilibrium constant is adjusted according to the electrostatic potential.

Definition at line 121 of file InterfaceKinetics.cpp.

References Kinetics::getRevReactionDelta(), InterfaceKinetics::m_irrev, InterfaceKinetics::m_mu0_Kc, InterfaceKinetics::m_revindex, Kinetics::m_rkcn, Cantera::npos, Kinetics::nReactions(), Kinetics::reactionPhaseIndex(), ThermoPhase::RT(), Kinetics::thermo(), and InterfaceKinetics::updateMu0().

◆ applyVoltageKfwdCorrection()

void applyVoltageKfwdCorrection ( doublereal *const kfwd )

Apply modifications for the forward reaction rate for interfacial charge transfer reactions.

For reactions that transfer charge across a potential difference, the activation energies are modified by the potential difference. (see, for example, ...). This method applies this correction.

Parameters

kfwd	Vector of forward reaction rate constants on which to have the voltage correction applied

Definition at line 213 of file InterfaceKinetics.cpp.

References Phase::charge(), InterfaceKinetics::deltaElectricEnergy_, Cantera::Faraday, Kinetics::getReactionDelta(), InterfaceKinetics::m_beta, InterfaceKinetics::m_ctrxn, InterfaceKinetics::m_ctrxn_BVform, InterfaceKinetics::m_phi, InterfaceKinetics::m_pot, Kinetics::nPhases(), Phase::nSpecies(), Kinetics::reactionPhaseIndex(), and Kinetics::thermo().

◆ convertExchangeCurrentDensityFormulation()

void convertExchangeCurrentDensityFormulation ( doublereal *const kfwd )

When an electrode reaction rate is optionally specified in terms of its exchange current density, adjust kfwd to the standard reaction rate constant form and units.

When the BV reaction types are used, keep the exchange current density form.

For a reaction rate constant that was given in units of Amps/m2 (exchange current density formulation with iECDFormulation == true), convert the rate to kmoles/m2/s.

For a reaction rate constant that was given in units of kmol/m2/sec when the reaction type is a Butler-Volmer form, convert it to exchange current density form (amps/m2).

Parameters

kfwd	Vector of forward reaction rate constants, given in either normal form or in exchange current density form.

Definition at line 250 of file InterfaceKinetics.cpp.

References Cantera::Faraday, InterfaceKinetics::m_beta, InterfaceKinetics::m_ctrxn, InterfaceKinetics::m_ctrxn_BVform, InterfaceKinetics::m_ctrxn_ecdf, InterfaceKinetics::m_deltaG0, InterfaceKinetics::m_ProdStanConcReac, Kinetics::reactionPhaseIndex(), Kinetics::thermo(), and InterfaceKinetics::updateExchangeCurrentQuantities().

◆ setPhaseExistence()

void setPhaseExistence	(	const size_t	iphase,
		const int	exists
	)

Set the existence of a phase in the reaction object.

Tell the kinetics object whether a phase in the object exists. This is actually an extrinsic specification that must be carried out on top of the intrinsic calculation of the reaction rate. The routine will also flip the IsStable boolean within the kinetics object as well.

Parameters

iphase	Index of the phase. This is the order within the internal thermo vector object
exists	Boolean indicating whether the phase exists or not

Definition at line 804 of file InterfaceKinetics.cpp.

References Kinetics::checkPhaseIndex(), InterfaceKinetics::m_phaseExists, InterfaceKinetics::m_phaseExistsCheck, and InterfaceKinetics::m_phaseIsStable.

◆ setPhaseStability()

void setPhaseStability	(	const size_t	iphase,
		const int	isStable
	)

Set the stability of a phase in the reaction object.

Tell the kinetics object whether a phase in the object is stable. Species in an unstable phase will not be allowed to have a positive rate of formation from this kinetics object. This is actually an extrinsic specification that must be carried out on top of the intrinsic calculation of the reaction rate.

