Cantera

Previous topic

diamond_cvd.py

Next topic

Matlab Interface User’s Guide

This Page

Warning

This documentation is for an old version of Cantera. You can find docs for newer versions here.

sofc.py

"""
SOFC

This script implements a simple model of a solid oxide fuel cell. Unlike most
SOFC models, however, it does not use semi-empirical Butler-Volmer kinetics
for the charge transfer reactions, but uses elementary, reversible reactions
obeying mass-action kinetics for all reactions, including charge transfer. As
this script will demonstrate, this approach allows computing the OCV (it does
not need to be separately specified), as well as polarization curves.

NOTE: The parameters here, and in the input file sofc.cti, are not to be
relied upon for a real SOFC simulation! They are meant to illustrate only how
to do such a calculation in Cantera. While some of the parameters may be close
to real values, others are simply set arbitrarily to give reasonable-looking
results.

It is recommended that you read input file sofc.cti before reading or running
this script!
"""

import cantera as ct
import math
import csv
import inspect
import os

ct.add_module_directory()

# parameters
T = 1073.15  # T in K
P = ct.one_atm

# gas compositions. Change as desired.
anode_gas_X = 'H2:0.97, H2O:0.03'
cathode_gas_X = 'O2:1.0, H2O:0.001'

# time to integrate coverage eqs. to steady state in
# 'advanceCoverages'. This should be more than enough time.
tss = 50.0

sigma = 2.0  # electrolyte conductivity [Siemens / m]
ethick = 5.0e-5  # electrolyte thickness [m]
TPB_length_per_area = 1.0e7  # TPB length per unit area [1/m]


def show_coverages(s):
    """Print the coverages for surface s."""
    print('\n{0}\n'.format(s.name))
    cov = s.coverages
    names = s.species_names
    for n in range(s.n_species):
        print('{0:16s}  {1:13.4g}'.format(names[n], cov[n]))


def equil_OCV(gas1, gas2):
    return (-ct.gas_constant * gas1.T *
        math.log(gas1['O2'].X / gas2['O2'].X) / (4.0*ct.faraday))


def NewtonSolver(f, xstart, C=0.0):
    """
    Solve f(x) = C by Newton iteration.
    - xstart    starting point for Newton iteration
    - C         constant
    """
    f0 = f(xstart) - C
    x0 = xstart
    dx = 1.0e-6
    n = 0
    while n < 200:
        ff = f(x0 + dx) - C
        dfdx = (ff - f0)/dx
        step = - f0/dfdx

        # avoid taking steps too large
        if abs(step) > 0.1:
            step = 0.1*step/abs(step)

        x0 += step
        emax = 0.00001  # 0.01 mV tolerance
        if abs(f0) < emax and n > 8:
            return x0
        f0 = f(x0) - C
        n += 1
    raise Exception('no root!')

#####################################################################
# Anode-side phases
#####################################################################

# import the anode-side bulk phases
gas_a, anode_bulk, oxide_a = ct.import_phases('sofc.cti',
                                              ['gas', 'metal', 'oxide_bulk',])

# import the surfaces on the anode side
anode_surf = ct.Interface('sofc.cti', 'metal_surface', [gas_a])
oxide_surf_a = ct.Interface('sofc.cti', 'oxide_surface', [gas_a, oxide_a])

# import the anode-side triple phase boundary
tpb_a = ct.Interface('sofc.cti', 'tpb', [anode_bulk, anode_surf, oxide_surf_a])

anode_surf.name = 'anode surface'
oxide_surf_a.name = 'anode-side oxide surface'


# this function is defined to use with NewtonSolver to invert the current-
# voltage function. NewtonSolver requires a function of one variable, so the
# other objects are accessed through the global namespace.
def anode_curr(E):
    """
    Current from the anode as a function of anode potential relative to
    electrolyte.
    """

    # the anode-side electrolyte potential is kept at zero. Therefore, the
    # anode potential is just equal to E.
    anode_bulk.electric_potential = E

    # get the species net production rates due to the anode-side TPB reaction
    # mechanism. The production rate array has the values for the neighbor
    # species in the order listed in the .cti file, followed by the tpb phase.
    # Since the first neighbor phase is the bulk metal, species 0 is the
    # electron.
    w = tpb_a.net_production_rates

    # the sign convention is that the current is positive when
    # electrons are being delivered to the anode - i.e. it is positive
    # for fuel cell operation.
    return ct.faraday * w[0] * TPB_length_per_area


#####################################################################
# Cathode-side phases
#####################################################################

# Here for simplicity we are using the same phase and interface models for the
# cathode as we used for the anode. In a more realistic simulation, separate
# models would be used for the cathode, with a different reaction mechanism.

