Compilation Requirements#

Click the buttons below to see the required software that you must install to compile Cantera on your operating system.

Conda & Anaconda#

General Notes#

  • These instructions will set you up to build Cantera with the dependencies installed in a Conda environment

  • You will need to install compilers for your system by following the instructions in the sections below to install the compiler for your operating system.

  • By default, Cantera is installed into the active conda environment, where the layout of the directory structure corresponds to the configuration option layout=conda.

Conda Requirements#

  • Install Anaconda, Miniconda, or Miniforge.

  • Launch the command line interface:

    • On macOS and Linux, the installer should add the appropriate activation mechanism for your normal terminal by default. You can test this by running

      conda --version
      

      in the terminal. If there is no output or an error appears, locate your Conda installation and run the following code in the terminal:

      /path/to/conda/install/folder/bin/conda init --all
      

      Then restart your terminal or shell.

    • On Windows, use the Anaconda PowerShell to run the build process (available from the Start Menu). When using MSVC compilers, you also need to set environment variables for x64-native tools (see Developer command file locations) by running

      . "C:\path\to\MSVC\Auxiliary\Build\vcvars64.bat"
      

      (note that the period '.' is part of the command). The path can be found as follows: locate the x64 Native Tools Command Prompt in the Start Menu, right-click, select More > Open File Location, right-click on the shortcut, select Properties and copy the Target command.

  • Create an environment ct-build with the dependencies to build Cantera. Create a file called environment.yaml with the following content

    name: ct-build
    channels:
    - conda-forge
    dependencies:
    - python  # Cantera supports Python 3.8 and up
    - scons  # build system
    - boost-cpp  # C++ dependency
    - hdf5  # optional C++ dependency
    # - highfive  # C++ dependency; uncomment to override Cantera default
    # - sundials  # uncomment to override Cantera default
    # - fmt  # uncomment to override Cantera default
    # - eigen  # uncomment to override Cantera default
    # - yaml-cpp  # uncomment to override Cantera default
    # - libgomp  # optional (OpenMP implementation when using GCC)
    - cython  # needed to build Python package
    - numpy  # needed to build Python package
    - pip  # needed to build Python package
    - wheel  # needed to build Python package
    - setuptools  # needed to build Python package
    - pytest  # needed for the Python test suite
    # - pytest-cov  # optional (needed if running with test coverage enabled)
    - ruamel.yaml  # needed for converter scripts
    # - pandas  # optional (needed for pandas interface)
    # - scipy  # optional (needed for some examples)
    # - matplotlib  # optional (needed for plots)
    # - python-graphviz  # optional (needed for reaction path diagrams)
    - ipython  # optional (needed for nicer interactive command line)
    # - jupyter  # optional (needed for Jupyter Notebook)
    # - sphinx  # optional (needed for documentation)
    # - pydata-sphinx-theme  # optional (needed for documentation)
    # - sphinx-argparse  # optional (needed for documentation)
    # - doxygen  # optional (needed for documentation)
    # - graphviz  # optional (needed for documentation)
    # - texlive-core  # optional (needed for documentation)
    # - perl  # optional (needed for documentation)
    # - pip:  # optional (list of PyPI managed packages)
    #   - sphinxcontrib-matlabdomain  # optional (needed for documentation)
    #   - sphinxcontrib-doxylink  # optional (needed for documentation)
    

    The environment is then created and activated using

    conda env create -f environment.yaml
    conda activate ct-build
    

    After creating the environment, it can be updated from within ct-build using

    conda env update -f environment.yaml --prune
    
  • (Optional) If you want to override external libraries packaged with Cantera (sundials, fmt, eigen, yaml-cpp), simply uncomment corresponding lines in the file environment.yaml above. Note that specific versions can be forced by providing version numbers (example: replace sundials by sundials=5.8 to install version 5.8).

  • (Optional) If you want to build the documentation, make sure to uncomment lines for pip, sphinx, doxygen, and any other lines marked as “needed for documentation” in the environment.yaml sample above.

