▶NCantera | Namespace for the Cantera kernel |
CAdsorbate | An adsorbed surface species |
▶CApplication | Class to hold global data |
CMessages | Class to carry out messages |
CThreadMessages | Class that stores thread messages for each thread, and retrieves them based on the thread id |
CAqueousKinetics | Kinetics manager for elementary aqueous-phase chemistry |
CArray2D | A class for 2D arrays stored in column-major (Fortran-compatible) form |
CArraySizeError | Array size error |
CArrhenius | Arrhenius reaction rate type depends only on temperature |
CArrhenius1 | Sum of Arrhenius terms |
CatomicWeightData | |
CAxiStagnFlow | A class for axisymmetric stagnation flows |
CBandMatrix | A class for banded matrices, involving matrix inversion processes |
CBdry1D | The base class for boundaries between one-dimensional spatial domains |
CBulkKinetics | Partial specialization of Kinetics for chemistry in a single bulk phase |
CC1 | Handles one species in a reaction |
CC2 | Handles two species in a single reaction |
CC3 | Handles three species in a reaction |
CC_AnyN | Handles any number of species in a reaction, including fractional stoichiometric coefficients, and arbitrary reaction orders |
CCachedValue | |
CCanteraError | Base class for exceptions thrown by Cantera classes |
CCELapackError | Exception thrown when an LAPACK error is encountered associated with inverting or solving a matrix |
CChebyshevRate | Pressure-dependent rate expression where the rate coefficient is expressed as a bivariate Chebyshev polynomial in temperature and pressure |
CChebyshevReaction | A pressure-dependent reaction parameterized by a bi-variate Chebyshev polynomial in temperature and pressure |
CChemEquil | Class ChemEquil implements a chemical equilibrium solver for single-phase solutions |
CChemicallyActivatedReaction | A reaction where the rate decreases as pressure increases due to collisional stabilization of a reaction intermediate |
CclockWC | The class provides the wall clock timer in seconds |
CComposite1 | Composite function |
CConst1 | Constant |
CConstCpPoly | A constant-heat capacity species thermodynamic property manager class |
CConstDensityThermo | Overloads the virtual methods of class ThermoPhase to implement the incompressible equation of state |
CConstPressureReactor | Class ConstPressureReactor is a class for constant-pressure reactors |
CCos1 | Cos |
CCoverageDependency | Modifications to an InterfaceReaction rate based on a surface species coverage |
CCVodesErr | Exception thrown when a CVODES error is encountered |
CCVodesIntegrator | Wrapper class for 'cvodes' integrator from LLNL |
CDAE_Solver | Wrapper for DAE solvers |
CDebyeHuckel | Class DebyeHuckel represents a dilute liquid electrolyte phase which obeys the Debye Huckel formulation for nonideality |
CDenseMatrix | A class for full (non-sparse) matrices with Fortran-compatible data storage, which adds matrix operations to class Array2D |
CDiff1 | Difference of two functions |
CDomain1D | Base class for one-dimensional domains |
CDustyGasTransport | Class DustyGasTransport implements the Dusty Gas model for transport in porous media |
CEdge | Convenience class which inherits from both EdgePhase and EdgeKinetics |
CEdgeKinetics | Heterogeneous reactions at one-dimensional interfaces between multiple adjacent two-dimensional surfaces |
CEdgePhase | A thermodynamic phase representing a one dimensional edge between two surfaces |
CElectrochemicalReaction | An interface reaction which involves charged species |
CElementaryReaction | A reaction which follows mass-action kinetics with a modified Arrhenius reaction rate |
CEmpty1D | A terminator that does nothing |
CEquilOpt | Chemical equilibrium options |
CExp1 | Exp |
CFactory | Factory class that supports registering functions to create objects |
CFactoryBase | Base class for factories |
CFalloff | Base class for falloff function calculators |
CFalloffFactory | Factory class to construct falloff function calculators |
CFalloffMgr | A falloff manager that implements any set of falloff functions |
CFalloffReaction | A reaction that is first-order in [M] at low pressure, like a third-body reaction, but zeroth-order in [M] as pressure increases |
CFixedChemPotSSTP | Class FixedChemPotSSTP represents a stoichiometric (fixed composition) incompressible substance |
CFlowDevice | Base class for 'flow devices' (valves, pressure regulators, etc.) connecting reactors |
CFlowReactor | Adiabatic flow in a constant-area duct |
