A phase that is comprised of a fixed additive combination of other lattice phases. More...

#include <LatticeSolidPhase.h>

Inheritance diagram for LatticeSolidPhase:

Collaboration diagram for LatticeSolidPhase:

Public Member Functions
	LatticeSolidPhase ()
	Base empty constructor. More...

	LatticeSolidPhase (const LatticeSolidPhase &right)
	Copy Constructor. More...

LatticeSolidPhase &	operator= (const LatticeSolidPhase &right)
	Assignment operator. More...

virtual	~LatticeSolidPhase ()
	Destructor. More...

ThermoPhase *	duplMyselfAsThermoPhase () const
	Duplication function. More...

virtual int	eosType () const
	Equation of state type flag. More...

virtual doublereal	minTemp (size_t k=npos) const
	Minimum temperature for which the thermodynamic data for the species or phase are valid. More...

virtual doublereal	maxTemp (size_t k=npos) const
	Maximum temperature for which the thermodynamic data for the species are valid. More...

virtual doublereal	refPressure () const
	Returns the reference pressure in Pa. More...

virtual int	standardStateConvention () const
	This method returns the convention used in specification of the standard state, of which there are currently two, temperature based, and variable pressure based. More...

virtual doublereal	enthalpy_mole () const
	Return the Molar Enthalpy. Units: J/kmol. More...

virtual doublereal	intEnergy_mole () const
	Return the Molar Internal Energy. Units: J/kmol. More...

virtual doublereal	entropy_mole () const
	Return the Molar Entropy. Units: J/kmol/K. More...

virtual doublereal	gibbs_mole () const
	Return the Molar Gibbs energy. Units: J/kmol. More...

virtual doublereal	cp_mole () const
	Return the constant pressure heat capacity. Units: J/kmol/K. More...

virtual doublereal	cv_mole () const
	Return the constant volume heat capacity. Units: J/kmol/K. More...

virtual doublereal	pressure () const
	Report the Pressure. Units: Pa. More...

virtual void	setPressure (doublereal p)
	Set the pressure at constant temperature. Units: Pa. More...

doublereal	calcDensity ()
	Calculate the density of the solid mixture. More...

virtual void	setMoleFractions (const doublereal *const x)
	Set the mole fractions to the specified values, and then normalize them so that they sum to 1.0 for each of the subphases. More...

virtual void	getMoleFractions (doublereal *const x) const
	Get the species mole fraction vector. More...

doublereal	moleFraction (const int k) const
	The mole fraction of species k. More...

void	getMassFractions (doublereal *const y) const
	Get the species mass fractions. More...

doublereal	massFraction (const int k) const
	Mass fraction of species k. More...

virtual void	setMassFractions (const doublereal *const y)
	Set the mass fractions to the specified values, and then normalize them so that they sum to 1.0. More...

virtual void	setMassFractions_NoNorm (const doublereal *const y)
	Set the mass fractions to the specified values without normalizing. More...

void	getConcentrations (doublereal *const c) const

doublereal	concentration (int k) const

virtual void	setConcentrations (const doublereal *const conc)
	Set the concentrations to the specified values within the phase. More...

virtual void	getActivityConcentrations (doublereal *c) const
	This method returns an array of generalized activity concentrations. More...

virtual void	getActivityCoefficients (doublereal *ac) const
	Get the array of non-dimensional molar-based activity coefficients at the current solution temperature, pressure, and solution concentration. More...

virtual void	getChemPotentials (doublereal *mu) const
	Get the species chemical potentials. Units: J/kmol. More...

virtual void	getPartialMolarEnthalpies (doublereal *hbar) const
	Returns an array of partial molar enthalpies for the species in the mixture. More...

virtual void	getPartialMolarEntropies (doublereal *sbar) const
	Returns an array of partial molar entropies of the species in the solution. More...

virtual void	getPartialMolarCp (doublereal *cpbar) const
	Returns an array of partial molar Heat Capacities at constant pressure of the species in the solution. More...

virtual void	getPartialMolarVolumes (doublereal *vbar) const
	returns an array of partial molar volumes of the species in the solution. More...

virtual void	getStandardChemPotentials (doublereal *mu0) const
	Get the array of standard state chemical potentials at unit activity for the species at their standard states at the current T and P of the solution. More...

virtual doublereal	standardConcentration (size_t k=0) const
	Return the standard concentration for the kth species. More...

virtual doublereal	logStandardConc (size_t k=0) const
	Natural logarithm of the standard concentration of the kth species. More...

Public Member Functions inherited from ThermoPhase
	ThermoPhase ()
	Constructor. More...

virtual	~ThermoPhase ()
	Destructor. Deletes the species thermo manager. More...

	ThermoPhase (const ThermoPhase &right)
	Copy Constructor for the ThermoPhase object. More...

ThermoPhase &	operator= (const ThermoPhase &right)
	Assignment operator. More...

doublereal	_RT () const
	Return the Gas Constant multiplied by the current temperature. More...

doublereal	Hf298SS (const int k) const
	Report the 298 K Heat of Formation of the standard state of one species (J kmol-1) More...

virtual void	modifyOneHf298SS (const int k, const doublereal Hf298New)
	Modify the value of the 298 K Heat of Formation of one species in the phase (J kmol-1) More...

bool	chargeNeutralityNecessary () const
	Returns the chargeNeutralityNecessity boolean. More...

virtual doublereal	cv_vib (int, double) const

virtual doublereal	isothermalCompressibility () const
	Returns the isothermal compressibility. Units: 1/Pa. More...

virtual doublereal	thermalExpansionCoeff () const
	Return the volumetric thermal expansion coefficient. Units: 1/K. More...

void	setElectricPotential (doublereal v)
	Set the electric potential of this phase (V). More...

doublereal	electricPotential () const
	Returns the electric potential of this phase (V). More...

virtual int	activityConvention () const
	This method returns the convention used in specification of the activities, of which there are currently two, molar- and molality-based conventions. More...

virtual void	getUnitsStandardConc (double *uA, int k=0, int sizeUA=6) const
	Returns the units of the standard and generalized concentrations. More...

virtual void	getActivities (doublereal *a) const
	Get the array of non-dimensional activities at the current solution temperature, pressure, and solution concentration. More...

virtual void	getLnActivityCoefficients (doublereal *lnac) const
	Get the array of non-dimensional molar-based ln activity coefficients at the current solution temperature, pressure, and solution concentration. More...

virtual void	getChemPotentials_RT (doublereal *mu) const
	Get the array of non-dimensional species chemical potentials These are partial molar Gibbs free energies. More...

void	getElectrochemPotentials (doublereal *mu) const
	Get the species electrochemical potentials. More...

virtual void	getPartialMolarIntEnergies (doublereal *ubar) const
	Return an array of partial molar internal energies for the species in the mixture. More...