  • (Cantera < 2.6 only) On previous Cantera versions, the build process required configuration options boost_inc_dir and prefix (see configuration options); starting with Cantera 2.6, these settings are detected automatically.

Note

As the compiled code is based on the conda environment ct-build, it is only usable from within that environment. This means that in order to use the compiled Cantera package, you have to activate your ct-build environment first.

Next: Download the Source Code

Linux#

General Notes#

  • To download the source code, installing git is highly recommended in addition to the requirements listed below.

  • The following instructions use the system-installed versions of Python, but alternate installations such as the Anaconda distribution of Python can be used as well.

  • Cython is only required to be installed for the version of Python that also has SCons installed; following the instructions below will install Cython for the version of Python installed in the system directories. The minimum compatible Cython version is 0.29.31. If your distribution does not contain a suitable version, you may be able to install a more recent version using Pip.

  • Users of other distributions should install the equivalent packages, which may have slightly different names.

  • In addition to the operating systems below, Cantera should work on any Unix-like system where the necessary prerequisites are available, but some additional configuration may be required.

Ubuntu & Debian#

  • Ubuntu 20.04 LTS (Focal Fossa) or newer

  • Debian 11.0 (Bullseye) or newer

  • The following packages must be installed to build any of the Cantera modules using your choice of package manager:

    g++ python3 scons libboost-dev libhdf5-dev
    
    • The HDF5 headers and libraries are not installed to directories on the compiler’s default search path. When building Cantera, these paths need to be specified as options to scons, for example extra_inc_dirs=/usr/include/hdf5/serial and extra_lib_dirs=/usr/lib/x86_64-linux-gnu/hdf5/serial.

  • If you want to use system system packages to provide the following dependencies, instead of the versions bundled with Cantera, you should also install:

    libsundials-dev libeigen3-dev libyaml-cpp-dev libfmt-dev
    
  • In addition to the general packages, building the Python 3 module also requires:

    cython3 python3-setuptools python3-wheel python3-numpy python3-ruamel.yaml python3-pytest
    
    • Debian 12.0 (Bookworm) and Ubuntu 23.04 (Lunar Lobster) provide compatible Cython versions. For older releases, install Cython using Pip.

  • In addition to the general packages, building the Fortran module also requires:

    gfortran
    
  • In addition to the general packages, building the MATLAB toolbox also requires:

    • MATLAB version later than 2009a

      • Typically installed to:

        /opt/MATLAB/R20YYn
        

        where YY is a two digit year and n is either a or b

Next: Download the Source Code

Fedora & RHEL#

  • The following packages must be installed to build any of the Cantera modules using your choice of package manager:

    gcc-c++ python3 scons boost-devel hdf5-devel
    
  • If you want to use system system packages to provide the following dependencies, instead of the versions bundled with Cantera, you should also install:

    sundials-devel eigen3-devel yaml-cpp-devel fmt-devel highfive-devel

  • In addition to the general packages, building the Python 3 module also requires:

    python3-devel Cython python3-numpy python3-ruamel-yaml python3-pytest
    
  • In addition to the general packages, building the Fortran module also requires:

    gcc-gfortran
    
  • In addition to the general packages, building the MATLAB toolbox also requires:

    • MATLAB version later than 2009a

      • Typically installed to:

        /opt/MATLAB/R20YYn
        

        where YY is a two digit year and n is either a or b

Next: Download the Source Code

OpenSUSE & SUSE Linux Enterprise#

  • OpenSUSE Leap 15.5 or newer recommended

  • The following packages must be installed to build any of the Cantera modules using your choice of package manager:

    gcc11-c++ python311 libboost_headers1_75_0-devel hdf5-devel python311-pip
    

    You can specify other version numbers for GCC, Python, and Boost, as long as they meet Cantera’s minimum requirements.

  • You will also need to install scons using the Pip version installed above.

