|
| file | AdsorbateThermo.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on the expressions for the thermo properties of a species with several vibrational models.
|
| |
| file | ConstCpPoly.h [code] |
| | Headers for the SpeciesThermoInterpType object that employs a constant heat capacity assumption (see Species Reference-State Thermodynamic Properties and ConstCpPoly).
|
| |
| file | ConstDensityThermo.h [code] |
| | Header for a Thermo manager for incompressible ThermoPhases (see Thermodynamic Properties and ConstDensityThermo).
|
| |
| file | DebyeHuckel.h [code] |
| | Headers for the DebyeHuckel ThermoPhase object, which models dilute electrolyte solutions (see Thermodynamic Properties and DebyeHuckel ) .
|
| |
| file | EdgePhase.h [code] |
| | Declarations for the EdgePhase ThermoPhase object, which models the interface between two surfaces (see Thermodynamic Properties and EdgePhase).
|
| |
| file | electrolytes.h [code] |
| | Header file for a common definitions used in electrolytes thermodynamics.
|
| |
| file | Elements.h [code] |
| | Contains the getElementWeight function and the definitions of element constraint types.
|
| |
| file | FixedChemPotSSTP.h [code] |
| | Header file for the FixedChemPotSSTP class, which represents a fixed-composition incompressible substance with a constant chemical potential (see Thermodynamic Properties and class FixedChemPotSSTP)
|
| |
| file | GibbsExcessVPSSTP.h [code] |
| | Header for intermediate ThermoPhase object for phases which employ Gibbs excess free energy based formulations (see Thermodynamic Properties and class GibbsExcessVPSSTP).
|
| |
| file | HMWSoln.h [code] |
| | Headers for the HMWSoln ThermoPhase object, which models concentrated electrolyte solutions (see Thermodynamic Properties and HMWSoln ) .
|
| |
| file | IdealGasPhase.h [code] |
| | ThermoPhase object for the ideal gas equation of state - workhorse for Cantera (see Thermodynamic Properties and class IdealGasPhase).
|
| |
| file | IdealMolalSoln.h [code] |
| | ThermoPhase object for the ideal molal equation of state (see Thermodynamic Properties and class IdealMolalSoln).
|
| |
| file | IdealSolidSolnPhase.h [code] |
| | Header file for an ideal solid solution model with incompressible thermodynamics (see Thermodynamic Properties and IdealSolidSolnPhase).
|
| |
| file | IdealSolnGasVPSS.h [code] |
| | Definition file for a derived class of ThermoPhase that assumes either an ideal gas or ideal solution approximation and handles variable pressure standard state methods for calculating thermodynamic properties (see Thermodynamic Properties and class IdealSolnGasVPSS).
|
| |
| file | IonsFromNeutralVPSSTP.h [code] |
| | Header for intermediate ThermoPhase object for phases which consist of ions whose thermodynamics is calculated from neutral molecule thermodynamics.
|
| |
| file | LatticePhase.h [code] |
| | Header for a simple thermodynamics model of a bulk phase derived from ThermoPhase, assuming a lattice of solid atoms (see Thermodynamic Properties and class LatticePhase).
|
| |
| file | LatticeSolidPhase.h [code] |
| | Header for a simple thermodynamics model of a bulk solid phase derived from ThermoPhase, assuming an ideal solution model based on a lattice of solid atoms (see Thermodynamic Properties and class LatticeSolidPhase).
|
| |
| file | MargulesVPSSTP.h [code] |
| | (see Thermodynamic Properties and class MargulesVPSSTP).
|
| |
| file | MaskellSolidSolnPhase.h [code] |
| | Header file for a solid solution model following Maskell, Shaw, and Tye.
|
| |
| file | MetalPhase.h [code] |
| |
| file | MetalSHEelectrons.h [code] |
| | Header file for the MetalSHEElectrons class, which represents the electrons in a metal that are consistent with the SHE electrode (see Thermodynamic Properties and class MetalSHEelectrons)
|
| |
| file | MineralEQ3.h [code] |
| | Header file for the MineralEQ3 class, which represents a fixed-composition incompressible substance based on EQ3's parameterization (see Thermodynamic Properties and class MineralEQ3)
|
| |
| file | MixedSolventElectrolyte.h [code] |
| | (see Thermodynamic Properties and class MixedSolventElectrolyte ).
|
| |
| file | MixtureFugacityTP.h [code] |
| | Header file for a derived class of ThermoPhase that handles non-ideal mixtures based on the fugacity models (see Thermodynamic Properties and class MixtureFugacityTP).
|
| |
| file | MolalityVPSSTP.h [code] |
| | Header for intermediate ThermoPhase object for phases which employ molality based activity coefficient formulations (see Thermodynamic Properties and class MolalityVPSSTP).
|
| |
| file | MolarityIonicVPSSTP.h [code] |
| | (see Thermodynamic Properties and class MolarityIonicVPSSTP).
|
| |
| file | Mu0Poly.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on a piecewise constant mu0 interpolation (see Species Reference-State Thermodynamic Properties and class Mu0Poly).
|
| |
| file | MultiSpeciesThermo.h [code] |
| | Header for a general species thermodynamic property manager for a phase (see MultiSpeciesThermo).
|
| |
| file | Nasa9Poly1.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA 9 coefficient temperature polynomial form applied to one temperature region (see Species Reference-State Thermodynamic Properties and class Nasa9Poly1).
|
| |
| file | Nasa9PolyMultiTempRegion.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA 9 coefficient temperature polynomial form applied to multiple temperature regions (see Species Reference-State Thermodynamic Properties and class Nasa9PolyMultiTempRegion).