While conceptually not needed since kinetics is consistent with thermo when taken as a whole, in practice it has found to be very useful to turn off the creation of phases which shouldn't be forming. Typically this can reduce the oscillations in phase formation and destruction which are observed.

Parameters

iphase	Index of the phase. This is the order within the internal thermo vector object
isStable	Flag indicating whether the phase is stable or not

Definition at line 835 of file InterfaceKinetics.cpp.

References Kinetics::checkPhaseIndex(), and InterfaceKinetics::m_phaseIsStable.

◆ phaseExistence()

int phaseExistence ( const size_t iphase ) const

Gets the phase existence int for the ith phase.

Parameters

iphase Phase Id

Returns: The int specifying whether the kinetics object thinks the phase exists or not. If it exists, then species in that phase can be a reactant in reactions.

Definition at line 823 of file InterfaceKinetics.cpp.

References Kinetics::checkPhaseIndex(), and InterfaceKinetics::m_phaseExists.

◆ phaseStability()

int phaseStability ( const size_t iphase ) const

Gets the phase stability int for the ith phase.

Parameters

iphase Phase Id

Returns: The int specifying whether the kinetics object thinks the phase is stable with nonzero mole numbers. If it stable, then the kinetics object will allow for rates of production of of species in that phase that are positive.

Definition at line 829 of file InterfaceKinetics.cpp.

References Kinetics::checkPhaseIndex(), and InterfaceKinetics::m_phaseIsStable.

◆ determineFwdOrdersBV()

void determineFwdOrdersBV	(	ElectrochemicalReaction &	r,
		vector_fp &	fwdFullorders
	)

virtual

Deprecated:: To be removed after Cantera 2.5.

Definition at line 845 of file InterfaceKinetics.cpp.

References ElectrochemicalReaction::beta, Kinetics::kineticsSpeciesIndex(), Kinetics::nTotalSpecies(), Reaction::orders, Reaction::products, and Reaction::reactants.

◆ buildSurfaceArrhenius()

SurfaceArrhenius buildSurfaceArrhenius	(	size_t	i,
		InterfaceReaction &	r,
		bool	replace
	)

protected

Build a SurfaceArrhenius object from a Reaction, taking into account the possible sticking coefficient form and coverage dependencies.

Parameters

i	Reaction number
r	Reaction object containing rate coefficient parameters
replace	True if replacing an existing reaction

Definition at line 620 of file InterfaceKinetics.cpp.

References Arrhenius::activationEnergy_R(), SurfaceArrhenius::addCoverageDependence(), InterfaceReaction::coverage_deps, Reaction::equation(), Cantera::GasConstant, Cantera::getValue(), InterfaceReaction::is_sticking_coefficient, Kinetics::kineticsSpeciesIndex(), InterfaceKinetics::m_stickingData, InterfaceKinetics::m_surf, Phase::molecularWeight(), Kinetics::multiplier(), Phase::nDim(), Kinetics::nPhases(), Cantera::npos, Reaction::orders, Cantera::Pi, Arrhenius::preExponentialFactor(), Reaction::reactants, Kinetics::reactionPhaseIndex(), SurfPhase::size(), Phase::speciesIndex(), Kinetics::speciesPhaseIndex(), ThermoPhase::standardConcentration(), InterfaceReaction::sticking_species, Arrhenius::temperatureExponent(), Kinetics::thermo(), and InterfaceReaction::use_motz_wise_correction.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::modifyReaction().

Member Data Documentation

◆ m_grt

vector_fp m_grt

protected

Temporary work vector of length m_kk.

Definition at line 391 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::getDeltaElectrochemPotentials(), InterfaceKinetics::getDeltaEnthalpy(), InterfaceKinetics::getDeltaEntropy(), InterfaceKinetics::getDeltaSSEnthalpy(), InterfaceKinetics::getDeltaSSEntropy(), and InterfaceKinetics::resizeSpecies().

◆ m_revindex

std::vector<size_t> m_revindex

protected

List of reactions numbers which are reversible reactions.