virtual void	getdPartialMolarVolumes_dT (doublereal *d_vbar_dT) const
	Return an array of derivatives of partial molar volumes wrt temperature for the species in the mixture. More...

virtual void	getdPartialMolarVolumes_dP (doublereal *d_vbar_dP) const
	Return an array of derivatives of partial molar volumes wrt pressure for the species in the mixture. More...

virtual void	getEnthalpy_RT (doublereal *hrt) const
	Get the nondimensional Enthalpy functions for the species at their standard states at the current T and P of the solution. More...

virtual void	getEntropy_R (doublereal *sr) const
	Get the array of nondimensional Entropy functions for the standard state species at the current T and P of the solution. More...

virtual void	getGibbs_RT (doublereal *grt) const
	Get the nondimensional Gibbs functions for the species in their standard states at the current T and P of the solution. More...

virtual void	getPureGibbs (doublereal *gpure) const
	Get the Gibbs functions for the standard state of the species at the current T and P of the solution. More...

virtual void	getIntEnergy_RT (doublereal *urt) const
	Returns the vector of nondimensional Internal Energies of the standard state species at the current T and P of the solution. More...

virtual void	getCp_R (doublereal *cpr) const
	Get the nondimensional Heat Capacities at constant pressure for the species standard states at the current T and P of the solution. More...

virtual void	getStandardVolumes (doublereal *vol) const
	Get the molar volumes of the species standard states at the current T and P of the solution. More...

virtual void	getdStandardVolumes_dT (doublereal *d_vol_dT) const
	Get the derivative of the molar volumes of the species standard states wrt temperature at the current T and P of the solution. More...

virtual void	getdStandardVolumes_dP (doublereal *d_vol_dP) const
	Get the derivative molar volumes of the species standard states wrt pressure at the current T and P of the solution. More...

virtual void	getEnthalpy_RT_ref (doublereal *hrt) const
	Returns the vector of nondimensional enthalpies of the reference state at the current temperature of the solution and the reference pressure for the species. More...

virtual void	getEntropy_R_ref (doublereal *er) const
	Returns the vector of nondimensional entropies of the reference state at the current temperature of the solution and the reference pressure for each species. More...

virtual void	getIntEnergy_RT_ref (doublereal *urt) const
	Returns the vector of nondimensional internal Energies of the reference state at the current temperature of the solution and the reference pressure for each species. More...

virtual void	getCp_R_ref (doublereal *cprt) const
	Returns the vector of nondimensional constant pressure heat capacities of the reference state at the current temperature of the solution and reference pressure for each species. More...

virtual void	getStandardVolumes_ref (doublereal *vol) const
	Get the molar volumes of the species reference states at the current T and P_ref of the solution. More...

virtual void	setReferenceComposition (const doublereal *const x)
	Sets the reference composition. More...

virtual void	getReferenceComposition (doublereal *const x) const
	Gets the reference composition. More...

doublereal	enthalpy_mass () const
	Specific enthalpy. More...

doublereal	intEnergy_mass () const
	Specific internal energy. More...

doublereal	entropy_mass () const
	Specific entropy. More...

doublereal	gibbs_mass () const
	Specific Gibbs function. More...

doublereal	cp_mass () const
	Specific heat at constant pressure. More...

doublereal	cv_mass () const
	Specific heat at constant volume. More...

virtual void	setToEquilState (const doublereal *lambda_RT)
	This method is used by the ChemEquil equilibrium solver. More...

void	setElementPotentials (const vector_fp &lambda)
	Stores the element potentials in the ThermoPhase object. More...

bool	getElementPotentials (doublereal *lambda) const
	Returns the element potentials stored in the ThermoPhase object. More...

virtual doublereal	critTemperature () const
	Critical temperature (K). More...

virtual doublereal	critPressure () const
	Critical pressure (Pa). More...

virtual doublereal	critDensity () const
	Critical density (kg/m3). More...

virtual doublereal	satTemperature (doublereal p) const
	Return the saturation temperature given the pressure. More...

virtual doublereal	satPressure (doublereal t)
	Return the saturation pressure given the temperature. More...

virtual doublereal	vaporFraction () const
	Return the fraction of vapor at the current conditions. More...

virtual void	setState_Tsat (doublereal t, doublereal x)
	Set the state to a saturated system at a particular temperature. More...

virtual void	setState_Psat (doublereal p, doublereal x)
	Set the state to a saturated system at a particular pressure. More...

void	saveSpeciesData (const size_t k, const XML_Node *const data)
	Store a reference pointer to the XML tree containing the species data for this phase. More...

const std::vector< const XML_Node * > &	speciesData () const
	Return a pointer to the vector of XML nodes containing the species data for this phase. More...

void	setSpeciesThermo (SpeciesThermo *spthermo)
	Install a species thermodynamic property manager. More...

virtual SpeciesThermo &	speciesThermo (int k=-1)
	Return a changeable reference to the calculation manager for species reference-state thermodynamic properties. More...

virtual void	initThermoFile (const std::string &inputFile, const std::string &id)

virtual void	initThermoXML (XML_Node &phaseNode, const std::string &id)
	Import and initialize a ThermoPhase object using an XML tree. More...

virtual void	setParameters (int n, doublereal *const c)
	Set the equation of state parameters. More...

virtual void	getParameters (int &n, doublereal *const c) const
	Get the equation of state parameters in a vector. More...

virtual void	setStateFromXML (const XML_Node &state)
	Set the initial state of the phase to the conditions specified in the state XML element. More...

virtual void	getdlnActCoeffds (const doublereal dTds, const doublereal const dXds, doublereal dlnActCoeffds) const
	Get the change in activity coefficients wrt changes in state (temp, mole fraction, etc) along a line in parameter space or along a line in physical space. More...

virtual void	getdlnActCoeffdlnX_diag (doublereal *dlnActCoeffdlnX_diag) const
	Get the array of ln mole fraction derivatives of the log activity coefficients - diagonal component only. More...

virtual void	getdlnActCoeffdlnN_diag (doublereal *dlnActCoeffdlnN_diag) const
	Get the array of log species mole number derivatives of the log activity coefficients. More...

virtual void	getdlnActCoeffdlnN (const size_t ld, doublereal *const dlnActCoeffdlnN)
	Get the array of derivatives of the log activity coefficients with respect to the log of the species mole numbers. More...

virtual void	getdlnActCoeffdlnN_numderiv (const size_t ld, doublereal *const dlnActCoeffdlnN)

virtual std::string	report (bool show_thermo=true) const
	returns a summary of the state of the phase as a string More...

virtual void	reportCSV (std::ofstream &csvFile) const
	returns a summary of the state of the phase to a comma separated file. More...