  • In addition to the general packages, building the Python module also requires:

    python3-devel
    

    as well as the following packages installed using Pip:

    numpy wheel cython ruamel.yaml pytest

  • In addition to the general packages, building the Fortran module also requires:

    gcc11-fortran
    
  • In addition to the general packages, building the MATLAB toolbox also requires:

    • MATLAB version later than 2009a

      • Typically installed to:

        /opt/MATLAB/R20YYn
        

        where YY is a two digit year and n is either a or b

Next: Download the Source Code

Windows#

General Notes#

  • The build process will produce a Python module compatible with the version of Python used for the compilation. To generate different modules for other versions of Python, you will need to install those versions of Python and recompile.

  • The following instructions use the versions of Python downloaded from https://www.python.org/downloads/, but alternate installations such as the Anaconda distribution of Python can be used as well.

  • If you want to build the Matlab toolbox and you have a 64-bit copy of Windows, by default you will be using a 64-bit copy of Matlab, and therefore you need to compile Cantera in 64-bit mode. For simplicity, it is highly recommended that you use a 64-bit version of Python to handle this automatically.

  • It is generally helpful to have SCons and Python in your PATH environment variable. This can be done by checking the appropriate box during the installation of Python or can be accomplished by adding the top-level Python directory and the Scripts subdirectory (for example, C:\Python311;C:\Python311\Scripts) to your PATH. The dialog to change the PATH is accessible from:

    Control Panel > System and Security > System > Advanced System Settings > Environment Variables
    

    Make sure that the installation of Python that has SCons comes first on your PATH.

  • In order to use SCons to install Cantera to a system folder (for example, C:\Program Files\Cantera) you must run the scons install command in a command prompt that has been launched by selecting the Run as Administrator option.

Windows Requirements#

  • Windows 7 or later; either 32-bit or 64-bit

  • To build any of the Cantera modules, you will need to install

  • In addition to the general software, building the Python module also requires several Python packages: Cython, NumPy, setuptools, wheel, ruamel.yaml, and pytest. All of these can be installed using pip:

    py -m pip install setuptools wheel cython numpy ruamel.yaml pytest
    
  • In addition to the general software, building the MATLAB toolbox also requires:

    • MATLAB version later than 2009a

      • Typically installed to:

        C:\Program Files\MATLAB\R20YYn
        

        where YY is a two digit year and n is either a or b

Next: Download the Source Code

macOS#

General Notes#

  • Cantera 2.5.0 and higher do not support Python 2, which may be installed by default on your computer. You must install Python 3 from another source to be able to build Cantera. The instructions below use Homebrew.

macOS Requirements#

  • macOS 10.15 (Catalina) is required; Homebrew requires 11.0 or newer.

  • To build any of the Cantera interfaces, you will need to install

    • Xcode

      • Download and install from the App Store

      • From a Terminal, run:

        sudo xcode-select --install
        

        and agree to the Xcode license agreement

    • Homebrew

      • https://brew.sh

      • From a Terminal, run:

        /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
        
    • Once Homebrew is installed, the rest of the dependencies can be installed with:

      brew install python scons boost git hdf5 libomp
      

      Note that brew installs Python 3 by default, but does not over-write the existing system Python. When you want to use the brew-installed Python, check to make sure that python3 and pip3 refer to the Homebrew installation by running:

      which python3
      which pip3
      

      If these commands do not include the Homebrew path, you can run the correct ones as $(brew --prefix)/bin/python3 and $(brew --prefix)/bin/pip3.

  • In addition to the general software, building the Python module also requires:

    $(brew --prefix)/bin/pip3 install cython numpy wheel setuptools ruamel.yaml pytest
    
  • In addition to the general software, building the Fortran module also requires:

    brew install gcc
    
  • In addition to the general software, building the MATLAB toolbox also requires:

    • MATLAB version later than 2009a

      • Typically installed to:

        /Applications/MATLAB_R20YYn.app
        

        where YY is a two digit year and n is either a or b

  • The Homebrew header and library directories will not be on the path for the system compiler (Xcode), so when compiling Cantera, you will need to provide the command line options extra_inc_dirs=$(brew --prefix)/include and extra_lib_dirs=$(brew --prefix)/lib.

Next: Download the Source Code