Cantera
2.4.0
|
Represents a wall between between two ReactorBase objects. More...
#include <Wall.h>
Public Member Functions | |
Wall (const Wall &)=delete | |
Wall & | operator= (const Wall &)=delete |
virtual doublereal | vdot (doublereal t) |
Rate of volume change (m^3/s) for the adjacent reactors. More... | |
virtual doublereal | Q (doublereal t) |
Heat flow rate through the wall (W). More... | |
doublereal | area () |
Area in m^2. More... | |
void | setArea (doublereal a) |
Set the area [m^2]. More... | |
double | getArea () const |
Get the area [m^2]. More... | |
void | setThermalResistance (doublereal Rth) |
void | setHeatTransferCoeff (doublereal U) |
Set the overall heat transfer coefficient [W/m^2/K]. More... | |
double | getHeatTransferCoeff () const |
Get the overall heat transfer coefficient [W/m^2/K]. More... | |
void | setEmissivity (doublereal epsilon) |
Set the emissivity. More... | |
double | getEmissivity () const |
void | setVelocity (Func1 *f=0) |
Set the wall velocity to a specified function of time. More... | |
void | setExpansionRateCoeff (doublereal k) |
Set the expansion rate coefficient. More... | |
double | getExpansionRateCoeff () const |
Get the expansion rate coefficient. More... | |
void | setHeatFlux (Func1 *q) |
Specify the heat flux function \( q_0(t) \). More... | |
bool | install (ReactorBase &leftReactor, ReactorBase &rightReactor) |
Install the wall between two reactors or reservoirs. More... | |
virtual void | initialize () |
Called just before the start of integration. More... | |
virtual bool | ready () |
True if the wall is correctly configured and ready to use. More... | |
ReactorBase & | left () const |
Return a reference to the Reactor or Reservoir to the left of the wall. More... | |
const ReactorBase & | right () |
Return a reference to the Reactor or Reservoir to the right of the wall. More... | |
Protected Attributes | |
ReactorBase * | m_left |
ReactorBase * | m_right |
std::vector< ReactorSurface > | m_surf |
doublereal | m_area |
doublereal | m_k |
doublereal | m_rrth |
doublereal | m_emiss |
Func1 * | m_vf |
Func1 * | m_qf |
Represents a wall between between two ReactorBase objects.
Walls can move (changing the volume of the adjacent reactors) and allow heat transfer between reactors.
|
virtual |
Rate of volume change (m^3/s) for the adjacent reactors.
The volume rate of change is given by
\[ \dot V = K A (P_{left} - P_{right}) + F(t) \]
where K is the specified expansion rate coefficient, A is the wall area, and F(t) is a specified function of time. Positive values for vdot
correspond to increases in the volume of reactor on left, and decreases in the volume of the reactor on the right.
Definition at line 36 of file Wall.cpp.
References Func1::eval(), and ReactorBase::pressure().
|
virtual |
Heat flow rate through the wall (W).
The heat flux is given by
\[ Q = h A (T_{left} - T_{right}) + A G(t) \]
where h is the heat transfer coefficient, A is the wall area, and G(t) is a specified function of time. Positive values denote a flux from left to right.
Definition at line 45 of file Wall.cpp.
References Func1::eval(), Cantera::StefanBoltz, and ReactorBase::temperature().
|
inline |
|
inline |
|
inline |
|
inline |
|
inline |
|
inline |
|
inline |
bool install | ( | ReactorBase & | leftReactor, |
ReactorBase & | rightReactor | ||
) |
Install the wall between two reactors or reservoirs.
Definition at line 21 of file Wall.cpp.
References ReactorBase::addWall().
|
inlinevirtual |
Called just before the start of integration.
Definition at line 129 of file Wall.h.
Referenced by Reactor::initialize().
|
inlinevirtual |
|
inline |
|
inline |