|
| |
| file | NasaPoly1.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA temperature polynomial form applied to one temperature region (see Species Reference-State Thermodynamic Properties and class NasaPoly1).
|
| |
| file | NasaPoly2.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on the NASA temperature polynomial form applied to two temperature regions (see Species Reference-State Thermodynamic Properties and class NasaPoly2).
|
| |
| file | PDSS.h [code] |
| | Declarations for the virtual base class PDSS (pressure dependent standard state) which handles calculations for a single species in a phase (see Species Standard-State Thermodynamic Properties and class PDSS).
|
| |
| file | PDSS_ConstVol.h [code] |
| | Declarations for the class PDSS_ConstVol (pressure dependent standard state) which handles calculations for a single species with a constant molar volume in a phase (see class Species Standard-State Thermodynamic Properties and PDSS_ConstVol).
|
| |
| file | PDSS_HKFT.h [code] |
| | Declarations for the class PDSS_HKFT (pressure dependent standard state) which handles calculations for a single species in a phase using the HKFT standard state (see Species Standard-State Thermodynamic Properties and class PDSS_HKFT).
|
| |
| file | PDSS_IdealGas.h [code] |
| | Declarations for the class PDSS_IdealGas (pressure dependent standard state) which handles calculations for a single ideal gas species in a phase (see Species Standard-State Thermodynamic Properties and class PDSS_IdealGas).
|
| |
| file | PDSS_IonsFromNeutral.h [code] |
| | Declarations for the class PDSS_IonsFromNeutral ( which handles calculations for a single ion in a fluid, whose properties are calculated from another neutral molecule.
|
| |
| file | PDSS_SSVol.h [code] |
| | Declarations for the class PDSS_SSVol (pressure dependent standard state) which handles calculations for a single species with an expression for the standard state molar volume in a phase given by an enumerated data type (see class Species Standard-State Thermodynamic Properties and PDSS_SSVol).
|
| |
| file | PDSS_Water.h [code] |
| | Implementation of a pressure dependent standard state virtual function for a Pure Water Phase (see Species Standard-State Thermodynamic Properties and class PDSS_Water).
|
| |
| file | PDSSFactory.h [code] |
| |
| file | Phase.h [code] |
| | Header file for class Phase.
|
| |
| file | PhaseCombo_Interaction.h [code] |
| | Header for intermediate ThermoPhase object for phases which employ the Margules Gibbs free energy formulation and eliminates the ideal mixing term.
|
| |
| file | PureFluidPhase.h [code] |
| | Header for a ThermoPhase class for a pure fluid phase consisting of gas, liquid, mixed-gas-liquid and supercrit fluid (see Thermodynamic Properties and class PureFluidPhase).
|
| |
| file | RedlichKisterVPSSTP.h [code] |
| | (see Thermodynamic Properties and class RedlichKisterVPSSTP).
|
| |
| file | RedlichKwongMFTP.h [code] |
| |
| file | ShomatePoly.h [code] |
| | Header for a single-species standard state object derived from SpeciesThermoInterpType based on the Shomate temperature polynomial form applied to one temperature region (see Species Reference-State Thermodynamic Properties and class ShomatePoly and ShomatePoly2).
|
| |
| file | SingleSpeciesTP.h [code] |
| | Header for the SingleSpeciesTP class, which is a filter class for ThermoPhase, that eases the construction of single species phases ( see Thermodynamic Properties and class SingleSpeciesTP).
|
| |
| file | Species.h [code] |
| | Declaration for class Cantera::Species.
|
| |
| file | SpeciesThermoFactory.h [code] |
| | Header for factory functions to build instances of classes that manage the standard-state thermodynamic properties of a set of species (see Species Reference-State Thermodynamic Properties);.
|
| |
| file | SpeciesThermoInterpType.h [code] |
| | Pure Virtual Base class for individual species reference state thermodynamic managers and text for the spthermo module (see Species Reference-State Thermodynamic Properties and class SpeciesThermoInterpType ).
|
| |
| file | speciesThermoTypes.h [code] |
| | Contains const definitions for types of species reference-state thermodynamics managers (see Species Reference-State Thermodynamic Properties)
|
| |
| file | StoichSubstance.h [code] |
| | Header file for the StoichSubstance class, which represents a fixed-composition incompressible substance (see Thermodynamic Properties and class StoichSubstance)
|
| |
| file | SurfPhase.h [code] |
| | Header for a simple thermodynamics model of a surface phase derived from ThermoPhase, assuming an ideal solution model (see Thermodynamic Properties and class SurfPhase).
|
| |
| file | ThermoFactory.h [code] |
| | Headers for the factory class that can create known ThermoPhase objects (see Thermodynamic Properties and class ThermoFactory).
|
| |
| file | ThermoPhase.h [code] |
| | Header file for class ThermoPhase, the base class for phases with thermodynamic properties, and the text for the Module thermoprops (see Thermodynamic Properties and class ThermoPhase).
|
| |
| file | VPStandardStateTP.h [code] |
| | Header file for a derived class of ThermoPhase that handles variable pressure standard state methods for calculating thermodynamic properties (see Thermodynamic Properties and class VPStandardStateTP).
|
| |
| file | WaterProps.h [code] |
| | Header for a class used to house several approximation routines for properties of water.
|
| |
| file | WaterPropsIAPWS.h [code] |
| | Headers for a class for calculating the equation of state of water from the IAPWS 1995 Formulation based on the steam tables thermodynamic basis (See class WaterPropsIAPWS).
|
| |
| file | WaterPropsIAPWSphi.h [code] |
| | Header for Lowest level of the classes which support a real water model (see class WaterPropsIAPWS and class WaterPropsIAPWSphi).
|
| |
| |
