Transport Parameters for pure water. More...

#include <WaterTransport.h>

Inheritance diagram for WaterTransport:

Collaboration diagram for WaterTransport:

Public Member Functions
	WaterTransport (thermo_t *thermo=0, int ndim=1)
	default constructor More...

	WaterTransport (const WaterTransport &right)

WaterTransport &	operator= (const WaterTransport &right)

virtual Transport *	duplMyselfAsTransport () const
	Duplication routine for objects which inherit from Transport. More...

virtual int	model () const
	Transport model. More...

virtual doublereal	viscosity ()
	Returns the viscosity of water at the current conditions (kg/m/s) More...

virtual doublereal	bulkViscosity ()
	The bulk viscosity in Pa-s. More...

virtual doublereal	thermalConductivity ()
	Returns the thermal conductivity of water at the current conditions (W/m/K) More...

Public Member Functions inherited from Transport
	Transport (thermo_t *thermo=0, size_t ndim=1)
	Constructor. More...

	Transport (const Transport &right)

Transport &	operator= (const Transport &right)

thermo_t &	thermo ()

bool	ready ()

void	setNDim (const int ndim)
	Set the number of dimensions to be expected in flux expressions. More...

size_t	nDim () const
	Return the number of dimensions in flux expressions. More...

void	checkSpeciesIndex (size_t k) const
	Check that the specified species index is in range Throws an exception if k is greater than nSpecies() More...

void	checkSpeciesArraySize (size_t kk) const
	Check that an array size is at least nSpecies() Throws an exception if kk is less than nSpecies(). More...

virtual doublereal	getElectricConduct ()
	Compute the mixture electrical conductivity (S m-1) at the current conditions of the phase (Siemens m-1) More...

virtual void	getElectricCurrent (int ndim, const doublereal grad_T, int ldx, const doublereal grad_X, int ldf, const doublereal grad_V, doublereal current)
	Compute the electric current density in A/m^2. More...

virtual void	getSpeciesFluxes (size_t ndim, const doublereal const grad_T, size_t ldx, const doublereal const grad_X, size_t ldf, doublereal *const fluxes)
	Get the species diffusive mass fluxes wrt to the specified solution averaged velocity, given the gradients in mole fraction and temperature. More...

virtual void	getSpeciesFluxesES (size_t ndim, const doublereal grad_T, size_t ldx, const doublereal grad_X, size_t ldf, const doublereal grad_Phi, doublereal fluxes)
	Get the species diffusive mass fluxes wrt to the mass averaged velocity, given the gradients in mole fraction, temperature and electrostatic potential. More...

virtual void	getSpeciesVdiff (size_t ndim, const doublereal grad_T, int ldx, const doublereal grad_X, int ldf, doublereal *Vdiff)
	Get the species diffusive velocities wrt to the mass averaged velocity, given the gradients in mole fraction and temperature. More...

virtual void	getSpeciesVdiffES (size_t ndim, const doublereal grad_T, int ldx, const doublereal grad_X, int ldf, const doublereal grad_Phi, doublereal Vdiff)
	Get the species diffusive velocities wrt to the mass averaged velocity, given the gradients in mole fraction, temperature, and electrostatic potential. More...

virtual void	getMolarFluxes (const doublereal const state1, const doublereal const state2, const doublereal delta, doublereal *const cfluxes)
	Get the molar fluxes [kmol/m^2/s], given the thermodynamic state at two nearby points. More...

virtual void	getMassFluxes (const doublereal state1, const doublereal state2, doublereal delta, doublereal *mfluxes)
	Get the mass fluxes [kg/m^2/s], given the thermodynamic state at two nearby points. More...

virtual void	getThermalDiffCoeffs (doublereal *const dt)
	Return a vector of Thermal diffusion coefficients [kg/m/sec]. More...

virtual void	getBinaryDiffCoeffs (const size_t ld, doublereal *const d)
	Returns the matrix of binary diffusion coefficients [m^2/s]. More...

virtual void	getMultiDiffCoeffs (const size_t ld, doublereal *const d)
	Return the Multicomponent diffusion coefficients. Units: [m^2/s]. More...

virtual void	getMixDiffCoeffs (doublereal *const d)
	Returns a vector of mixture averaged diffusion coefficients. More...

virtual void	getMixDiffCoeffsMole (doublereal *const d)
	Returns a vector of mixture averaged diffusion coefficients. More...

virtual void	getMixDiffCoeffsMass (doublereal *const d)
	Returns a vector of mixture averaged diffusion coefficients. More...

virtual void	setParameters (const int type, const int k, const doublereal *const p)
	Set model parameters for derived classes. More...

void	setVelocityBasis (VelocityBasis ivb)
	Sets the velocity basis. More...