virtual void	setState_TPX (doublereal t, doublereal p, const doublereal *x)
	Set the temperature (K), pressure (Pa), and mole fractions. More...

virtual void	setState_TPX (doublereal t, doublereal p, compositionMap &x)
	Set the temperature (K), pressure (Pa), and mole fractions. More...

virtual void	setState_TPX (doublereal t, doublereal p, const std::string &x)
	Set the temperature (K), pressure (Pa), and mole fractions. More...

virtual void	setState_TPY (doublereal t, doublereal p, const doublereal *y)
	Set the internally stored temperature (K), pressure (Pa), and mass fractions of the phase. More...

virtual void	setState_TPY (doublereal t, doublereal p, compositionMap &y)
	Set the internally stored temperature (K), pressure (Pa), and mass fractions of the phase. More...

virtual void	setState_TPY (doublereal t, doublereal p, const std::string &y)
	Set the internally stored temperature (K), pressure (Pa), and mass fractions of the phase. More...

virtual void	setState_TP (doublereal t, doublereal p)
	Set the temperature (K) and pressure (Pa) More...

virtual void	setState_PX (doublereal p, doublereal *x)
	Set the pressure (Pa) and mole fractions. More...

virtual void	setState_PY (doublereal p, doublereal *y)
	Set the internally stored pressure (Pa) and mass fractions. More...

virtual void	setState_HP (doublereal h, doublereal p, doublereal tol=1.e-4)
	Set the internally stored specific enthalpy (J/kg) and pressure (Pa) of the phase. More...

virtual void	setState_UV (doublereal u, doublereal v, doublereal tol=1.e-4)
	Set the specific internal energy (J/kg) and specific volume (m^3/kg). More...

virtual void	setState_SP (doublereal s, doublereal p, doublereal tol=1.e-4)
	Set the specific entropy (J/kg/K) and pressure (Pa). More...

virtual void	setState_SV (doublereal s, doublereal v, doublereal tol=1.e-4)
	Set the specific entropy (J/kg/K) and specific volume (m^3/kg). More...

Public Member Functions inherited from Phase
	Phase ()
	Default constructor. More...

virtual	~Phase ()
	Destructor. More...

	Phase (const Phase &right)
	Copy Constructor. More...

Phase &	operator= (const Phase &right)
	Assignment operator. More...

XML_Node &	xml ()
	Returns a reference to the XML_Node stored for the phase. More...

void	saveState (vector_fp &state) const
	Save the current internal state of the phase Write to vector 'state' the current internal state. More...

void	saveState (size_t lenstate, doublereal *state) const
	Write to array 'state' the current internal state. More...

void	restoreState (const vector_fp &state)
	Restore a state saved on a previous call to saveState. More...

void	restoreState (size_t lenstate, const doublereal *state)
	Restore the state of the phase from a previously saved state vector. More...

doublereal	molecularWeight (size_t k) const
	Molecular weight of species `k`. More...

void	getMolecularWeights (vector_fp &weights) const
	Copy the vector of molecular weights into vector weights. More...

void	getMolecularWeights (doublereal *weights) const
	Copy the vector of molecular weights into array weights. More...

const vector_fp &	molecularWeights () const
	Return a const reference to the internal vector of molecular weights. More...

doublereal	size (size_t k) const
	This routine returns the size of species k. More...

doublereal	charge (size_t k) const
	Dimensionless electrical charge of a single molecule of species k The charge is normalized by the the magnitude of the electron charge. More...

doublereal	chargeDensity () const
	Charge density [C/m^3]. More...

size_t	nDim () const
	Returns the number of spatial dimensions (1, 2, or 3) More...

void	setNDim (size_t ndim)
	Set the number of spatial dimensions (1, 2, or 3). More...

virtual void	freezeSpecies ()
	Call when finished adding species. More...

bool	speciesFrozen ()
	True if freezeSpecies has been called. More...

virtual bool	ready () const

int	stateMFNumber () const
	Return the State Mole Fraction Number. More...

std::string	id () const
	Return the string id for the phase. More...

void	setID (const std::string &id)
	Set the string id for the phase. More...

std::string	name () const
	Return the name of the phase. More...

void	setName (const std::string &nm)
	Sets the string name for the phase. More...

std::string	elementName (size_t m) const
	Name of the element with index m. More...

size_t	elementIndex (const std::string &name) const
	Return the index of element named 'name'. More...

const std::vector< std::string > &	elementNames () const
	Return a read-only reference to the vector of element names. More...

doublereal	atomicWeight (size_t m) const
	Atomic weight of element m. More...

doublereal	entropyElement298 (size_t m) const
	Entropy of the element in its standard state at 298 K and 1 bar. More...

int	atomicNumber (size_t m) const
	Atomic number of element m. More...

int	elementType (size_t m) const
	Return the element constraint type Possible types include: More...

int	changeElementType (int m, int elem_type)
	Change the element type of the mth constraint Reassigns an element type. More...

const vector_fp &	atomicWeights () const
	Return a read-only reference to the vector of atomic weights. More...

size_t	nElements () const
	Number of elements. More...

void	checkElementIndex (size_t m) const
	Check that the specified element index is in range Throws an exception if m is greater than nElements()-1. More...

void	checkElementArraySize (size_t mm) const
	Check that an array size is at least nElements() Throws an exception if mm is less than nElements(). More...

doublereal	nAtoms (size_t k, size_t m) const
	Number of atoms of element `m` in species `k`. More...

void	getAtoms (size_t k, double *atomArray) const
	Get a vector containing the atomic composition of species k. More...

size_t	speciesIndex (const std::string &name) const
	Returns the index of a species named 'name' within the Phase object. More...

std::string	speciesName (size_t k) const
	Name of the species with index k. More...

std::string	speciesSPName (int k) const
	Returns the expanded species name of a species, including the phase name This is guaranteed to be unique within a Cantera problem. More...

const std::vector< std::string > &	speciesNames () const
	Return a const reference to the vector of species names. More...

size_t	nSpecies () const
	Returns the number of species in the phase. More...

void	checkSpeciesIndex (size_t k) const
	Check that the specified species index is in range Throws an exception if k is greater than nSpecies()-1. More...

void	checkSpeciesArraySize (size_t kk) const
	Check that an array size is at least nSpecies() Throws an exception if kk is less than nSpecies(). More...

void	setMoleFractionsByName (compositionMap &xMap)
	Set the species mole fractions by name. More...

void	setMoleFractionsByName (const std::string &x)
	Set the mole fractions of a group of species by name. More...

void	setMassFractionsByName (compositionMap &yMap)
	Set the species mass fractions by name. More...

void	setMassFractionsByName (const std::string &x)
	Set the species mass fractions by name. More...