CFourier1 | Fourier cosine/sine series |
CFreeFlame | A class for freely-propagating premixed flames |
CFunc1 | Base class for 'functor' classes that evaluate a function of one variable |
CFuncEval | Virtual base class for ODE right-hand-side function evaluators |
CGasKinetics | Kinetics manager for elementary gas-phase chemistry |
CGasTransport | Class GasTransport implements some functions and properties that are shared by the MixTransport and MultiTransport classes |
CGasTransportData | Transport data for a single gas-phase species which can be used in mixture-averaged or multicomponent transport models |
CGaussian | A Gaussian |
CGeneralMatrix | Generic matrix |
CGeneralSpeciesThermo | |
CGibbsExcessVPSSTP | |
CGroup | Class Group is an internal class used by class ReactionPath |
CHighPressureGasTransport | Class MultiTransport implements transport properties for high pressure gas mixtures |
CHMWSoln | Class HMWSoln represents a dilute or concentrated liquid electrolyte phase which obeys the Pitzer formulation for nonideality |
CIDA_Err | Exception thrown when a IDA error is encountered |
CIDA_Solver | Wrapper for Sundials IDA solver |
CIdealGasConstPressureReactor | Class ConstPressureReactor is a class for constant-pressure reactors |
CIdealGasMix | Convenience class which inherits from both IdealGasPhase and GasKinetics |
CIdealGasPhase | Class IdealGasPhase represents low-density gases that obey the ideal gas equation of state |
CIdealGasReactor | Class IdealGasReactor is a class for stirred reactors that is specifically optimized for ideal gases |
CIdealMolalSoln | This phase is based upon the mixing-rule assumption that all molality-based activity coefficients are equal to one |
CIdealSolidSolnPhase | Class IdealSolidSolnPhase represents a condensed phase ideal solution compound |
CIdealSolnGasVPSS | An ideal solution or an ideal gas approximation of a phase |
CImplicitSurfChem | Advances the surface coverages of the associated set of SurfacePhase objects in time |
CIncompressibleSolid | Wrapper for ConstDensityThermo with constructor from file |
CIndexError | An array index is out of range |
CInlet1D | An inlet |
CIntegrator | Abstract base class for ODE system integrators |
CInterface | An interface between multiple bulk phases |
▶CInterfaceKinetics | A kinetics manager for heterogeneous reaction mechanisms |
CStickData | Values used for converting sticking coefficients into rate constants |
CInterfaceReaction | A reaction occurring on an interface (i.e. a SurfPhase or an EdgePhase) |
CIonsFromNeutralVPSSTP | |
CisotopeWeightData | |
CKinetics | Public interface for kinetics managers |
CKineticsFactory | Factory for kinetics managers |
CLatticePhase | A simple thermodynamic model for a bulk phase, assuming a lattice of solid atoms |
CLatticeSolidPhase | A phase that is comprised of a fixed additive combination of other lattice phases |
CLiquidTranInteraction | Base class to handle transport property evaluation in a mixture |
CLiquidTransport | Class LiquidTransport implements models for transport properties for liquid phases |
CLiquidTransportData | Class LiquidTransportData holds transport parameters for a specific liquid-phase species |
CLiquidTransportParams | Class LiquidTransportParams holds transport model parameters relevant to transport in mixtures |
CLogger | Base class for 'loggers' that write text messages to log files |
CLTI_Log_MoleFracs | Mixing rule using logarithms of the mole fractions |
CLTI_MassFracs | Simple mass fraction weighting of transport properties |
CLTI_MoleFracs | Simple mole fraction weighting of transport properties |
CLTI_MoleFracs_ExpT | Simple mole fraction weighting of transport properties |
CLTI_Pairwise_Interaction | Transport properties that act like pairwise interactions as in binary diffusion coefficients |
CLTI_StefanMaxwell_PPN | Stefan Maxwell Diffusion Coefficients can be solved for given ion conductivity, mobility ratios, and self diffusion coeffs |
CLTPError | Exception thrown if an error is encountered while reading the transport database |
CLTPmodelError | Exception thrown if an error is encountered while reading the transport database |
CLTPspecies | Class LTPspecies holds transport parameterizations for a specific liquid- phase species |
CLTPspecies_Arrhenius | Class LTPspecies_Arrhenius holds transport parameters for a specific liquid- phase species (LTPspecies) when the transport property is expressed in Arrhenius form |