This is a vector of reaction numbers. Each reaction in the list is reversible. Length = number of reversible reactions

Definition at line 398 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), InterfaceKinetics::isReversible(), and InterfaceKinetics::updateKc().

◆ m_rates

Rate1<SurfaceArrhenius> m_rates

protected

Templated class containing the vector of reactions for this interface.

The templated class is described in RateCoeffMgr.h The class SurfaceArrhenius is described in RxnRates.h

Definition at line 405 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::_update_rates_T(), InterfaceKinetics::addReaction(), InterfaceKinetics::effectiveActivationEnergy_R(), InterfaceKinetics::effectivePreExponentialFactor(), InterfaceKinetics::effectiveTemperatureExponent(), and InterfaceKinetics::modifyReaction().

◆ m_irrev

std::vector<size_t> m_irrev

protected

Vector of irreversible reaction numbers.

vector containing the reaction numbers of irreversible reactions.

Definition at line 413 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::updateKc().

◆ m_conc

vector_fp m_conc

protected

Array of concentrations for each species in the kinetics mechanism.

An array of generalized concentrations \( C_k \) that are defined such that \( a_k = C_k / C^0_k, \) where \( C^0_k \) is a standard concentration/ These generalized concentrations are used by this kinetics manager class to compute the forward and reverse rates of elementary reactions. The "units" for the concentrations of each phase depend upon the implementation of kinetics within that phase. The order of the species within the vector is based on the order of listed ThermoPhase objects in the class, and the order of the species within each ThermoPhase class.

Definition at line 427 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::_update_rates_C(), and InterfaceKinetics::resizeSpecies().

◆ m_actConc

vector_fp m_actConc

protected

Array of activity concentrations for each species in the kinetics object.

An array of activity concentrations \( Ca_k \) that are defined such that \( a_k = Ca_k / C^0_k, \) where \( C^0_k \) is a standard concentration. These activity concentrations are used by this kinetics manager class to compute the forward and reverse rates of elementary reactions. The "units" for the concentrations of each phase depend upon the implementation of kinetics within that phase. The order of the species within the vector is based on the order of listed ThermoPhase objects in the class, and the order of the species within each ThermoPhase class.

Definition at line 441 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::_update_rates_C(), InterfaceKinetics::_update_rates_T(), InterfaceKinetics::getActivityConcentrations(), InterfaceKinetics::resizeSpecies(), and InterfaceKinetics::updateROP().

◆ m_mu0

vector_fp m_mu0

protected

Vector of standard state chemical potentials for all species.

This vector contains a temporary vector of standard state chemical potentials for all of the species in the kinetics object

Length = m_kk. Units = J/kmol.

Definition at line 450 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::getDeltaSSGibbs(), InterfaceKinetics::resizeSpecies(), InterfaceKinetics::updateExchangeCurrentQuantities(), and InterfaceKinetics::updateMu0().

◆ m_mu

vector_fp m_mu

protected

Vector of chemical potentials for all species.

This vector contains a vector of chemical potentials for all of the species in the kinetics object

Length = m_kk. Units = J/kmol.

Definition at line 459 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::getDeltaGibbs(), and InterfaceKinetics::resizeSpecies().

◆ m_mu0_Kc

vector_fp m_mu0_Kc

protected

Vector of standard state electrochemical potentials modified by a standard concentration term.

This vector contains a temporary vector of standard state electrochemical potentials + RTln(Cs) for all of the species in the kinetics object

In order to get the units correct for the concentration equilibrium constant, each species needs to have an RT ln(Cs) added to its contribution to the equilibrium constant Cs is the standard concentration for the species. Frequently, for solid species, Cs is equal to 1. However, for gases Cs is P/RT. Length = m_kk. Units = J/kmol.

Definition at line 473 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::getEquilibriumConstants(), InterfaceKinetics::resizeSpecies(), InterfaceKinetics::updateKc(), and InterfaceKinetics::updateMu0().

◆ m_phi

vector_fp m_phi

protected

Vector of phase electric potentials.