void	setState_TRX (doublereal t, doublereal dens, const doublereal *x)
	Set the internally stored temperature (K), density, and mole fractions. More...

void	setState_TRX (doublereal t, doublereal dens, compositionMap &x)
	Set the internally stored temperature (K), density, and mole fractions. More...

void	setState_TRY (doublereal t, doublereal dens, const doublereal *y)
	Set the internally stored temperature (K), density, and mass fractions. More...

void	setState_TRY (doublereal t, doublereal dens, compositionMap &y)
	Set the internally stored temperature (K), density, and mass fractions. More...

void	setState_TNX (doublereal t, doublereal n, const doublereal *x)
	Set the internally stored temperature (K), molar density (kmol/m^3), and mole fractions. More...

void	setState_TR (doublereal t, doublereal rho)
	Set the internally stored temperature (K) and density (kg/m^3) More...

void	setState_TX (doublereal t, doublereal *x)
	Set the internally stored temperature (K) and mole fractions. More...

void	setState_TY (doublereal t, doublereal *y)
	Set the internally stored temperature (K) and mass fractions. More...

void	setState_RX (doublereal rho, doublereal *x)
	Set the density (kg/m^3) and mole fractions. More...

void	setState_RY (doublereal rho, doublereal *y)
	Set the density (kg/m^3) and mass fractions. More...

void	getMoleFractionsByName (compositionMap &x) const
	Get the mole fractions by name. More...

doublereal	moleFraction (size_t k) const
	Return the mole fraction of a single species. More...

doublereal	moleFraction (const std::string &name) const
	Return the mole fraction of a single species. More...

doublereal	massFraction (size_t k) const
	Return the mass fraction of a single species. More...

doublereal	massFraction (const std::string &name) const
	Return the mass fraction of a single species. More...

void	getMoleFractions (doublereal *const x) const
	Get the species mole fraction vector. More...

virtual void	setMoleFractions_NoNorm (const doublereal *const x)
	Set the mole fractions to the specified values without normalizing. More...

void	getMassFractions (doublereal *const y) const
	Get the species mass fractions. More...

const doublereal *	massFractions () const
	Return a const pointer to the mass fraction array. More...

void	getConcentrations (doublereal *const c) const
	Get the species concentrations (kmol/m^3). More...

doublereal	concentration (const size_t k) const
	Concentration of species k. More...

const doublereal *	moleFractdivMMW () const
	Returns a const pointer to the start of the moleFraction/MW array. More...

doublereal	temperature () const
	Temperature (K). More...

virtual doublereal	density () const
	Density (kg/m^3). More...

doublereal	molarDensity () const
	Molar density (kmol/m^3). More...

doublereal	molarVolume () const
	Molar volume (m^3/kmol). More...

virtual void	setDensity (const doublereal density_)
	Set the internally stored density (kg/m^3) of the phase Note the density of a phase is an independent variable. More...

virtual void	setMolarDensity (const doublereal molarDensity)
	Set the internally stored molar density (kmol/m^3) of the phase. More...

virtual void	setTemperature (const doublereal temp)
	Set the internally stored temperature of the phase (K). More...

doublereal	mean_X (const doublereal *const Q) const
	Evaluate the mole-fraction-weighted mean of an array Q. More...

doublereal	mean_Y (const doublereal *const Q) const
	Evaluate the mass-fraction-weighted mean of an array Q. More...

doublereal	meanMolecularWeight () const
	The mean molecular weight. Units: (kg/kmol) More...

doublereal	sum_xlogx () const
	Evaluate \( \sum_k X_k \log X_k \). More...

doublereal	sum_xlogQ (doublereal *const Q) const
	Evaluate \( \sum_k X_k \log Q_k \). More...

void	addElement (const std::string &symbol, doublereal weight=-12345.0)
	Add an element. More...

void	addElement (const XML_Node &e)
	Add an element from an XML specification. More...

void	addUniqueElement (const std::string &symbol, doublereal weight=-12345.0, int atomicNumber=0, doublereal entropy298=ENTROPY298_UNKNOWN, int elem_type=CT_ELEM_TYPE_ABSPOS)
	Add an element, checking for uniqueness The uniqueness is checked by comparing the string symbol. More...

void	addUniqueElement (const XML_Node &e)
	Add an element, checking for uniqueness The uniqueness is checked by comparing the string symbol. More...

void	addElementsFromXML (const XML_Node &phase)
	Add all elements referenced in an XML_Node tree. More...

void	freezeElements ()
	Prohibit addition of more elements, and prepare to add species. More...

bool	elementsFrozen ()
	True if freezeElements has been called. More...

size_t	addUniqueElementAfterFreeze (const std::string &symbol, doublereal weight, int atomicNumber, doublereal entropy298=ENTROPY298_UNKNOWN, int elem_type=CT_ELEM_TYPE_ABSPOS)
	Add an element after elements have been frozen, checking for uniqueness The uniqueness is checked by comparing the string symbol. More...

void	addSpecies (const std::string &name, const doublereal *comp, doublereal charge=0.0, doublereal size=1.0)

void	addUniqueSpecies (const std::string &name, const doublereal *comp, doublereal charge=0.0, doublereal size=1.0)
	Add a species to the phase, checking for uniqueness of the name This routine checks for uniqueness of the string name. More...

Thermodynamic Values for the Species Reference States
doublereal	m_tlast
	Last temperature at which the reference thermo was calculated. More...

doublereal	m_press
	Current value of the pressure. More...

doublereal	m_molar_density
	Current value of the molar density. More...

size_t	m_nlattice
	Number of sublattice phases. More...

std::vector< LatticePhase * >	m_lattice
	Vector of sublattic ThermoPhase objects. More...

vector_fp	m_x
	Vector of mole fractions. More...

std::vector< doublereal >	theta_
	Lattice stoichiometric coefficients. More...

vector_fp	tmpV_
	Temporary vector. More...

std::vector< size_t >	lkstart_

virtual void	getGibbs_RT_ref (doublereal *grt) const
	Returns the vector of nondimensional enthalpies of the reference state at the current temperature of the solution and the reference pressure for the species. More...

virtual void	getGibbs_ref (doublereal *g) const
	Returns the vector of the gibbs function of the reference state at the current temperatureof the solution and the reference pressure for the species. More...

virtual void	initThermo ()
	Initialize the ThermoPhase object after all species have been set up. More...

void	initLengths ()
	Initialize vectors that depend on the number of species and sublattices. More...

virtual void	installSlavePhases (Cantera::XML_Node *phaseNode)
	Add in species from Slave phases. More...

virtual void	setParametersFromXML (const XML_Node &eosdata)
	Set equation of state parameter values from XML entries. More...

void	setLatticeMoleFractionsByName (int n, const std::string &x)
	Set the Lattice mole fractions using a string. More...

doublereal	err (const std::string &msg) const
	error routine More...

void	_updateThermo () const
	Update the reference thermodynamic functions. More...