CLTPspecies_Const | Class LTPspecies_Const holds transport parameters for a specific liquid- phase species (LTPspecies) when the transport property is just a constant value |
CLTPspecies_ExpT | Class LTPspecies_ExpT holds transport parameters for a specific liquid- phase species (LTPspecies) when the transport property is expressed as an exponential in temperature |
CLTPspecies_Poly | Class LTPspecies_Poly holds transport parameters for a specific liquid-phase species (LTPspecies) when the transport property is expressed as a polynomial in temperature |
CMargulesVPSSTP | MargulesVPSSTP is a derived class of GibbsExcessVPSSTP that employs the Margules approximation for the excess Gibbs free energy |
CMaskellSolidSolnPhase | Class MaskellSolidSolnPhase represents a condensed phase non-ideal solution with 2 species following the thermodynamic model described in Maskell, Shaw, and Tye, Manganese Dioxide Electrode – IX, Electrochimica Acta 28(2) pp 231-235, 1983 |
CMassFlowController | A class for mass flow controllers |
CMetal | Wrapper for MetalPhase with constructor from file |
CMetalPhase | Class MetalPhase represents electrons in a metal |
CMetalSHEelectrons | Class MetalSHEelectrons represents electrons within a metal, adjacent to an aqueous electrolyte, that are consistent with the SHE reference electrode |
CMineralEQ3 | Class MineralEQ3 represents a stoichiometric (fixed composition) incompressible substance based on EQ3's parameterization |
CMixedSolventElectrolyte | MixedSolventElectrolyte is a derived class of GibbsExcessVPSSTP that employs the DH and local Margules approximations for the excess Gibbs free energy |
CMixTransport | Class MixTransport implements mixture-averaged transport properties for ideal gas mixtures |
CMixtureFugacityTP | This is a filter class for ThermoPhase that implements some preparatory steps for efficiently handling mixture of gases that whose standard states are defined as ideal gases, but which describe also non-ideal solutions |
CMMCollisionInt | Calculation of Collision integrals |
CMolalityVPSSTP | |
CMolarityIonicVPSSTP | |
CMu0Poly | Implements an interpolation of the Gibbs free energy based on a piecewise constant heat capacity approximation |
CMultiJac | Class MultiJac evaluates the Jacobian of a system of equations defined by a residual function supplied by an instance of class OneDim |
CMultiNewton | Newton iterator for multi-domain, one-dimensional problems |
CMultiPhase | A class for multiphase mixtures |
CMultiPhaseEquil | |
CMultiSpeciesThermo | A species thermodynamic property manager for a phase |
CMultiTransport | Class MultiTransport implements multicomponent transport properties for ideal gas mixtures |
CNasa9Poly1 | The NASA 9 polynomial parameterization for one temperature range |
CNasa9PolyMultiTempRegion | The NASA 9 polynomial parameterization for a single species encompassing multiple temperature regions |
CNasaPoly1 | The NASA polynomial parameterization for one temperature range |
CNasaPoly2 | The NASA polynomial parameterization for two temperature ranges |
CNotImplementedError | An error indicating that an unimplemented function has been called |
COneDim | Container class for multiple-domain 1D problems |
COutlet1D | An outlet |
COutletRes1D | An outlet with specified composition |
CPDSS | Virtual base class for a species with a pressure dependent standard state |
CPDSS_ConstVol | Class for pressure dependent standard states that use a constant volume model |
CPDSS_HKFT | Class for pressure dependent standard states corresponding to ionic solutes in electrolyte water |
CPDSS_IdealGas | Derived class for pressure dependent standard states of an ideal gas species |
CPDSS_IonsFromNeutral | Derived class for pressure dependent standard states of an ideal gas species |
CPDSS_Molar | Base class for PDSS classes which compute molar properties directly |
CPDSS_Nondimensional | Base class for PDSS classes which compute nondimensional properties directly |
CPDSS_SSVol | Class for pressure dependent standard states that uses a standard state volume model of some sort |
CPDSS_Water | Class for the liquid water pressure dependent standard state |
CPeriodic1 | Periodic function |
CPhase | Class Phase is the base class for phases of matter, managing the species and elements in a phase, as well as the independent variables of temperature, mass density, species mass/mole fraction, and other generalized forces and intrinsic properties (such as electric potential) that define the thermodynamic state |