Temporary vector containing the potential of each phase in the kinetics object. length = number of phases. Units = Volts.

Definition at line 480 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::_update_rates_phi(), InterfaceKinetics::applyVoltageKfwdCorrection(), InterfaceKinetics::resizeSpecies(), and InterfaceKinetics::updateMu0().

◆ m_pot

vector_fp m_pot

protected

Vector of potential energies due to Voltages.

Length is the number of species in kinetics mech. It's used to store the potential energy due to the voltage.

Definition at line 487 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::applyVoltageKfwdCorrection(), and InterfaceKinetics::resizeSpecies().

◆ deltaElectricEnergy_

vector_fp deltaElectricEnergy_

protected

Storage for the net electric energy change due to reaction.

Length is number of reactions. It's used to store the net electric potential energy change due to the reaction.

deltaElectricEnergy_[jrxn] = sum_i ( F V_i z_i nu_ij)

Definition at line 496 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::applyVoltageKfwdCorrection().

◆ m_surf

SurfPhase* m_surf

protected

Pointer to the single surface phase.

Definition at line 499 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::_update_rates_T(), InterfaceKinetics::addReaction(), InterfaceKinetics::buildSurfaceArrhenius(), and InterfaceKinetics::init().

◆ m_integrator

ImplicitSurfChem* m_integrator

protected

Pointer to the Implicit surface chemistry object.

Note this object is owned by this InterfaceKinetics object. It may only be used to solve this single InterfaceKinetics object's surface problem uncoupled from other surface phases.

Definition at line 507 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::advanceCoverages(), and InterfaceKinetics::solvePseudoSteadyStateProblem().

◆ m_beta

vector_fp m_beta

protected

Electrochemical transfer coefficient for the forward direction.

Electrochemical transfer coefficient for all reactions that have transfer reactions the reaction is given by m_ctrxn[i]

Definition at line 514 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), InterfaceKinetics::applyVoltageKfwdCorrection(), InterfaceKinetics::convertExchangeCurrentDensityFormulation(), and InterfaceKinetics::electrochem_beta().

◆ m_ctrxn

std::vector<size_t> m_ctrxn

protected

Vector of reaction indexes specifying the id of the charge transfer reactions in the mechanism.

Vector of reaction indices which involve charge transfers. This provides an index into the m_beta and m_ctrxn_BVform array.

  irxn = m_ctrxn[i]

Definition at line 524 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), InterfaceKinetics::applyVoltageKfwdCorrection(), InterfaceKinetics::convertExchangeCurrentDensityFormulation(), and InterfaceKinetics::electrochem_beta().

◆ m_ctrxn_BVform

std::vector<size_t> m_ctrxn_BVform

protected

Vector of Reactions which follow the Butler-Volmer methodology for specifying the exchange current density first.

Then, the other forms are specified based on this form.

Length is equal to the number of reactions with charge transfer coefficients, m_ctrxn[]

m_ctrxn_BVform[i] = 0; This means that the irxn reaction is calculated via the standard forward and reverse reaction rates m_ctrxn_BVform[i] = 1; This means that the irxn reaction is calculated via the BV format directly. m_ctrxn_BVform[i] = 2; this means that the irxn reaction is calculated via the BV format directly, using concentrations instead of activity concentrations.

Deprecated:: To be removed after Cantera 2.5.

Definition at line 539 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), InterfaceKinetics::applyVoltageKfwdCorrection(), and InterfaceKinetics::convertExchangeCurrentDensityFormulation().

◆ m_ctrxn_ecdf

vector_int m_ctrxn_ecdf

protected

Vector of booleans indicating whether the charge transfer reaction rate constant is described by an exchange current density rate constant expression.

Length is equal to the number of reactions with charge transfer coefficients, m_ctrxn[]

m_ctrxn_ecdf[irxn] = 0 This means that the rate coefficient calculator will calculate the rate constant as a chemical forward rate constant, a standard format. m_ctrxn_ecdf[irxn] = 1 this means that the rate coefficient calculator will calculate the rate constant as an exchange current density rate constant expression.