VelocityBasis	getVelocityBasis () const
	Gets the velocity basis. More...

virtual void	getSpeciesViscosities (doublereal *const visc)
	Returns the pure species viscosities. More...

virtual doublereal	ionConductivity ()
	The ionic conductivity in 1/ohm/m. More...

virtual void	getSpeciesIonConductivity (doublereal *const ionCond)
	Returns the pure species ionic conductivity. More...

virtual void	mobilityRatio (double *mobRat)
	Returns the pointer to the mobility ratios of the species in the phase. More...

virtual void	getSpeciesMobilityRatio (double **mobRat)
	Returns the pure species limit of the mobility ratios. More...

virtual void	selfDiffusion (doublereal *const selfDiff)
	Returns the self diffusion coefficients of the species in the phase. More...

virtual void	getSpeciesSelfDiffusion (double **selfDiff)
	Returns the pure species self diffusion in solution of each species. More...

virtual doublereal	electricalConductivity ()

virtual void	getMobilities (doublereal *const mobil_e)
	Get the Electrical mobilities (m^2/V/s). More...

virtual void	getFluidMobilities (doublereal *const mobil_f)
	Get the fluid mobilities (s kmol/kg). More...

virtual bool	initSolid (SolidTransportData &tr)
	Called by TransportFactory to set parameters. More...

virtual void	setThermo (thermo_t &thermo)
	Specifies the ThermoPhase object. More...

Private Member Functions
void	initTP ()
	Routine to do some common initializations at the start of using this routine. More...

Private Attributes
WaterPropsIAPWS *	m_sub
	Pointer to the WaterPropsIAPWS object, which does the actual calculations for the real equation of state. More...

WaterProps *	m_waterProps
	Pointer to the WaterProps object. More...

PDSS_Water *	m_waterPDSS
	Pressure dependent standard state object for water. More...

Additional Inherited Members
Protected Member Functions inherited from Transport
virtual bool	initGas (GasTransportParams &tr)
	Called by TransportFactory to set parameters. More...

virtual bool	initLiquid (LiquidTransportParams &tr)
	Called by TransportFactory to set parameters. More...

void	finalize ()
	Enable the transport object for use. More...

Protected Attributes inherited from Transport
thermo_t *	m_thermo
	pointer to the object representing the phase More...

bool	m_ready
	true if finalize has been called More...

size_t	m_nsp
	Number of species. More...

size_t	m_nDim
	Number of dimensions used in flux expressions. More...

int	m_velocityBasis
	Velocity basis from which diffusion velocities are computed. More...

Detailed Description

Transport Parameters for pure water.

Definition at line 31 of file WaterTransport.h.

Constructor & Destructor Documentation

WaterTransport	(	thermo_t *	thermo = `0`,
		int	ndim = `1`
	)

default constructor

Parameters

thermo	ThermoPhase object that represents the phase. Defaults to zero
ndim	Number of dimensions of the flux expressions. Defaults to a value of one.

Definition at line 19 of file WaterTransport.cpp.

References WaterTransport::initTP().

Referenced by WaterTransport::duplMyselfAsTransport().

Member Function Documentation

Transport * duplMyselfAsTransport ( ) const

virtual

Duplication routine for objects which inherit from Transport.

This virtual routine can be used to duplicate objects derived from Transport even if the application only has a pointer to Transport to work with.

These routines are basically wrappers around the derived copy constructor.

Reimplemented from Transport.

Definition at line 45 of file WaterTransport.cpp.

References WaterTransport::WaterTransport().

virtual int model ( ) const

inlinevirtual

Transport model.

The transport model is the set of equations used to compute the transport properties. This method returns an integer flag that identifies the transport model implemented. The base class returns 0.

Reimplemented from Transport.

Definition at line 48 of file WaterTransport.h.

doublereal viscosity ( )

virtual

Returns the viscosity of water at the current conditions (kg/m/s)

This function calculates the value of the viscosity of pure water at the current T and P.

The formulas used are from the paper

J. V. Sengers, J. T. R. Watson, "Improved International Formulations for the Viscosity and Thermal Conductivity of Water Substance", J. Phys. Chem. Ref. Data, 15, 1291 (1986).

The formulation is accurate for all temperatures and pressures, for steam and for water, even near the critical point. Pressures above 500 MPa and temperature above 900 C are suspect.

Reimplemented from Transport.

Definition at line 83 of file WaterTransport.cpp.

References WaterTransport::m_waterProps, and WaterProps::viscosityWater().

virtual doublereal bulkViscosity ( )

inlinevirtual

The bulk viscosity in Pa-s.

The bulk viscosity is only non-zero in rare cases. Most transport managers either overload this method to return zero, or do not implement it, in which case an exception is thrown if called.

Reimplemented from Transport.

Definition at line 70 of file WaterTransport.h.

doublereal thermalConductivity ( )

virtual

Returns the thermal conductivity of water at the current conditions (W/m/K)

This function calculates the value of the thermal conductivity of water at the current T and P.

The formulas used are from the paper J. V. Sengers, J. T. R. Watson, "Improved International Formulations for the Viscosity and Thermal Conductivity of Water Substance", J. Phys. Chem. Ref. Data, 15, 1291 (1986).

The formulation is accurate for all temperatures and pressures, for steam and for water, even near the critical point. Pressures above 500 MPa and temperature above 900 C are suspect.

Reimplemented from Transport.

Definition at line 88 of file WaterTransport.cpp.

References WaterTransport::m_waterProps, and WaterProps::thermalConductivityWater().

void initTP ( )

private

Routine to do some common initializations at the start of using this routine.

Definition at line 50 of file WaterTransport.cpp.

References AssertTrace, PDSS_Water::getWater(), WaterSSTP::getWater(), PDSS_Water::getWaterProps(), WaterSSTP::getWaterProps(), WaterTransport::m_sub, Transport::m_thermo, WaterTransport::m_waterPDSS, and WaterTransport::m_waterProps.

Referenced by WaterTransport::WaterTransport().