Additional Inherited Members
Protected Member Functions inherited from ThermoPhase
virtual void	getCsvReportData (std::vector< std::string > &names, std::vector< vector_fp > &data) const
	Fills `names` and `data` with the column names and species thermo properties to be included in the output of the reportCSV method. More...

Protected Member Functions inherited from Phase
void	init (const vector_fp &mw)

void	setMolecularWeight (const int k, const double mw)
	Set the molecular weight of a single species to a given value. More...

Protected Attributes inherited from ThermoPhase
SpeciesThermo *	m_spthermo
	Pointer to the calculation manager for species reference-state thermodynamic properties. More...

std::vector< const XML_Node * >	m_speciesData
	Vector of pointers to the species databases. More...

doublereal	m_phi
	Stored value of the electric potential for this phase. More...

vector_fp	m_lambdaRRT
	Vector of element potentials. More...

bool	m_hasElementPotentials
	Boolean indicating whether there is a valid set of saved element potentials for this phase. More...

bool	m_chargeNeutralityNecessary
	Boolean indicating whether a charge neutrality condition is a necessity. More...

int	m_ssConvention
	Contains the standard state convention. More...

std::vector< doublereal >	xMol_Ref
	Reference Mole Fraction Composition. More...

Protected Attributes inherited from Phase
size_t	m_kk
	Number of species in the phase. More...

size_t	m_ndim
	Dimensionality of the phase. More...

vector_fp	m_speciesComp
	Atomic composition of the species. More...

vector_fp	m_speciesSize
	Vector of species sizes. More...

vector_fp	m_speciesCharge
	Vector of species charges. length m_kk. More...

Detailed Description

A phase that is comprised of a fixed additive combination of other lattice phases.

This is the main way Cantera describes semiconductors and other solid phases. This ThermoPhase object calculates its properties as a sum over other LatticePhase objects. Each of the LatticePhase objects is a ThermoPhase object by itself.

The results from this LatticeSolidPhase model reduces to the LatticePhase model when there is one lattice phase and the molar densities of the sublattice and the molar density within the LatticeSolidPhase have the same values.

The mole fraction vector is redefined witin the the LatticeSolidPhase object. Each of the mole fractions sum to one on each of the sublattices. The routine getMoleFraction() and setMoleFraction() have been redefined to use this convention.

Specification of Species Standard State Properties

The standard state properties are calculated in the normal way for each of the sublattices. The normal way here means that a thermodynamic polynomial in temperature is developed. Also, a constant volume approximation for the pressure dependence is assumed. All of these properties are on a Joules per kmol of sublattice constituent basis.

Specification of Solution Thermodynamic Properties

The sum over the LatticePhase objects is carried out by weighting each LatticePhase object value with the molar density (kmol m-3) of its LatticePhase. Then the resulting quantity is divided by the molar density of the total compound. The LatticeSolidPhase object therefore only contains a listing of the number of LatticePhase object that comprises the solid, and it contains a value for the molar density of the entire mixture. This is the same thing as saying that

\[ L_i = L^{solid} \theta_i \]

\( L_i \) is the molar volume of the ith lattice. \( L^{solid} \) is the molar volume of the entire solid. \( \theta_i \) is a fixed weighting factor for the ith lattice representing the lattice stoichiometric coefficient. For this object the \( \theta_i \) values are fixed.

Let's take FeS2 as an example, which may be thought of as a combination of two lattices: Fe and S lattice. The Fe sublattice has a molar density of 1 gmol cm-3. The S sublattice has a molar density of 2 gmol cm-3. We then define the LatticeSolidPhase object as having a nominal composition of FeS2, and having a molar density of 1 gmol cm-3. All quantities pertaining to the FeS2 compound will be have weights associated with the sublattices. The Fe sublattice will have a weight of 1.0 associated with it. The S sublattice will have a weight of 2.0 associated with it.

Specification of Solution Density Properties

Currently, molar density is not a constant within the object, even though the species molar volumes are a constant. The basic idea is that a swelling of one of the sublattices will result in a swelling of of all of the lattices. Therefore, the molar volumes of the individual lattices are not independent of one another.

The molar volume of the Lattice solid is calculated from the following formula

\[ V = \sum_i{ \theta_i V_i^{lattice}} \]

where \( V_i^{lattice} \) is the molar volume of the ith sublattice. This is calculated from the following standard formula.

\[ V_i = \sum_k{ X_k V_k} \]

where k is a species in the ith sublattice.

The mole fraction vector is redefined witin the the LatticeSolidPhase object. Each of the mole fractions sum to one on each of the sublattices. The routine getMoleFraction() and setMoleFraction() have been redefined to use this convention.

(This object is still under construction)

Definition at line 106 of file LatticeSolidPhase.h.

Constructor & Destructor Documentation

LatticeSolidPhase ( )

Base empty constructor.

Definition at line 22 of file LatticeSolidPhase.cpp.

Referenced by LatticeSolidPhase::duplMyselfAsThermoPhase().

LatticeSolidPhase ( const LatticeSolidPhase & right )

Copy Constructor.

Parameters

right Object to be copied

Definition at line 34 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::operator=().

~LatticeSolidPhase ( )

virtual

Destructor.

Definition at line 64 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

Member Function Documentation

LatticeSolidPhase & operator= ( const LatticeSolidPhase & right )

Assignment operator.

Parameters

right Object to be copied

Definition at line 48 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_molar_density, LatticeSolidPhase::m_nlattice, LatticeSolidPhase::m_press, LatticeSolidPhase::m_tlast, LatticeSolidPhase::m_x, ThermoPhase::operator=(), LatticeSolidPhase::theta_, and LatticeSolidPhase::tmpV_.

Referenced by LatticeSolidPhase::LatticeSolidPhase().

ThermoPhase * duplMyselfAsThermoPhase ( ) const

virtual

Duplication function.

This virtual function is used to create a duplicate of the current phase. It's used to duplicate the phase when given a ThermoPhase pointer to the phase.

Returns: It returns a ThermoPhase pointer.

Reimplemented from ThermoPhase.

Definition at line 73 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::LatticeSolidPhase().

virtual int eosType ( ) const

inlinevirtual

Equation of state type flag.

Returns cLatticeSolid, listed in mix_defs.h.

Reimplemented from ThermoPhase.

Definition at line 141 of file LatticeSolidPhase.h.

doublereal minTemp ( size_t k = npos ) const

virtual

Minimum temperature for which the thermodynamic data for the species or phase are valid.

If no argument is supplied, the value returned will be the lowest temperature at which the data for all species are valid. Otherwise, the value will be only for species k. This function is a wrapper that calls the species thermo minTemp function.