Definition at line 551 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::convertExchangeCurrentDensityFormulation().

◆ m_StandardConc

vector_fp m_StandardConc

protected

Vector of standard concentrations.

Length number of kinetic species units depend on the definition of the standard concentration within each phase

Definition at line 558 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::resizeSpecies(), and InterfaceKinetics::updateExchangeCurrentQuantities().

◆ m_deltaG0

vector_fp m_deltaG0

protected

Vector of delta G^0, the standard state Gibbs free energies for each reaction.

Length is the number of reactions units are Joule kmol-1

Definition at line 565 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), InterfaceKinetics::convertExchangeCurrentDensityFormulation(), and InterfaceKinetics::updateExchangeCurrentQuantities().

◆ m_deltaG

vector_fp m_deltaG

protected

Vector of deltaG[] of reaction, the delta Gibbs free energies for each reaction.

Length is the number of reactions units are Joule kmol-1

Definition at line 572 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::getDeltaGibbs().

◆ m_ProdStanConcReac

vector_fp m_ProdStanConcReac

protected

Vector of the products of the standard concentrations of the reactants.

Units vary wrt what the units of the standard concentrations are Length = number of reactions.

Definition at line 579 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), InterfaceKinetics::convertExchangeCurrentDensityFormulation(), and InterfaceKinetics::updateExchangeCurrentQuantities().

◆ m_temp

doublereal m_temp

protected

Current temperature of the data.

Definition at line 584 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::modifyReaction().

◆ m_logtemp

doublereal m_logtemp

protected

Current log of the temperature.

Definition at line 587 of file InterfaceKinetics.h.

◆ m_has_coverage_dependence

bool m_has_coverage_dependence

protected

Boolean flag indicating whether any reaction in the mechanism has a coverage dependent forward reaction rate.

If this is true, then the coverage dependence is multiplied into the forward reaction rates constant

Definition at line 595 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::_update_rates_T(), and InterfaceKinetics::addReaction().

◆ m_has_electrochem_rxns

bool m_has_electrochem_rxns

protected

Boolean flag indicating whether any reaction in the mechanism has a beta electrochemical parameter.

If this is true, the Butler-Volmer correction is applied to the forward reaction rate for those reactions.

fac = exp ( - beta * (delta_phi))

Definition at line 605 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction().

◆ m_has_exchange_current_density_formulation

bool m_has_exchange_current_density_formulation

protected

Boolean flag indicating whether any reaction in the mechanism is described by an exchange current density expression.

If this is true, the standard state Gibbs free energy of the reaction and the product of the reactant standard concentrations must be precalculated in order to calculate the rate constant.

Definition at line 614 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction().

◆ m_phaseExistsCheck

int m_phaseExistsCheck

protected

Int flag to indicate that some phases in the kinetics mechanism are non-existent.

We change the ROP vectors to make sure that non-existent phases are treated correctly in the kinetics operator. The value of this is equal to the number of phases which don't exist.

Definition at line 623 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::setPhaseExistence(), and InterfaceKinetics::updateROP().

◆ m_phaseExists

std::vector<bool> m_phaseExists

protected

Vector of booleans indicating whether phases exist or not.

Vector of booleans indicating whether a phase exists or not. We use this to set the ROP's so that unphysical things don't happen. For example, a reaction can't go in the forwards direction if a phase in which a reactant is present doesn't exist. Because InterfaceKinetics deals with intrinsic quantities only normally, nowhere else is this extrinsic concept introduced except here.

length = number of phases in the object. By default all phases exist.

Definition at line 636 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addPhase(), InterfaceKinetics::phaseExistence(), InterfaceKinetics::setPhaseExistence(), and InterfaceKinetics::updateROP().

◆ m_phaseIsStable

vector_int m_phaseIsStable

protected

Vector of int indicating whether phases are stable or not.

Vector of booleans indicating whether a phase is stable or not under the current conditions. We use this to set the ROP's so that unphysical things don't happen.

length = number of phases in the object. By default all phases are stable.