CPhaseCombo_Interaction | PhaseCombo_Interaction is a derived class of GibbsExcessVPSSTP that employs the Margules approximation for the excess Gibbs free energy while eliminating the entropy of mixing term |
CPlog | Pressure-dependent reaction rate expressed by logarithmically interpolating between Arrhenius rate expressions at various pressures |
CPlogReaction | A pressure-dependent reaction parameterized by logarithmically interpolating between Arrhenius rate expressions at various pressures |
CPlusConstant1 | A function plus a constant |
CPoly1 | Polynomial of degree n |
CPow1 | Pow |
CPressureController | A class for flow controllers where the flow rate is equal to the flow rate of a "master" mass flow controller plus a correction proportional to the pressure difference between the inlet and outlet |
CProduct1 | Product of two functions |
CPureFluid | Wrapper for PureFluidPhase with constructor from file |
CPureFluidPhase | This phase object consists of a single component that can be a gas, a liquid, a mixed gas-liquid fluid, or a fluid beyond its critical point |
CRate1 | This rate coefficient manager supports one parameterization of the rate constant of any type |
CRatio1 | Ratio of two functions |
CReactingSurf1D | A reacting surface |
CReaction | Intermediate class which stores data about a reaction and its rate parameterization so that it can be added to a Kinetics object |
CReactionPathDiagram | Reaction path diagrams (graphs) |
CReactor | Class Reactor is a general-purpose class for stirred reactors |
CReactorBase | Base class for stirred reactors |
CReactorNet | A class representing a network of connected reactors |
CRedlichKisterVPSSTP | RedlichKisterVPSSTP is a derived class of GibbsExcessVPSSTP that employs the Redlich-Kister approximation for the excess Gibbs free energy |
CRedlichKwongMFTP | Implementation of a multi-species Redlich-Kwong equation of state |
CRefiner | Refine Domain1D grids so that profiles satisfy adaptation tolerances |
CResidData | A simple class to hold an array of parameter values and a pointer to an instance of a subclass of ResidEval |
CResidEval | Virtual base class for DAE residual function evaluators |
CResidJacEval | Wrappers for the function evaluators for Nonlinear solvers and Time steppers |
▶CRootFind | Root finder for 1D problems |
CrfTable | Structure containing the iteration history |
CSemiconductorPhase | Class SemiconductorPhase represents electrons and holes in a semiconductor |
CShomatePoly | The Shomate polynomial parameterization for one temperature range for one species |
CShomatePoly2 | The Shomate polynomial parameterization for two temperature ranges for one species |
CSim1D | One-dimensional simulations |
CSimpleTransport | Class SimpleTransport implements mixture-averaged transport properties for liquid phases |
CSin1 | Implements the sin() function |
CSingleSpeciesTP | Filter class for ThermoPhase |
CSolidTransport | Class SolidTransport implements transport properties for solids |
CSolidTransportData | Class SolidTransportData holds transport parameters for a specific solid- phase species |
CsolveSP | Method to solve a pseudo steady state surface problem |
CSpecies | Contains data about a single chemical species |
CSpeciesNode | Nodes in reaction path graphs |
CSpeciesThermo | |
CSpeciesThermoInterpType | Abstract Base class for the thermodynamic manager for an individual species' reference state |
CSquareMatrix | A class for full (non-sparse) matrices with Fortran-compatible data storage |
CSRI | The SRI falloff function |
CStFlow | This class represents 1D flow domains that satisfy the one-dimensional similarity solution for chemically-reacting, axisymmetric flows |
CSTITbyPDSS | Class for the thermodynamic manager for an individual species' reference state which uses the PDSS base class to satisfy the requests |
CStoichSubstance | Class StoichSubstance represents a stoichiometric (fixed composition) incompressible substance |
CSum1 | Sum of two functions |
CSurf1D | A non-reacting surface |
CSurfaceArrhenius | An Arrhenius rate with coverage-dependent terms |
CSurfPhase | A simple thermodynamic model for a surface phase, assuming an ideal solution model |
CSymm1D | A symmetry plane |
CThermoFactory | Factory class for thermodynamic property managers |
CThermoPhase | Base class for a phase with thermodynamic properties |
CThirdBody | A class for managing third-body efficiencies, including default values |