Parameters

k	index of the species. Default is -1, which will return the max of the min value over all species.

Reimplemented from ThermoPhase.

Definition at line 78 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and Cantera::npos.

doublereal maxTemp ( size_t k = npos ) const

virtual

Maximum temperature for which the thermodynamic data for the species are valid.

If no argument is supplied, the value returned will be the highest temperature at which the data for all species are valid. Otherwise, the value will be only for species k. This function is a wrapper that calls the species thermo maxTemp function.

Parameters

k	index of the species. Default is -1, which will return the min of the max value over all species.

Reimplemented from ThermoPhase.

Definition at line 95 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and Cantera::npos.

doublereal refPressure ( ) const

virtual

Returns the reference pressure in Pa.

This function is a wrapper that calls the species thermo refPressure function.

Reimplemented from ThermoPhase.

Definition at line 112 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::m_lattice.

virtual int standardStateConvention ( ) const

inlinevirtual

This method returns the convention used in specification of the standard state, of which there are currently two, temperature based, and variable pressure based.

All of the thermo is determined by slave ThermoPhase routines.

Reimplemented from ThermoPhase.

Definition at line 183 of file LatticeSolidPhase.h.

References Cantera::cSS_CONVENTION_SLAVE.

doublereal enthalpy_mole ( ) const

virtual

Return the Molar Enthalpy. Units: J/kmol.

The molar enthalpy is determined by the following formula, where \( \theta_n \) is the lattice stoichiometric coefficient of the nth lattice

\[ \tilde h(T,P) = {\sum_n \theta_n \tilde h_n(T,P) } \]

\( \tilde h_n(T,P) \) is the enthalpy of the n^th lattice.

units J/kmol

Reimplemented from ThermoPhase.

Definition at line 117 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::theta_.

doublereal intEnergy_mole ( ) const

virtual

Return the Molar Internal Energy. Units: J/kmol.

The molar enthalpy is determined by the following formula, where \( \theta_n \) is the lattice stoichiometric coefficient of the nth lattice

\[ \tilde u(T,P) = {\sum_n \theta_n \tilde u_n(T,P) } \]

\( \tilde u_n(T,P) \) is the internal energy of the n^th lattice.

units J/kmol

Reimplemented from ThermoPhase.

Definition at line 127 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::theta_.

doublereal entropy_mole ( ) const

virtual

Return the Molar Entropy. Units: J/kmol/K.

The molar enthalpy is determined by the following formula, where \( \theta_n \) is the lattice stoichiometric coefficient of the nth lattice

\[ \tilde s(T,P) = \sum_n \theta_n \tilde s_n(T,P) \]

\( \tilde s_n(T,P) \) is the molar entropy of the n^th lattice.

units J/kmol/K

Reimplemented from ThermoPhase.

Definition at line 137 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::theta_.

doublereal gibbs_mole ( ) const

virtual

Return the Molar Gibbs energy. Units: J/kmol.

The molar gibbs free energy is determined by the following formula, where \( \theta_n \) is the lattice stoichiometric coefficient of the nth lattice

\[ \tilde h(T,P) = {\sum_n \theta_n \tilde h_n(T,P) } \]

\( \tilde h_n(T,P) \) is the enthalpy of the n^th lattice.

units J/kmol

Reimplemented from ThermoPhase.

Definition at line 147 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::theta_.

doublereal cp_mole ( ) const

virtual

Return the constant pressure heat capacity. Units: J/kmol/K.

The molar constant pressure heat capacity is determined by the following formula, where \( C_n \) is the lattice molar density of the nth lattice, and \( C_T \) is the molar density of the solid compound.

\[ \tilde c_{p,n}(T,P) = \frac{\sum_n C_n \tilde c_{p,n}(T,P) }{C_T}, \]

\( \tilde c_{p,n}(T,P) \) is the heat capacity of the n^th lattice.

units J/kmol/K

Reimplemented from ThermoPhase.

Definition at line 157 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::theta_.

Referenced by LatticeSolidPhase::cv_mole().

virtual doublereal cv_mole ( ) const

inlinevirtual

Return the constant volume heat capacity. Units: J/kmol/K.

The molar constant volume heat capacity is determined by the following formula, where \( C_n \) is the lattice molar density of the nth lattice, and \( C_T \) is the molar density of the solid compound.

\[ \tilde c_{v,n}(T,P) = \frac{\sum_n C_n \tilde c_{v,n}(T,P) }{C_T}, \]

\( \tilde c_{v,n}(T,P) \) is the heat capacity of the n^th lattice.

units J/kmol/K

Reimplemented from ThermoPhase.

Definition at line 277 of file LatticeSolidPhase.h.

References LatticeSolidPhase::cp_mole().

virtual doublereal pressure ( ) const

inlinevirtual

Report the Pressure. Units: Pa.

This method simply returns the stored pressure value.

Reimplemented from ThermoPhase.

Definition at line 285 of file LatticeSolidPhase.h.

References LatticeSolidPhase::m_press.

void setPressure ( doublereal p )

virtual

Set the pressure at constant temperature. Units: Pa.

Parameters

p	Pressure (units - Pa)

Reimplemented from ThermoPhase.

Definition at line 194 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::calcDensity(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::m_press.

doublereal calcDensity ( )

Calculate the density of the solid mixture.

The formula for this is

\[ \rho = \sum_n{ \rho_n \theta_n } \]

where \( \rho_n \) is the density of the nth sublattice

Definition at line 203 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, Phase::setDensity(), and LatticeSolidPhase::theta_.

Referenced by LatticeSolidPhase::setMoleFractions(), and LatticeSolidPhase::setPressure().

void setMoleFractions ( const doublereal *const x )

virtual

Set the mole fractions to the specified values, and then normalize them so that they sum to 1.0 for each of the subphases.

On input, the mole fraction vector is assumed to sum to one for each of the sublattices. The sublattices are updated with this mole fraction vector. The mole fractions are also stored within this object, after they are normalized to one by dividing by the number of sublattices.

Parameters

x	Input vector of mole fractions. There is no restriction on the sum of the mole fraction vector. Internally, this object will pass portions of this vector to the sublattices which assume that the portions individually sum to one. Length is m_kk.

Reimplemented from Phase.

Definition at line 213 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::calcDensity(), DATA_PTR, LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, LatticeSolidPhase::m_x, and Phase::setMoleFractions().

Referenced by LatticeSolidPhase::initThermo(), and LatticeSolidPhase::setLatticeMoleFractionsByName().

void getMoleFractions ( doublereal *const x ) const

virtual

Get the species mole fraction vector.

On output the mole fraction vector will sum to one for each of the subphases which make up this phase.