Definition at line 646 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addPhase(), InterfaceKinetics::phaseStability(), InterfaceKinetics::setPhaseExistence(), InterfaceKinetics::setPhaseStability(), and InterfaceKinetics::updateROP().

◆ m_rxnPhaseIsReactant

std::vector<std::vector<bool> > m_rxnPhaseIsReactant

protected

Vector of vector of booleans indicating whether a phase participates in a reaction as a reactant.

m_rxnPhaseIsReactant[j][p] indicates whether a species in phase p participates in reaction j as a reactant.

Definition at line 654 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::updateROP().

◆ m_rxnPhaseIsProduct

std::vector<std::vector<bool> > m_rxnPhaseIsProduct

protected

Vector of vector of booleans indicating whether a phase participates in a reaction as a product.

m_rxnPhaseIsReactant[j][p] indicates whether a species in phase p participates in reaction j as a product.

Definition at line 662 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::addReaction(), and InterfaceKinetics::updateROP().

◆ m_stickingData

std::vector<StickData> m_stickingData

protected

Data for sticking reactions.

Definition at line 673 of file InterfaceKinetics.h.

Referenced by InterfaceKinetics::buildSurfaceArrhenius().

◆ m_nDim

size_t m_nDim

protected

Number of dimensions of reacting phase (2 for InterfaceKinetics, 1 for EdgeKinetics)

Definition at line 681 of file InterfaceKinetics.h.

Referenced by EdgeKinetics::EdgeKinetics(), and InterfaceKinetics::init().

The documentation for this class was generated from the following files:

Classes

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ InterfaceKinetics()

Member Function Documentation

◆ kineticsType()

◆ setElectricPotential()

◆ getEquilibriumConstants()

◆ updateExchangeCurrentQuantities()

◆ getDeltaGibbs()

◆ getDeltaElectrochemPotentials()

◆ getDeltaEnthalpy()

◆ getDeltaEntropy()

◆ getDeltaSSGibbs()

◆ getDeltaSSEnthalpy()

◆ getDeltaSSEntropy()

◆ getActivityConcentrations()

◆ electrochem_beta()

◆ isReversible()

◆ getFwdRateConstants()

◆ getRevRateConstants()

◆ effectivePreExponentialFactor()

◆ effectiveActivationEnergy_R()

◆ effectiveTemperatureExponent()

◆ addPhase()

◆ init()

◆ resizeSpecies()

◆ addReaction()

◆ modifyReaction()

◆ updateROP()

◆ _update_rates_T()

◆ _update_rates_phi()

◆ _update_rates_C()

◆ advanceCoverages()

◆ solvePseudoSteadyStateProblem()

◆ updateMu0()

◆ updateKc()

◆ applyVoltageKfwdCorrection()

◆ convertExchangeCurrentDensityFormulation()

◆ setPhaseExistence()

◆ setPhaseStability()

◆ phaseExistence()

◆ phaseStability()

◆ determineFwdOrdersBV()

◆ buildSurfaceArrhenius()

Member Data Documentation

◆ m_grt

◆ m_revindex

◆ m_rates

◆ m_irrev

◆ m_conc

◆ m_actConc

◆ m_mu0

◆ m_mu

◆ m_mu0_Kc

◆ m_phi

◆ m_pot

◆ deltaElectricEnergy_

◆ m_surf

◆ m_integrator

◆ m_beta

◆ m_ctrxn

◆ m_ctrxn_BVform

◆ m_ctrxn_ecdf

◆ m_StandardConc

◆ m_deltaG0

◆ m_deltaG

◆ m_ProdStanConcReac

◆ m_temp

◆ m_logtemp

◆ m_has_coverage_dependence

◆ m_has_electrochem_rxns

◆ m_has_exchange_current_density_formulation

◆ m_phaseExistsCheck

◆ m_phaseExists

◆ m_phaseIsStable

◆ m_rxnPhaseIsReactant