CThirdBodyCalc | Calculate and apply third-body effects on reaction rates, including non- unity third-body efficiencies |
CThreeBodyReaction | A reaction with a non-reacting third body "M" that acts to add or remove energy from the reacting species |
CtimesConstant | Unary operator to multiply the argument by a constant |
CTimesConstant1 | Product of two functions |
CTortuosity | Specific Class to handle tortuosity corrections for diffusive transport in porous media using the Bruggeman exponent |
CTortuosityMaxwell | This class implements transport coefficient corrections appropriate for porous media with a dispersed phase |
CTortuosityPercolation | This class implements transport coefficient corrections appropriate for porous media where percolation theory applies |
CTransport | Base class for transport property managers |
CTransportData | Base class for transport data for a single species |
CTransportDBError | Exception thrown if an error is encountered while reading the transport database |
CTransportFactory | Factory class for creating new instances of classes derived from Transport |
CTransportParams | Base structure to hold transport model parameters |
CTroe | The 3- or 4-parameter Troe falloff parameterization |
CUnit | Unit conversion utility |
CUnknownThermoPhaseModel | Specific error to be thrown if the type of Thermo manager is unrecognized |
CUnknownVPSSMgrModel | Throw a named error for an unknown or missing vpss species thermo model |
CValueCache | |
CValve | Supply a mass flow rate that is a function of the pressure drop across the valve |
CVCS_COUNTERS | Class to keep track of time and iterations |
Cvcs_MultiPhaseEquil | Cantera's Interface to the Multiphase chemical equilibrium solver |
CVCS_PROB | Interface class for the vcs thermo equilibrium solver package, which generally describes the problem to be solved |
CVCS_SOLVE | This is the main structure used to hold the internal data used in vcs_solve_TP(), and to solve TP systems |
CVCS_SPECIES_THERMO | |
Cvcs_SpeciesProperties | Properties of a single species |
Cvcs_VolPhase | Phase information and Phase calculations for vcs |
CVPSSMgr | Virtual base class for the classes that manage the calculation of standard state properties for all the species in a phase |
CVPSSMgr_ConstVol | Constant Molar Volume e VPSS species thermo manager class |
CVPSSMgr_General | Class that handles the calculation of standard state thermo properties for a set of species belonging to a single phase in a completely general but slow way |
CVPSSMgr_IdealGas | A VPSSMgr where all species in the phase obey an ideal gas equation of state |
CVPSSMgr_Water_ConstVol | Handles the calculation of standard state thermo properties for real water and a set of species which have a constant molar volume pressure dependence |
CVPSSMgr_Water_HKFT | Manages standard state thermo properties for real water and a set of species which have the HKFT equation of state |
CVPSSMgrFactory | Factory to build instances of classes that manage the standard-state thermodynamic properties of a set of species |
CVPStandardStateTP | This is a filter class for ThermoPhase that implements some prepatory steps for efficiently handling a variable pressure standard state for species |
CWall | Represents a wall between between two ReactorBase objects |
CWaterProps | Used to house several approximation routines for properties of water |
CWaterPropsIAPWS | Class for calculating the equation of state of water |
CWaterPropsIAPWSphi | Low level class for the real description of water |
CWaterSSTP | Class for single-component water |
CWaterTransport | Transport Parameters for pure water |
CXML_Error | Classs representing a generic XML error condition |
CXML_NoChild | Class representing a specific type of XML file formatting error |
CXML_Node | Class XML_Node is a tree-based representation of the contents of an XML file |
CXML_Reader | Class XML_Reader reads an XML file into an XML_Node object |
CXML_TagMismatch | Class representing a specific type of XML file formatting error |
▶Ntpx | |
CCarbonDioxide | Pure species representation of carbon dioxide |
CHeptane | Pure species representation of heptane |
CHFC134a | Equation of state for HFC-134a |
Chydrogen | Pure species representation of hydrogen |
Cleekesler | |
Cmethane | Pure species representation of methane |
Cnitrogen | Pure species representation of nitrogen |
Coxygen | Pure species representation of oxygen |
CRedlichKwong | |
CSubstance | |
Cwater | Pure species representation of water |