Parameters

x	On return, x contains the mole fractions. Must have a length greater than or equal to the number of species.

Definition at line 228 of file LatticeSolidPhase.cpp.

References Phase::getMoleFractions(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, and LatticeSolidPhase::m_x.

Referenced by LatticeSolidPhase::_updateThermo().

doublereal moleFraction ( const int k ) const

inline

The mole fraction of species k.

If k is outside the valid range, an exception will be thrown. Note that it is somewhat more efficient to call getMoleFractions if the mole fractions of all species are desired.

Parameters

k	species index

Definition at line 340 of file LatticeSolidPhase.h.

References LatticeSolidPhase::err().

void getMassFractions ( doublereal *const y ) const

inline

Get the species mass fractions.

Parameters

y	On return, y contains the mass fractions. Array y must have a length greater than or equal to the number of species.

Definition at line 349 of file LatticeSolidPhase.h.

References LatticeSolidPhase::err().

doublereal massFraction ( const int k ) const

inline

Mass fraction of species k.

If k is outside the valid range, an exception will be thrown. Note that it is somewhat more efficient to call getMassFractions if the mass fractions of all species are desired.

Parameters

k	species index

Definition at line 360 of file LatticeSolidPhase.h.

References LatticeSolidPhase::err().

virtual void setMassFractions ( const doublereal *const y )

inlinevirtual

Set the mass fractions to the specified values, and then normalize them so that they sum to 1.0.

Parameters

y Array of unnormalized mass fraction values (input). Must have a length greater than or equal to the number of species. Input vector of mass fractions. There is no restriction on the sum of the mass fraction vector. Internally, the State object will normalize this vector before storing its contents. Length is m_kk.

Reimplemented from Phase.

Definition at line 375 of file LatticeSolidPhase.h.

References LatticeSolidPhase::err().

virtual void setMassFractions_NoNorm ( const doublereal *const y )

inlinevirtual

Set the mass fractions to the specified values without normalizing.

This is useful when the normalization condition is being handled by some other means, for example by a constraint equation as part of a larger set of equations.

Parameters

y	Input vector of mass fractions. Length is m_kk.

Reimplemented from Phase.

Definition at line 388 of file LatticeSolidPhase.h.

References LatticeSolidPhase::err().

virtual void setConcentrations ( const doublereal *const conc )

inlinevirtual

Set the concentrations to the specified values within the phase.

We set the concentrations here and therefore we set the overall density of the phase. We hold the temperature constant during this operation. Therefore, we have possibly changed the pressure of the phase by calling this routine.

Parameters

[in] conc Array of concentrations in dimensional units. For bulk phases c[k] is the concentration of the kth species in kmol/m3. For surface phases, c[k] is the concentration in kmol/m2. The length of the vector is the number of species in the phase.

Reimplemented from Phase.

Definition at line 400 of file LatticeSolidPhase.h.

References LatticeSolidPhase::err().

void getActivityConcentrations ( doublereal * c ) const

virtual

This method returns an array of generalized activity concentrations.

The generalized activity concentrations, \( C^a_k \), are defined such that \( a_k = C^a_k / C^0_k, \) where \( C^0_k \) is a standard concentration defined below and \( a_k \) are activities used in the thermodynamic functions. These activity (or generalized) concentrations are used by kinetics manager classes to compute the forward and reverse rates of elementary reactions. Note that they may or may not have units of concentration — they might be partial pressures, mole fractions, or surface coverages, for example.

Parameters

c	Output array of generalized concentrations. The units depend upon the implementation of the reaction rate expressions within the phase.

Reimplemented from ThermoPhase.

Definition at line 167 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

void getActivityCoefficients ( doublereal * ac ) const

virtual

Get the array of non-dimensional molar-based activity coefficients at the current solution temperature, pressure, and solution concentration.

Parameters

ac	Output vector of activity coefficients. Length: m_kk.

Reimplemented from ThermoPhase.

Definition at line 177 of file LatticeSolidPhase.cpp.

References Phase::m_kk.

void getChemPotentials ( doublereal * mu ) const

virtual

Get the species chemical potentials. Units: J/kmol.

This function returns a vector of chemical potentials of the species in solution at the current temperature, pressure and mole fraction of the solution.

This returns the underlying lattice chemical potentials, as the units are kmol-1 of the sublattice species.

Parameters

mu	Output vector of species chemical potentials. Length: m_kk. Units: J/kmol

Reimplemented from ThermoPhase.

Definition at line 260 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

void getPartialMolarEnthalpies ( doublereal * hbar ) const

virtual

Returns an array of partial molar enthalpies for the species in the mixture.

Units (J/kmol) For this phase, the partial molar enthalpies are equal to the pure species enthalpies

\[ \bar h_k(T,P) = \hat h^{ref}_k(T) + (P - P_{ref}) \hat V^0_k \]

The reference-state pure-species enthalpies, \( \hat h^{ref}_k(T) \), at the reference pressure, \( P_{ref} \), are computed by the species thermodynamic property manager. They are polynomial functions of temperature.

See Also: SpeciesThermo

Parameters

hbar	Output vector containing partial molar enthalpies. Length: m_kk.

Reimplemented from ThermoPhase.

Definition at line 271 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

void getPartialMolarEntropies ( doublereal * sbar ) const

virtual

Returns an array of partial molar entropies of the species in the solution.

Units: J/kmol/K. For this phase, the partial molar entropies are equal to the pure species entropies plus the ideal solution contribution.

\[ \bar s_k(T,P) = \hat s^0_k(T) - R log(X_k) \]

The reference-state pure-species entropies, \( \hat s^{ref}_k(T) \), at the reference pressure, \( P_{ref} \), are computed by the species thermodynamic property manager. They are polynomial functions of temperature.

See Also: SpeciesThermo

Parameters

sbar	Output vector containing partial molar entropies. Length: m_kk.

Reimplemented from ThermoPhase.

Definition at line 282 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

void getPartialMolarCp ( doublereal * cpbar ) const

virtual

Returns an array of partial molar Heat Capacities at constant pressure of the species in the solution.

Units: J/kmol/K. For this phase, the partial molar heat capacities are equal to the standard state heat capacities.

Parameters

cpbar Output vector of partial heat capacities. Length: m_kk.

Reimplemented from ThermoPhase.

Definition at line 293 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

void getPartialMolarVolumes ( doublereal * vbar ) const

virtual

returns an array of partial molar volumes of the species in the solution.

Units: m^3 kmol-1.

For this solution, thepartial molar volumes are equal to the constant species molar volumes.

Parameters

vbar	Output vector of partial molar volumes. Length: m_kk.

Reimplemented from ThermoPhase.

Definition at line 304 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

void getStandardChemPotentials ( doublereal * mu0 ) const

virtual

Get the array of standard state chemical potentials at unit activity for the species at their standard states at the current T and P of the solution.