# import the cathode-side bulk phases
gas_c, cathode_bulk, oxide_c = ct.import_phases('sofc.cti',
                                                ['gas', 'metal', 'oxide_bulk'])

# import the surfaces on the cathode side
cathode_surf = ct.Interface('sofc.cti', 'metal_surface', [gas_c])
oxide_surf_c = ct.Interface('sofc.cti', 'oxide_surface', [gas_c, oxide_c])

# import the cathode-side triple phase boundary
tpb_c = ct.Interface('sofc.cti', 'tpb', [cathode_bulk, cathode_surf,
                                         oxide_surf_c])

cathode_surf.name = 'cathode surface'
oxide_surf_c.name = 'cathode-side oxide surface'


def cathode_curr(E):
    """Current to the cathode as a function of cathode
    potential relative to electrolyte"""

    # due to ohmic losses, the cathode-side electrolyte potential is non-zero.
    # Therefore, we need to add this potential to E to get the cathode
    # potential.
    cathode_bulk.electric_potential = E + oxide_c.electric_potential

    # get the species net production rates due to the cathode-side TPB
    # reaction mechanism. The production rate array has the values for the
    # neighbor species in the order listed in the .cti file, followed by the
    # tpb phase. Since the first neighbor phase is the bulk metal, species 0
    # is the electron.
    w = tpb_c.net_production_rates

    # the sign convention is that the current is positive when electrons are
    # being drawn from the cathode (i.e, negative production rate).
    return -ct.faraday * w[0] * TPB_length_per_area

# initialization

# set the gas compositions, and temperatures of all phases

gas_a.TPX = T, P, anode_gas_X
gas_a.equilibrate('TP')  # needed to use equil_OCV

gas_c.TPX = T, P, cathode_gas_X
gas_c.equilibrate('TP')  # needed to use equil_OCV

phases = [anode_bulk, anode_surf, oxide_surf_a, oxide_a, cathode_bulk,
          cathode_surf, oxide_surf_c, oxide_c, tpb_a, tpb_c]
for p in phases:
    p.TP = T, P

# now bring the surface coverages into steady state with these gas
# compositions. Note that the coverages are held fixed at these values - we do
# NOT consider the change in coverages due to TPB reactions. For that, a more
# complex model is required. But as long as the thermal chemistry is fast
# relative to charge transfer, this should be an OK approximation.
for s in [anode_surf, oxide_surf_a, cathode_surf, oxide_surf_c]:
    s.advance_coverages(tss)
    show_coverages(s)


# find open circuit potentials by solving for the E values that give
# zero current.
Ea0 = NewtonSolver(anode_curr, xstart=-0.51)
Ec0 = NewtonSolver(cathode_curr, xstart=0.51)

print('\nocv from zero current is: ', Ec0 - Ea0)
print('OCV from thermo equil is: ', equil_OCV(gas_a, gas_c))

print('Ea0 = ', Ea0)
print('Ec0 = ', Ec0)
print()

# do polarization curve for anode overpotentials from -250 mV
# (cathodic) to +250 mV (anodic)
Ea_min = Ea0 - 0.25
Ea_max = Ea0 + 0.25

csvfile = open('sofc.csv', 'w')
writer = csv.writer(csvfile)
writer.writerow(['i (mA/cm2)', 'eta_a', 'eta_c', 'eta_ohmic', 'Eload'])

# vary the anode overpotential, from cathodic to anodic polarization
for n in range(100):
    Ea = Ea_min + 0.005*n

    # set the electrode potential. Note that the anode-side electrolyte is
    # held fixed at 0 V.
    anode_bulk.electric_potential = Ea

    # compute the anode current
    curr = anode_curr(Ea)

    # set potential of the oxide on the cathode side to reflect the ohmic drop
    # through the electrolyte
    delta_V = curr * ethick / sigma

    # if the current is positive, negatively-charged ions are flowing from the
    # cathode to the anode. Therefore, the cathode side must be more negative
    # than the anode side.
    phi_oxide_c = -delta_V

    # note that both the bulk and the surface potentials must be set
    oxide_c.electric_potential = phi_oxide_c
    oxide_surf_c.electric_potential = phi_oxide_c

    # Find the value of the cathode potential relative to the cathode-side
    # electrolyte that yields the same current density as the anode current
    # density
    Ec = NewtonSolver(cathode_curr, xstart=Ec0+0.1, C=curr)

    cathode_bulk.electric_potential = phi_oxide_c + Ec

    # write the current density, anode and cathode overpotentials, ohmic
    # overpotential, and load potential
    writer.writerow([0.1*curr, Ea - Ea0, Ec - Ec0, delta_V,
                     cathode_bulk.electric_potential -
                     anode_bulk.electric_potential])

print('polarization curve data written to file sofc.csv')

csvfile.close()