These are the standard state chemical potentials \( \mu^0_k(T,P) \). The values are evaluated at the current temperature and pressure of the solution.

This returns the underlying lattice standard chemical potentials, as the units are kmol-1 of the sublattice species.

Parameters

mu0	Output vector of chemical potentials. Length: m_kk. Units: J/kmol

Reimplemented from ThermoPhase.

Definition at line 315 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

doublereal standardConcentration ( size_t k = 0 ) const

virtual

Return the standard concentration for the kth species.

The standard concentration \( C^0_k \) used to normalize the activity (i.e., generalized) concentration. In many cases, this quantity will be the same for all species in a phase - for example, for an ideal gas \( C^0_k = P/\hat R T \). For this reason, this method returns a single value, instead of an array. However, for phases in which the standard concentration is species-specific (e.g. surface species of different sizes), this method may be called with an optional parameter indicating the species.

Parameters

k	Optional parameter indicating the species. The default is to assume this refers to species 0.

Returns: Returns the standard concentration. The units are by definition dependent on the ThermoPhase and kinetics manager representation.

Reimplemented from ThermoPhase.

Definition at line 184 of file LatticeSolidPhase.cpp.

doublereal logStandardConc ( size_t k = 0 ) const

virtual

Natural logarithm of the standard concentration of the kth species.

Parameters

k	index of the species (defaults to zero)

Reimplemented from ThermoPhase.

Definition at line 189 of file LatticeSolidPhase.cpp.

void getGibbs_RT_ref ( doublereal * grt ) const

virtual

Returns the vector of nondimensional enthalpies of the reference state at the current temperature of the solution and the reference pressure for the species.

This function fills in its one entry in hrt[] by calling the underlying species thermo function for the dimensionless gibbs free energy, calculated from the dimensionless enthalpy and entropy.

Parameters

grt	Vector of dimensionless Gibbs free energies of the reference state length = m_kk

Reimplemented from ThermoPhase.

Definition at line 325 of file LatticeSolidPhase.cpp.

References LatticeSolidPhase::_updateThermo(), LatticeSolidPhase::m_lattice, and LatticeSolidPhase::m_nlattice.

Referenced by LatticeSolidPhase::getGibbs_ref().

void getGibbs_ref ( doublereal * g ) const

virtual

Returns the vector of the gibbs function of the reference state at the current temperatureof the solution and the reference pressure for the species.

units = J/kmol

This function fills in its one entry in g[] by calling the underlying species thermo functions for the gibbs free energy, calculated from enthalpy and the entropy, and the multiplying by RT.

Parameters

g	Vector of Gibbs free energies of the reference state. length = m_kk

Reimplemented from ThermoPhase.

Definition at line 333 of file LatticeSolidPhase.cpp.

References Cantera::GasConstant, LatticeSolidPhase::getGibbs_RT_ref(), Phase::m_kk, and Phase::temperature().

void initThermo ( )

virtual

Initialize the ThermoPhase object after all species have been set up.

Initialize.

This method is provided to allow subclasses to perform any initialization required after all species have been added. For example, it might be used to resize internal work arrays that must have an entry for each species. The base class implementation does nothing, and subclasses that do not require initialization do not need to overload this method. When importing a CTML phase description, this method is called from ThermoPhase::initThermoXML(), which is called from importPhase(), just prior to returning from function importPhase().

See Also: importCTML.cpp

Reimplemented from ThermoPhase.

Definition at line 418 of file LatticeSolidPhase.cpp.

References DATA_PTR, LatticeSolidPhase::initLengths(), ThermoPhase::initThermo(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, LatticeSolidPhase::m_x, and LatticeSolidPhase::setMoleFractions().

void initLengths ( )

Initialize vectors that depend on the number of species and sublattices.

Definition at line 435 of file LatticeSolidPhase.cpp.

References Phase::m_kk, LatticeSolidPhase::m_nlattice, LatticeSolidPhase::m_x, LatticeSolidPhase::theta_, and LatticeSolidPhase::tmpV_.

Referenced by LatticeSolidPhase::initThermo().

void installSlavePhases ( Cantera::XML_Node * phaseNode )

virtual

Add in species from Slave phases.

This hook is used for cSS_CONVENTION_SLAVE phases

Parameters

phaseNode XML_Node for the current phase

Reimplemented from ThermoPhase.

Definition at line 341 of file LatticeSolidPhase.cpp.

References Phase::addUniqueElementAfterFreeze(), Phase::addUniqueSpecies(), Phase::atomicNumber(), Phase::atomicWeights(), Phase::charge(), XML_Node::child(), CT_ELEM_TYPE_LATTICERATIO, DATA_PTR, Phase::elementIndex(), Phase::elementName(), Phase::elementType(), Phase::entropyElement298(), SpeciesThermoFactory::factory(), Phase::getAtoms(), XML_Node::getChildren(), Phase::id(), SpeciesThermoFactory::installThermoForSpecies(), Cantera::int2str(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, Phase::m_speciesComp, ThermoPhase::m_speciesData, ThermoPhase::m_spthermo, Phase::nElements(), Cantera::npos, Phase::nSpecies(), ThermoPhase::setSpeciesThermo(), Phase::size(), ThermoPhase::speciesData(), Phase::speciesName(), and LatticeSolidPhase::theta_.

void setParametersFromXML ( const XML_Node & eosdata )

virtual

Set equation of state parameter values from XML entries.

This method is called by function importPhase() in file importCTML.cpp when processing a phase definition in an input file. It should be overloaded in subclasses to set any parameters that are specific to that particular phase model. Note, this method is called before the phase is initialized with elements and/or species.

Parameters

eosdata An XML_Node object corresponding to the "thermo" entry for this phase in the input file.

Reimplemented from ThermoPhase.

Definition at line 479 of file LatticeSolidPhase.cpp.

References XML_Node::_require(), XML_Node::child(), Cantera::fpValueCheck(), XML_Node::getChildren(), ctml::getPairs(), Phase::id(), LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, Cantera::newPhase(), and LatticeSolidPhase::theta_.

void setLatticeMoleFractionsByName	(	int	n,
		const std::string &	x
	)

Set the Lattice mole fractions using a string.

Parameters

n	Integer value of the lattice whose mole fractions are being set
x	string containing Name:value pairs that will specify the mole fractions of species on a particular lattice

Definition at line 463 of file LatticeSolidPhase.cpp.

References DATA_PTR, LatticeSolidPhase::m_lattice, LatticeSolidPhase::m_nlattice, LatticeSolidPhase::m_x, and LatticeSolidPhase::setMoleFractions().

doublereal err ( const std::string & msg ) const

private

error routine

Parameters

msg Message